I see. I am using vue 2, not sure if it allows bindings?
I see. I am using vue 2, not sure if it allows bindings?
HNuxt should, iirc, but don't know about straight Vue
AI'm trying to login through cli using
npx wrangler login
. It opens a link in browser and asks for permission on the cloudfare page, then it opens a localhost page which doesn't load and says localhost refused to connect. CLI displays the error:
Error: ENOENT: no such file or directory, open 'C:\Users\hp\AppData\Roaming\xdg.config.wrangler\config\default.toml'
at writeFileSync (node:fs:2352:20)
at writeAuthConfigFile (D:\Atomic\newboard-server\newboard-db\node_modules\wrangler\wrangler-dist\cli.js:159075:37)
at Server.<anonymous> (D:\Atomic\newboard-server\newboard-db\node_modules\wrangler\wrangler-dist\cli.js:159169:13)
at process.processTicksAndRejections (node:internal/process/task_queues:95:5) {
errno: -4058,
code: 'ENOENT',
syscall: 'open',
path: 'C:\Users\hp\AppData\Roaming\xdg.config.wrangler\config\default.toml'
}
I then manually created default.toml in the mentioned path. I tried to login after this, then the issue was:
Error: EBADF: bad file descriptor, write
at writeFileSync (node:fs:2352:20)
at writeAuthConfigFile (C:\Users\hp\AppData\Roaming\npm\node_modules\wrangler\wrangler-dist\cli.js:159075:37)
at Server.<anonymous> (C:\Users\hp\AppData\Roaming\npm\node_modules\wrangler\wrangler-dist\cli.js:159169:13)
at process.processTicksAndRejections (node:internal/process/task_queues:95:5) {
errno: -4083,
code: 'EBADF',
syscall: 'write'
}
npx wrangler login
. It opens a link in browser and asks for permission on the cloudfare page, then it opens a localhost page which doesn't load and says localhost refused to connect. CLI displays the error:
Error: ENOENT: no such file or directory, open 'C:\Users\hp\AppData\Roaming\xdg.config.wrangler\config\default.toml'
at writeFileSync (node:fs:2352:20)
at writeAuthConfigFile (D:\Atomic\newboard-server\newboard-db\node_modules\wrangler\wrangler-dist\cli.js:159075:37)
at Server.<anonymous> (D:\Atomic\newboard-server\newboard-db\node_modules\wrangler\wrangler-dist\cli.js:159169:13)
at process.processTicksAndRejections (node:internal/process/task_queues:95:5) {
errno: -4058,
code: 'ENOENT',
syscall: 'open',
path: 'C:\Users\hp\AppData\Roaming\xdg.config.wrangler\config\default.toml'
}
I then manually created default.toml in the mentioned path. I tried to login after this, then the issue was:
Error: EBADF: bad file descriptor, write
at writeFileSync (node:fs:2352:20)
at writeAuthConfigFile (C:\Users\hp\AppData\Roaming\npm\node_modules\wrangler\wrangler-dist\cli.js:159075:37)
at Server.<anonymous> (C:\Users\hp\AppData\Roaming\npm\node_modules\wrangler\wrangler-dist\cli.js:159169:13)
at process.processTicksAndRejections (node:internal/process/task_queues:95:5) {
errno: -4083,
code: 'EBADF',
syscall: 'write'
}
Khi all. I have a nextjs project that im currently deploying to pages without problem using github integration. Im currently trying to add wrangler to that repo so that I can develop with D1 locally. So i run
and get the toml file but when I run
I just get the no functions shimming error and a 404 page. What else do i need to do?
npx wrangler pages download configand get the toml file but when I run
npx wrangler pages devI just get the no functions shimming error and a 404 page. What else do i need to do?
KOk i managed to find the next on pages documentation: https://developers.cloudflare.com/pages/framework-guides/nextjs/ssr/get-started/ but unfortunately next-on-pages seems to have some problem on windows machine. I guess I need to do blind D1 write development for now before my mac arrives lmao
Cloudflare Docs
Deploy a full-stack Next.js app to Cloudflare Pages
VHere's the recording of today's Wrangler Office Hours:bibicat:
Tprobably asked here or before, why remove wrangler init ? its so easy to remember and is useful vs manually searching for npx create (framework)
Ait is possible to test cloudflare rules in local development environment with wrangler? If not then what is the recommended approach to test a pages application in local development environment which has many rules configured in production setup?
C
FPlease do not post your question in multiple channels/post it multiple times per the rules at #
welcome-and-rules. It creates confusion for people trying to help you and doesn't get your issue or question solved any faster.
welcome-and-rules. It creates confusion for people trying to help you and doesn't get your issue or question solved any faster.
THi there, is it possible to use wrangler (and wrangler.toml) to manage and deploy 2 pages projects from a single app root ?
I have an App bundled by sveltekit and the design system of this app (tied to the same src) bundle by an other tool.
My idea was to have a page project for each build but I don't find the way to write this in the toml and wrangler doesn't have option to select the toml used.
I have an App bundled by sveltekit and the design system of this app (tied to the same src) bundle by an other tool.
My idea was to have a page project for each build but I don't find the way to write this in the toml and wrangler doesn't have option to select the toml used.
JHello, i'm having a really annoying bug. i have deployed via wrangler and my website is working but i'm not sure why it is showing data from my development instead of the production env variables. do you see anything wrong in my wrangler file?
inside my sveltekit app im accesing "PUBLIC_ORIGIN" env variable and it is giving me the localhost one, i also have a .env file locally should i remove it? not sure how to fix it
*if i remove my .env file, when running the following command:
then it gives me an error on sveltekit build, what is the correct command to deploy then? using env variables from wrangler config file
inside my sveltekit app im accesing "PUBLIC_ORIGIN" env variable and it is giving me the localhost one, i also have a .env file locally should i remove it? not sure how to fix it
*if i remove my .env file, when running the following command:
then it gives me an error on sveltekit build, what is the correct command to deploy then? using env variables from wrangler config file
�Hello, There's no any startup-time output in cli, when running wrangler deploy
KIt all depends on the id of the namespace you are binding to.
