If you're modifying a route like you said above, you just click the little pencil button next to a r

If you're modifying a route like you said above, you just click the little pencil button next to a route, it opens up a panel on the right, and you can pick the mode

CChaika For cache? It's 512 MB max per object for free/pro/biz. > Does this mean I can c...

ra•9/25/24, 8:24 PM

Got it, so if I wanted to have better guarantees on cache duration I would need to use R2?

Rra Got it, so if I wanted to have better guarantees on cache duration I would need ...

ChaikaOP•9/25/24, 8:29 PM

Well R2 is an actual object storage so you'd go from no guarantees to guaranteed
It depends on your use case though. Each R2 Bucket exists in a single region. Unless your requests are all in one region, you'd need to make more then one or just accept the bad latency. You could ctx.waitUntil and not slow down the initial PUT but the GET would always be meh. Your other option would be KV, with object caching built in but a limit of 25 MB

CChaika Well R2 is an actual object storage so you'd go from no guarantees to guaranteed...

ra•9/25/24, 8:36 PM

Right, I forgot about KV. That seems promising. Is the 25MB limit for individual values or cumulative?

Walshy•9/25/24, 8:36 PM

each value

Corsix👾•9/25/24, 8:52 PM

anyone know what is missing or what it means if i have this messege? any tips where i should look?

 errorTypeError: The RPC receiver does not implement the method "textLableMatch".

 errorTypeError: The RPC receiver does not implement the method "textLableMatch".

CCorsix👾anyone know what is missing or what it means if i have this messege? any tips wh...

kian•9/25/24, 10:02 PM

Did you mean to put textLabelMatchtextLabelMatch (LableLable -> LabelLabel)?

dexter•9/26/24, 3:14 AM

no bun support for workers via git :NOOO:

dexter•9/26/24, 3:30 AM

so many bugs

Ddexter no bun support for workers via git :NOOO:

Elyo•9/26/24, 3:30 AM

If you are talking about Github Action you can add this step

# Step to install Bun using the official oven-sh GitHub Action
      - name: Setup Bun
        uses: oven-sh/setup-bun@v2
        with:
          bun-version: latest # You can use "latest" or a specific version

# Step to install Bun using the official oven-sh GitHub Action
      - name: Setup Bun
        uses: oven-sh/setup-bun@v2
        with:
          bun-version: latest # You can use "latest" or a specific version

EElyo If you are talking about Github Action you can add this step ```yaml # Step to i...

dexter•9/26/24, 3:30 AM

referring to this https://discord.com/channels/595317990191398933/1040420029080018945/1288694061372276797

Elyo•9/26/24, 3:31 AM

oh havent tried yet

Ddexter so many bugs 💀

Isaac McFadyen•9/26/24, 3:53 AM

To be fair, it's a newly released alpha product that hasn't even been officially announced yet :lul:

IIsaac McFadyen To be fair, it's a newly released alpha product that hasn't even been officially...

dexter•9/26/24, 3:54 AM

yeah that's fair lmao

CChaika If you're modifying a route like you said above, you just click the little penci...

Deliable•9/26/24, 4:15 AM

I don't see the Failure mode option tho

Bram Roets•9/26/24, 8:49 AM

Anyone has any luck deploy a worker pages using a GitHub Action?

I'm getting the following error "Missing entry-point: The entry-point should be specified via the command line". I've set pages_build_output_dirpages_build_output_dir and cannot set mainmain in wranger.toml

Advany•9/26/24, 9:27 AM

I have a worker that I want to deploy to multiple account. Is there a easy way of doing that? Currently when I login to a different account using wrangler and try to deploy, it fails...

AAdvany I have a worker that I want to deploy to multiple account. Is there a easy way o...

Advany•9/26/24, 9:30 AM

created a new toml with account id, that worked!

adeg•9/26/24, 10:42 AM

has anyone got the source map to work in the cf worker?

