![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Z-Tilt issues (most likely awd causing this)
Ok so I finally got around to building my 3.1 (enclosed 400x400)
I have a beacon probe and an AWD kit.
After almost ripping out every hair on my head I finally got the AWD part and everything else working.
But now im stuck on z-tilt and cant find anything on here or online.
Issue:
Z-Tilt crashes into the wall and also moves at super duper speeds. I found a post from @Helge Keck where they stated that switching x and y steppers will cause z-tilt to misbehave. Does anyone have an idea on how to fix this. I really dont want to get rid of my awd kit
Also sorry for posting printer.cfg as a txt file. Still learning to navigate MacOS. Also ignore all my comments in the cfg, even I dont understand them..
Edit1 after comments: Ok i figured out I can edit this so I dont have to comment and bump it up. I found out something interesting.
I noticed I have to reverse only one Z stepper wich makes no sense but it actually does. It is run by a 2209. Could my 5160s cause issues with Z tilt due to all steppers being reversed?
I have a beacon probe and an AWD kit.
After almost ripping out every hair on my head I finally got the AWD part and everything else working.
But now im stuck on z-tilt and cant find anything on here or online.
Issue:
Z-Tilt crashes into the wall and also moves at super duper speeds. I found a post from @Helge Keck where they stated that switching x and y steppers will cause z-tilt to misbehave. Does anyone have an idea on how to fix this. I really dont want to get rid of my awd kit
Also sorry for posting printer.cfg as a txt file. Still learning to navigate MacOS. Also ignore all my comments in the cfg, even I dont understand them..
Edit1 after comments: Ok i figured out I can edit this so I dont have to comment and bump it up. I found out something interesting.
I noticed I have to reverse only one Z stepper wich makes no sense but it actually does. It is run by a 2209. Could my 5160s cause issues with Z tilt due to all steppers being reversed?
printer.cfg.txt18.21KB
Solution
lowered acceleration and z tilt speed and now it seems to work fine, just a little off so i need to figure that out (too far to the left on bed meshing and too far to the right on z tilt
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=44){kind=icon}
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}