My base just shipped today #675, I got on the list 2/2
My base just shipped today #675, I got on the list 2/2
BThanks!
AReview in a couple months
FStoked to get mine when it’s finally time
AI'm so excited to get going I have SO MUCH learning to do
HH
HA short maybe, or a loose connection?
HHmmmm. The strange thing is that it occurs only when the board is DC powered.
HI’ll check the connections
SFLCS modded to fit TM/Rhino?
HSimple TM grip on rhino board
WAnother fifty just dropped out the last few days I see, thanks guys. 
. Really hoping I can get mine in November ready for FS2024’s release. 
. Really hoping I can get mine in November ready for FS2024’s release. 
BI would love to have SN 774 even if it pushes me back in the line
SYeah when I got mine there was also a big drop in numbers, shouldn't get discouraged by the current position
V:package: 
RHINO #0678 Has Shipped!
RHINO #0678 Has Shipped!V:package: 
RHINO #0679 Has Shipped!
RHINO #0679 Has Shipped!
KWoohoo that's mine
V:package: 
RHINO #0680 Has Shipped!
RHINO #0680 Has Shipped!
AMine started at 990, my SN is 675
WIf the wire is long from the grip to the board it might pickup noise - I recommend using a shielded cable or adding a ferrite choke with a one/few turns
Zand has been received 
can't wait to get home and set it up.
can't wait to get home and set it up.
MHi, can someone explain the 3 different DC motors offered on the VPForce website, 57BLF03, 86BLF04 and 86BLF03?
I would like to get single motor and controller to build a collective…..which motor is best for this DIY project. Ta
I would like to get single motor and controller to build a collective…..which motor is best for this DIY project. Ta
TFirst two numbers are the dimensions of the motors 57mm vs 86mm. The 86 are bigger motors than the 57 but the 86BLF04 is bigger (longer) than the 86BLF03. Bigger motor means more force.
I think for collective, most people are doing 86 series. 03 would probably be fine but for only 20€ more, you can get the stronger 04 motor kit.
I think for collective, most people are doing 86 series. 03 would probably be fine but for only 20€ more, you can get the stronger 04 motor kit.
TFrom the FAQ:
What kind of motor are available?
Three types of motors are available:
57BLF03 - 57x101mm - 1.6Nm peak - 1.24kg - NEMA23 [used in the RHINO base]
86BLF03 - 86x81mm - 3.2Nm peak - 2.2kg - NEMA34
86BLF04 - 86x94mm - 4.2Nm peak - 2.75kg - NEMA34
What kind of motor are available?
Three types of motors are available:
57BLF03 - 57x101mm - 1.6Nm peak - 1.24kg - NEMA23 [used in the RHINO base]
86BLF03 - 86x81mm - 3.2Nm peak - 2.2kg - NEMA34
86BLF04 - 86x94mm - 4.2Nm peak - 2.75kg - NEMA34
SHas the price of 800 € for the base at some point changed from VAT included to VAT excluded? In February at least an invoice to Finland was 800 €, tax included, but mine just now was 800 €, tax excluded. It's a pretty substantial change.
WYes, since July (mentioned on the order page)
Sstill worth it imho 
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
SIndeed
DI used the 86BLF03 on a Virpil collective. Great mod and the collective is so much better than the bike damper and counterweight I was using before.
KCan you share the mod please? I'm thinking about buying a Virpil collective and would love to have FFB on it.
Syep, interesting!
MThanks for the info…..looked for it but missed that FAQ.
MI to would be interested in the mod……save having to re-invent the wheel with a new DIY unit. Thanks
DI used the mod by @Tinman here https://discord.com/channels/965234441511383080/1212775841193267270/1215550233853956167
DI will post a picture of my build tomorrow (late here).
V:package: 
RHINO #0681 Has Shipped!
RHINO #0681 Has Shipped!V:package: 
RHINO #0682 Has Shipped!
RHINO #0682 Has Shipped!
Jhttps://forum.virpil.com/index.php?/topic/21852-advanced-flight-yoke-project-briefing/
tldr Virpil Civil Aviation yoke is a kickstarter project
FFB explicitly mentioned as not being a feature yet and that they are working on it in the future
tldr Virpil Civil Aviation yoke is a kickstarter project
FFB explicitly mentioned as not being a feature yet and that they are working on it in the future
Force Feedback?
The VIRPIL Advanced Flight Yoke Project will not be an FFB device.
We are still working hard on FFB to provide the best solution available. Our team has noted numerous issues with the implementation of other solutions as confirmed by other active-duty pilots. FFB in flight-sim software is young and we do not want to raise the cost of the device, potentially pushing it out of reach of many pilots for feature implementations that are not quite ready.
We have an FFB industry expert on our team to help us achieve the best, but the best takes time! Backers of the VIRPIL Advanced Flight Yoke Project will receive preferential terms to any future FFB developments in our Civil Aviation controller segment.
VIRPIL Controls
Hello VIRPILs! As you’ve seen from our latest teasers, we are bringing something truly exciting to virtual pilots around the world… Introducing the VIRPIL Controls Advanced Flight Yoke Project! We are incredibly excited to talk about our first project in the general aviation control segment, and ...
Jbets for how long it will take for someone on this discord to get one, tear it apart and see if they can adapt it for ffb lol
J1-2 months for fully functional working build if someone is determined
J(I'm not - I'll just wait for the official FFB version, even though it will likely be twice the price)
Yi was just about to say that will be probably just an angle connector to rhino definitely ill give a try
BIts not ffb already? kind og makes the bulk seem unnecessary 
BHonestly it looks then like a very hard sell as I could just go buy a honeycomb yoke right now.
They literally have to hit a €200 price point max to offset their shipping.
They literally have to hit a €200 price point max to offset their shipping.
Ttrying to figure out how to engineer my current customized monstertech mount wor with my VP Rhino. I live close to the 80/20 LLC company so I can use them to cut and mill the extrusion for me. Is the Rhino base heavy enough if mounted to a square 80/20 base it will not move while being used?
TOr will I still need to utilize the desk clamp in order to keep the base from shifting?
Tmy Rhino just arrived!!!
J500 euros rrp
DHello 
, I don't know if I understood your question correctly, but here's my assembly on the MTS chassis. If it helps 
, I don't know if I understood your question correctly, but here's my assembly on the MTS chassis. If it helps D