Cogent-Gyat•9/26/24, 11:47 AM

Hello i got question about WAF for my worker

tadhglewis•9/26/24, 1:34 PM

@Cogent-Sel it might seem more rude but if you actually want something answered, you're better off just asking your question directly.

https://dontasktoask.com/

Don't ask to ask, just ask

Cogent-Gyat•9/26/24, 1:36 PM

Woops. Sorry. So when i config my waf on the header. It ask me the content. I was wondering can the content be wildcard? Example c-php-* cause i feel like it need to be exact. @Lewis

Raymond Camden•9/26/24, 2:17 PM

hi folks, asking again - tldr - a worker can make a fetch() call to an API when i invoke the work via http. but on a schedule, it fails:

hey folks. i posted to workers-help, but haven't gotten well, help yet

so trying here. I've got a worker that uses a schedule. locally, it runs just fine. but in production, something weird happens. when it tries to use http to hit an API, it gets a 521 response. now here's the weird thing. i added a fetch() to the code so i could run my worker via the browser. the same network call there works, so its literally just failing when cloudflare executes it on a schedule. it's a bit messy now, but the code is here -https://github.com/cfjedimaster/cloudflareworkers-demos/blob/main/getincidents/src/index.js any ideas?

GitHub

cloudflareworkers-demos/getincidents/src/index.js at main · cfjedim...

Repository for CF Workers demos/examples/etc. Contribute to cfjedimaster/cloudflareworkers-demos development by creating an account on GitHub.

Flare•9/26/24, 2:18 PM

Please do not post your question in multiple channels/post it multiple times per the rules at ⁠#

welcome-and-rules. It creates confusion for people trying to help you and doesn't get your issue or question solved any faster.

Raymond Camden•9/26/24, 2:37 PM

i suppose that was for me. sorry. i had aksed my question 3 days ago so assumed enough time had gone by. ive asked on the forums. ive asked on the other channel and here and have been trying to get some support for weeks now. just frustrated.

tadhglewis•9/26/24, 3:13 PM

Given Workers now supports building within Cloudflare instead of your own CI pipelines, are there plans to support build caches similar to Pages? I haven't had a chance to speedtest it but Workers Builds seems to be much slower than using GitHub Actions and Pages as it's re-downloading every package each build

Ref: https://developers.cloudflare.com/pages/configuration/build-caching/#how-build-caching-works

D Trombett•9/26/24, 3:20 PM

Trying to understand the cf object of a request... here does the colocolo field refer to the Couldflare Server where the worker ran and citycity refers to the city where the request was made from?

Avi•9/26/24, 3:21 PM

anyone know if vite is support is being actively worked on for the new workers assets features announced today?

Kkian Did you mean to put `textLabelMatch` (`Lable` -> `Label`)?

Corsix👾•9/26/24, 4:39 PM

doing a service binding to worker B with function textLableMatch, and getting the error when doing a fetch to worker A that is calling that function from worker B

Corsix👾•9/26/24, 4:40 PM

is what im doing

Corsix👾•9/26/24, 4:41 PM

doing a ai worker on worker B to match text to lables as micro servie to worker A

CCorsix👾doing a service binding to worker B with function textLableMatch, and getting th...

ac•9/26/24, 4:55 PM

they were pointing out that you misspelled the word "label" and wondering if that is the issue.

ac•9/26/24, 4:56 PM

otherwise, I would make sure that you have a WorkerEntrypoint class that has that method on it.

dexter•9/26/24, 4:57 PM

does anyone know how to fix the error:

✘ [ERROR] Wrangler cannot validate that your Worker name matches what is expected by the build system. Please retry the build.