�I mean the docs say that start-up time will be estimated in CLI wrangler output, when deploying
But what i see is only a bundled size, even an independent worker
But what i see is only a bundled size, even an independent worker
PHi, is it possible to launch a dev server with both hot reload from vite and env injected by wrangler dev? I have been trying with solidstart template but found that these two are split into
devpreview
HYour framework can give you access to bindings in dev via
getPlatformProxy
Pohh great thank you!
HThough at a quick glance, it doesn't look like Solid has this yet
PYeah guess that is why I missed this. Looks like there is manual workaround https://github.com/solidjs/solid-start/issues/1394
GitHub
Duplicates I have searched the existing issues Latest version I have tested the latest version Summary 
Solid-start's dev server doesn't use wrangler or miniflare for the Cloudflare preset...
Solid-start's dev server doesn't use wrangler or miniflare for the Cloudflare preset...
AI'm on
3.80.4wrangler typesIt happens to me with the example project (
npm create cloudflare@latest my-astro-app -- --framework=astro --experimental
JWhat OS are you using?
AmacOS Sonoma
DDo we know if theres a size limit for json file in the bulk kv put command?
DFor a single file, the size limit is always 25 MB. For the combined limit, I believe it is 100MB total.
Dso the limit is 10k key value pairs or 25mb?
Doh each pair is at max 25mb, and the overall request can't be above 100mb
Whave you added anything to your astro project (was it the starter files or blog?) - i'm unable to reproduce with either, but we're seeing this error a bit and would like to get to the bottom of it womp :(
AI don't think it was the blog one, but the other one that they recommend with some starter files. I didn't change anything
WAh yep it’s broken - thanks for the report, I’ll go have a look 
ADoes anyone have best practices for handling wrangler.toml files in a monorepo? We have them all over, and with apps/packages/workers all needing them to some extent, it can get pretty confusing to make sure we have the right bindings in the right places without massive duplication everywhere.
�AiError
KHey folks, I had a pretty rough dev experience with using durable objects, and it would be nice to get some guidance on best practices.
In a dev branch, i set up my Toml file to have a durable object binding without an env (as per docs), but it looked like when i ran wrangler dev —remote, it created a durable object in prod.
That caused a lot of problems, and a separate branch that wasn’t related was unable to deploy bc it didn’t have the migration to delete the durable object.
Also, it looked like deploying to remote dev would update the durable object in prod.
As an example, I don’t really have a good idea of the dev lifecycle. Like if I create a DO for the first time, what should my toml file look like to test & deploy? And after several iterations, what would it look like (e.g. do I need to delete migrations after every deploy?)
In a dev branch, i set up my Toml file to have a durable object binding without an env (as per docs), but it looked like when i ran wrangler dev —remote, it created a durable object in prod.
That caused a lot of problems, and a separate branch that wasn’t related was unable to deploy bc it didn’t have the migration to delete the durable object.
Also, it looked like deploying to remote dev would update the durable object in prod.
As an example, I don’t really have a good idea of the dev lifecycle. Like if I create a DO for the first time, what should my toml file look like to test & deploy? And after several iterations, what would it look like (e.g. do I need to delete migrations after every deploy?)
HMigrations are only for if you create a new class, rename a class, or delete a class. They don't need to be added for each deploy
Kthanks for responding.
is it expected that doing dev —remote would deploy a production asset?
My unrelated branch was failing to deploy because the toml file didn’t have a reference to a durable object that was only defined in a test branch. I can’t remember the exact error, but I had to add a migration in my unrelated branch to delete the existing durable object and then in a follow up, I needed to remove the migration because now there was no durable object to delete.
It was a headache because I didn’t even deploy the durable object intentionally
is it expected that doing dev —remote would deploy a production asset?
My unrelated branch was failing to deploy because the toml file didn’t have a reference to a durable object that was only defined in a test branch. I can’t remember the exact error, but I had to add a migration in my unrelated branch to delete the existing durable object and then in a follow up, I needed to remove the migration because now there was no durable object to delete.
It was a headache because I didn’t even deploy the durable object intentionally
HMaybe? I don't know the particulars for DOs specifically, but
--remoteI would go local, if possible, to minimize issues like that
Kok, in general, do you know if you have to clean up the migrations in the toml files?
Even if i developed locally, it seems like there’s a step where you need to remove migrations after classes are deleted etc, and that seems annoying if you have version control and work with multiple people
Even if i developed locally, it seems like there’s a step where you need to remove migrations after classes are deleted etc, and that seems annoying if you have version control and work with multiple people
CHow to solve this issue, when using a custom port with HTTPS
known issue with fetch() requests to custom HTTPS ports in published Workers: the custom port will be ignored when the Worker is published using the "wrangler deploy" command.NAnyone knows how to login to wrangler in project IDX?
XHas been stuck on
Waiting for DNS to propagate (36s) ... for like 15 min now, even though I can access the deployment already. Any idea what could the cause be?XWelp, I ctrl + c it, changed some stuff and run
npm run deploy - now it worked fine ¯\_(ツ)_/¯
Hhello, can i load the code deployed from the worker dashboard in wrangler?
Rhttps://github.com/cloudflare/workers-sdk/pull/7031/#issuecomment-2432587096
how do I build something like this on my local?
how do I build something like this on my local?
JI’d start in the contributing guide: https://github.com/cloudflare/workers-sdk/blob/main/CONTRIBUTING.md