Now im working on a stable quick change solution for my Rhino so i can easilly swap it from center t

Now im working on a stable quick change solution for my Rhino so i can easilly swap it from center to side mount for when i have the urge to fly the 'bus or star citizen

Bbuzzbomb Now im working on a stable quick change solution for my Rhino so i can easilly s...

TonyM•10/2/24, 1:47 AM

This is what I use on my 4080 rig for the Rhino, the collective etc…

TonyM•10/2/24, 1:50 AM

The bottom permanently mounted on the rig. And the top part attached to the mount plate of the Rhino for example.

TonyM•10/2/24, 1:51 AM

AFAIK this also a company which sells such QR for sim/flight rigs. Maybe someone can chime in….

buzzbombOP•10/2/24, 1:52 AM

Thanks for the idea, but ill likely be fabricating my own solution.

buzzbombOP•10/2/24, 1:53 AM

but the QR sim guys stuff is intreaging

Bbuzzbomb but the QR sim guys stuff is intreaging

TonyM•10/2/24, 6:32 AM

I found it again:
https://qr4rigs.com
That might give you some inspiration for your own solution.

QR4rigs, Quick Release Mounts for Sim Rigs, Change your rig in seco...

QR4rigs, Quick Release Mounts for Sim Rigs : - Quick Release System Dust Covers & Support Plates Universal QR4rigs Systems Quick Release Base Mounts QR by Controller Type Designed for DOF Reality rigs QR by Controller Make Controller Accessories Custom Designs quick release, quick release mounts, sim rig, rig, mounts, controller mounts, joystic...

TTonyM I found it again: https://qr4rigs.com That might give you some inspiration for y...

Touch_Of_Legend•10/2/24, 9:13 AM

I might end up getting a mount from these guys but which one did you get and how did you mount it?

Seems a bit pricey for the full kit.. like $150?

So I’m not really sure I need a $150 mount but hey… those are the brakes sometimes.

Thanks

TTouch_Of_Legend I might end up getting a mount from these guys but which one did you get and how...

Ithergames•10/2/24, 10:55 AM

I have a lot of their stuff for my rig. My Rhino, side sticks, and throttles are on his release plates.

IIthergames I have a lot of their stuff for my rig. My Rhino, side sticks, and throttles are...

PlaguedRoo•10/2/24, 10:59 AM

Got any photos handy?

VPforceBot•10/2/24, 11:00 AM

:package:

RHINO #0714 Has Shipped!

VPforceBot•10/2/24, 11:00 AM

:package:

RHINO #0715 Has Shipped!

VVPforceBot :package: 🇸🇪 **RHINO #0715** Has Shipped!

Cynemi•10/2/24, 11:05 AM

I'm quite excited about this one!

VPforceBot•10/2/24, 12:05 PM

:package:

RHINO #0716 Has Shipped!

TTouch_Of_Legend I might end up getting a mount from these guys but which one did you get and how...

TonyM•10/2/24, 2:23 PM

No I went for the QRs from amazon that I posted above (red color). Attached to my 4080 rig from the bottom and the top detachable part attached to the Rhino mount plate or the collective.

TTonyM No I went for the QRs from amazon that I posted above (red color). Attached to m...

Touch_Of_Legend•10/2/24, 3:42 PM

Amazon? Got a link or what should I search? Thanks!

Duchess ✈•10/2/24, 3:53 PM

Same here, I have a lot of the QR stuff on my current rig.

Duchess ✈•10/2/24, 3:54 PM

My main rig has become solely F-16, so I will need one for everything else.

TTouch_Of_Legend Amazon? Got a link or what should I search? Thanks!

TonyM•10/2/24, 4:55 PM

https://www.amazon.com/Steering-Release-Adapter-Universal-Models/dp/B09SL9B8JL

Car Steering Wheel Quick Release Hub Adapter, Universal Snap Off Bo...

Car Steering Wheel Quick Release Hub Adapter, Universal Snap Off Boss Kit, 6 Hole Models

TonyM•10/2/24, 4:58 PM

Here on my rig for the Rhino and for the Virpil collective.

Duchess ✈•10/2/24, 5:08 PM

Interesting.

TonyM•10/2/24, 5:45 PM

and here the upper part of the QR on the Rhino for example

TonyM•10/2/24, 5:46 PM

It works best when you 3D print some adapter to fix the bolts.

Cowboy10uk•10/2/24, 6:28 PM

Has anyone tried the new force feedback for DCS Chinook yet. Just wondering if it’s working ok now.

Currently have it setup as force feedback via the software.

CCowboy10uk Has anyone tried the new force feedback for DCS Chinook yet. Just wondering if ...

Number481•10/2/24, 6:45 PM

seems like it works at a basic level.. but as far as I can tell, no sort of AFCS is implemented yet

NNumber481 seems like it works at a basic level.. but as far as I can tell, no sort of AFCS...