✘ [ERROR] Wrangler cannot validate that your Worker name matches what is expected by the build system. Please retry the build.

when deploying a worker via git? (Worker Builds)
the name is obviously the same in the dashboard and wrangler.toml

Keebs•9/26/24, 5:05 PM

any reason the AI get started demo

      const response = await env.AI.run("@cf/meta/llama-3.1-8b-instruct", {
        prompt: "What is the origin of the phrase Hello, World",
      });

      const response = await env.AI.run("@cf/meta/llama-3.1-8b-instruct", {
        prompt: "What is the origin of the phrase Hello, World",
      });

takes 15 seconds to respond from local dev?

Keebs•9/26/24, 5:06 PM

Response time: 25032 milliseconds

Keebs•9/26/24, 5:06 PM

25 seconds

adeg•9/26/24, 5:07 PM

has anyone got the source map to work in the cf worker? I couldn’t get it to work

Leon338•9/26/24, 5:37 PM

What's that speculation request I'm seeing in a simple Worker returning some html from kv? I feel like this is new and it adds one more Round Trip

Edit: And how do i disable it?

LLeon338 What's that speculation request I'm seeing in a simple Worker returning some htm...

texan•9/26/24, 5:46 PM

This is speedbrain (new blob post about it yesterday I think). It's turned on by default, but you can disable in your account by selecting a domain, then Speed > Optimization > Content Optimization > Disable Speed Brain

Ttexan This is speedbrain (new blob post about it yesterday I think). It's turned on by...

Leon338•9/26/24, 5:48 PM

Ah, okay, thank you! I have one more question. It seems like the initial load time of the Worker has slowed down as well. I don't remember it being around 120ms six months ago. I know it's not a huge difference, but it's just something I've noticed. It's an Worker to only test speeds and I tried it multiple times ofc. Btw the KV Part takes 5ms its also messured

LLeon338 Ah, okay, thank you! I have one more question. It seems like the initial load ti...

texan•9/26/24, 5:50 PM

I might be the wrong guy to ask about that

though you might benefit from smart placement if you're not already using that:
https://developers.cloudflare.com/workers/configuration/smart-placement/

Ttexan I might be the wrong guy to ask about that 😅 though you might benefit from sma...

Leon338•9/26/24, 5:52 PM

Ah, okay. No, that wouldn't help since I'm not calling any backend or external services outside of Cloudflare.

taczzy•9/26/24, 5:52 PM

I've been following along with the commits in the workers-sdk repo for the new experimental-assets. Played around with it a bit in a small repo. It is so close to providing the perfect developer experience for building sites on workers. The main feature I would love to see is support for running wrangler dev and having vite live reload the browser whenever I make changes to my HTML, CSS, JS that runs through the worker. You would get the best of both worlds, (quick update in the browser when you modify your code/you are actually running your app via the worker so its more true to how it will work in production).

You can get live-reload partially working with workers + assets, but really what I want, and I'm sure many others want is full integration with wrangler dev and vite to do real hot module reloading. It feels like this is possible with the new Environments API in the latest Vite beta but I havent dug in.

Is the team that is working on the new experimental assets thinking about any vite integration that would support HMR/live reload with workers? If not, what's the best way to pass along that use-case, open an issue on the workers-sdk repo?

taczzy•9/26/24, 5:53 PM

Also was sad to see the --remote flag will not work with the new expiremental assets feature. When I'm running wrangler dev, I like using the --remote flag so I can get access and interactive with my preview KV instance, was hoping to have the same ability when using experimental assets.

Mr. Technician•9/26/24, 6:00 PM

do I need to do anything special to enable compression on my websockets connection?

Mr. Technician•9/26/24, 6:00 PM

I'm sending some very large messages 500Kb+

Ohad•9/26/24, 6:24 PM

congrats on the new UI and all, but where did my cron triggers logs disappeared to?

Walshy•9/26/24, 6:25 PM

Settings -> Trigger Events -> View events

WWalshy Settings -> Trigger Events -> View events

Ohad•9/26/24, 6:25 PM

not trigger, view events

If you're modifying a route like you said above, you just click the little pencil button next to a r

Similar Threads