Cowboy10uk•10/2/24, 6:46 PM

Thanks, hopefully the AFCS will be implemented soon

HrEple•10/2/24, 6:58 PM

Regarding fastening screws on the gooseneck from virpil. Is it the external two screw on the gooseneck, or the two screws on top “inside” near the connector. I need to fasten “something”.

edit they were all loose - tightened all of them.

And context - my virpil grip is loose even when screwed on tight to the gooseneck.

buzzbombOP•10/2/24, 7:39 PM

need more context

buzzbombOP•10/2/24, 7:40 PM

the two screws at the top and bottom secure the respective aluminum threaded inserts to the extension. the two screws inside the top threaded connector secure electrical connector to the threaded insert. IF you are running a TM stick grip its reccomended to remove the two screws on the electrical connector so you can put an offset (twist) in the grip

buzzbombOP•10/2/24, 7:41 PM

it also reduces the chances of bending the pins on a TM grip as there is no centering/alignment feature on the extension

HrEple•10/2/24, 7:44 PM

Running a CM2 grip from virpil. I should perhaps losen the electrical connection screws if I want to run it offset? Or is that a feature in the grip perhaps - that the connector is already able to twist.

muddy.props_airbrushhero_•10/2/24, 8:15 PM

Hey guys, is there a list of which grips are working in which way (eg. all buttons or just a few) with the rhino? Im thinking about switching out my vkb Gunfighter and looking for a replacement, including an extension. I‘m especially interested if the new virpil flnkr would work with it.

HrEple•10/2/24, 8:34 PM

Pretty sure the flnkr grip will be supported. Asked the same question at some point and learned that walmis is getting one himself. Fingers crossed

DDuchess ✈I thought about that, and I possibly would, but getting this big direct drive wh...

Alkman•10/2/24, 8:59 PM

I build a Flight/Drive Rig like this. Everything stays in place when flying or driving except the Rhino. It is mounted with a Quick release system.

Alkman•10/2/24, 9:00 PM

Alkman•10/2/24, 9:00 PM

Alkman•10/2/24, 9:00 PM

Alkman•10/2/24, 9:01 PM

I just slide my seat forward for driving, after unplugging the Rhino.

Jon (Bounty_V)•10/2/24, 11:19 PM

That's a solid idea

FlyingDutchie320•10/3/24, 5:14 AM

Any idea how long between putting a order request in and receiving a invoice for a diy kit? Thanks

FFlyingDutchie320 Any idea how long between putting a order request in and receiving a invoice for...

DARRYL•10/3/24, 5:24 AM

Next business day or so, IIRC.

Fierce_Fire•10/3/24, 5:45 AM

Yeah, quick

SR-F_Winger_[73]_David•10/3/24, 11:09 AM

Hey Folks. Just a quick Note:
Guys i Made one Monster Rhino Kit (based on @TheAmazinGreat s Project) for a Guy. To save some shipping Cost i ordered parts for a second Kit wich is now ready to Ship.
For Info See Here https://forum.dcs.world/topic/357705-monster-ffb-rhino-diy-kit-supplyservice-supplementary-to-kaltokriwinger-kits/

If you're interested PM me for Fürther Details.

ED Forums

Monster FFB Rhino DIY kit supplyservice (Supplementary to Kaltokri/...

Hi Folks, Based on the awesome Work of @TheAmazingGreat (thanks for your permission to use your Work AS a Base) I made some slight changes and am offering a VPForce MONSTER Rhino Kit sourcing service. The "Thing" kit has the following Specs: - Gimbal printed from laser sintered PA12. - Grip-Conne...

Nemisis Wolf•10/3/24, 11:11 AM

So VP Rhino Ser No:708 got delivered an hour ago! SOOO excited! Now just to find out what to do next and mount it!

VPforceBot•10/3/24, 12:20 PM

:package:

RHINO #0718 Has Shipped!

VPforceBot•10/3/24, 12:20 PM

:package:

RHINO #0717 Has Shipped!

VPforceBot•10/3/24, 12:20 PM

:package:

RHINO #0719 Has Shipped!

ReapDaddy•10/3/24, 6:38 PM

So excited! Just got my email to order. Can’t wait

tanr•10/3/24, 8:45 PM

I'm liking the new G-Force effect! Much easier to keep pulling consistent Gs for tactical turns.

hectik•10/3/24, 10:27 PM

One of the options on the Order Request form for the base is the 'Machined Aluminum Grip Mount Upgrade'. Is the grip mount that comes with the base not aluminum? What's the difference? Just cosmetic?

HHrEple Regarding fastening screws on the gooseneck from virpil. Is it the external two ...

Hiob•10/3/24, 10:45 PM

If your goal was to build a machine that is MEANT to un-tighten screws, a Rhino would come very close to that. Well, it‘s main function is to vibrate like crazy.
Loctide! Loctide! Loctide!

Now im working on a stable quick change solution for my Rhino so i can easilly swap it from center t

Similar Threads

Similar Threads

Similar Threads