But now with Titles changed in all my H145 liveries...then no more HANDS ON... => do you understand
But now with Titles changed in all my H145 liveries...then no more HANDS ON... => do you understand anything?
D(problem solved with this little trick i can say)
NI guess I don't understand anything?
When the helicopter tablet is set up properly, "Hands ON" gets triggered by TelemFFB when the joystick exceeds the configured hands-on deadzone range. Conversely, "Hands Off" gets triggered once the stick is back inside the configured hands-off deadzone setting range.
That is the only setting which affects when and why Hands on/off gets triggered.
I am not at home currently so I can't test anything, but if you send me your userconfig.xml I can look at it in a couple of days when I get back.
When the helicopter tablet is set up properly, "Hands ON" gets triggered by TelemFFB when the joystick exceeds the configured hands-on deadzone range. Conversely, "Hands Off" gets triggered once the stick is back inside the configured hands-off deadzone setting range.
That is the only setting which affects when and why Hands on/off gets triggered.
I am not at home currently so I can't test anything, but if you send me your userconfig.xml I can look at it in a couple of days when I get back.
Rhey guys I haven't played in a while and just went to use the VP force base however it is not picking up the winwing adapter
DYes, of course, I can send you this.
I know the whole thing “well enough” to have been able to manage the last few months well and as soon as the update (FW 1.0.17) and the new TelemFFB, my basic liveries (title = Airbus H145 XY) are doing HANDS ON.
Whereas in the game, there's no input at all. I thought I was going crazy!
Maybe you'll find something invisible
Anyway, thanks for your precious help. I can finally fly again with my few cool liveries!
I know the whole thing “well enough” to have been able to manage the last few months well and as soon as the update (FW 1.0.17) and the new TelemFFB, my basic liveries (title = Airbus H145 XY) are doing HANDS ON.
Whereas in the game, there's no input at all. I thought I was going crazy!
Maybe you'll find something invisible
Anyway, thanks for your precious help. I can finally fly again with my few cool liveries!
Rok I got it to recognize the adaptor but now it wont recognize the stick the WW F18 stick attached. even when I click the buttons to enable them they still aren't recognized. @walmis
MHey guys, is sombody also experiencing a bug with the force trim in the AH 64 D Apache in DCS? After releasing the trim up (force trim unlock) button the stick always returns to center. I checked my special option trim settings and it’s the right one. I even cycled it through. It appeared after I updated everything (DCS, Telemffb, Configurator) yesterday and now I don’t know if its DCS’s fault or some settings. For a Workaround I activated hardware force trim in the configuration software but that feels not as precise when flying.
HDid you check the bindings for trim release?
MYeah, they also are as usual
HAny curves or saturation changes on the cyclic inside DCS?
KI heard the exact same problem from someone else. That was the reason why I'll not update to new firmware, Configurator and Telem until these issues are found and fixed.
RThanks. Is it possible to roll back to an earlier fw?
RI recently had the same issue. Letting the trim release button go then the stick goes back to center instead of staying where it is, isn't it? Mine got fixed by changing the USB port from a hub to diretly into the motherboard, as Walmis guided me to. I have too many USB devices. It might worth trying if your situation is the same.
W@R7-Cedar @RimanDk Pushed a firmware update with some USB code updates, try it and report if it has resolved the issues
RThank you
IInstalling a limiter adapter: Question, How do you tune the axis to compensate for the adapter? do you need to do this or just a recalibration of the joystick is enough? (DCS)
His anyone getting an idle oscillation (slight one that doesn't get out of control) since latest firmware and calibration software update
BI updated the Rhino Firmware to v1.0.17b4 and now when I open VPforce Configurator I get this message. When I click OK the app closes. What did I do wrong?
RThank you Walmis, I'm trying it now. First I tried to move the joystick bask to the hub to see if the problem comes back, so far the the Fedit and DCS is working as normal (Strangely, and kinda expected, the "DCS generated FFB getting inhibited issue" is not coming back). But the other issue I reported earlier comes back when I tried to plug both the Joystick and the Pedal (Mutual exclusion issue for USB connecting Joystick and Pedal). I'm about to update the firmware to Latest Firmware: v1.0.17b4 and see how it goes.
RThe firmware v1.0.17b4 appear to have addressed "Mutual exclusion issue for USB connecting Joystick and Pedal" issue, I'm flying both the Joystick and Pedal connected via Sabrent USB hub now. Thank you again Walmis, flying with VP-FORCE Feedback is such a joy!
HYou just need to do a new calibration in VP config. That‘s all.
KCan someone point me towards explanation what exactly this "Spring Dynamics" setting is doing? I'm mainly flying F-4 in DCS and can't tell the difference between it on and off. I get the description but there is no explanation in manual, I'm not sure if this is working or not.
Shello, after update the rhino Firmware and the Configurator to the lastest version my rhino stopped registering the button in the app and ion the game controllers windows app. any ideias? the axis are ok.
SI can't have button actuation in the Rhino FFB WebUSB Tool too.
Sps: i'm using the A10 warthog stick and was working before.
Sok got it, just changed to generic grip
NMaps the input spring gain (from game) to a desired output spring gain. With a linear 1.0 to 1.0 line, the output will always equal the input.
TI did, but was able to tune it out with some changes to friction/inertia. I would recommend loading the Rhino defaults with the new firmware/app and then seeing if the oscillation goes away. Then tweak back to your original settings one at a time and see what induces the instability.
IThanks
WIt's fine. Just download the latest configurator package .zip 
MTodays firmware update did the trick for me too. Apache trims as usual. Thanks Walmis!
HThanks mate! Yeah I was thinking the same with reintroducing one at a time from default. Nice to hear you got a fix too. I was hoping I wasn't the only one!
Ohmm mine also stopped showing up in DCS/game controllers
Ono dice just yet on getting it back
telemetry is fine in configurator
telemetry is fine in configurator
Orestarted, now motor x/y n/d and config seems to be wiped
Ogiving it a rest for now as I seem to be going backwards
Oon win 10 if that matters
Ohmm, it is showing up in the system tray under "safely remove hardware and eject media"
O
Ostill can't get it to show in game controllers. actually going to bed this time. any help much appreciated! thanks all.
THi. I'm getting this message when I try to set a config for an aircraft. I can only set the Joystick, when I click on Pedals or Collective it won't let me set a config with this message.
NOpen the individual instance windows and do it from there. I’m not sure setting the profile overrides across instances (or things like button bindings) will work from the offline editor.
NThe offline editor is in need of an overhaul.
TI'm going to order some more throw limiters but I'm a bit confused as to the degree's of movement. I first ordered the 11 degree default but felt like I needed more throw so I ordered the 20 degree and now I have to much throw. When I order my next set I want to order less throw on the nose up pitch and a little more for the nose down pitch. Was the 20 degree that ordered both ways - and + 20 X and Y or was that just 20 total? like +10 -10 on the X and Y? I need to know this so when I place the order for the next set I don't mess up and get totally the wrong size.
TUntil the last update I've always done it like this. What do you mean "Individual Instance"? It seems not to matter what I click, Joystick remains as the Master Instance. Have tried with DCS running still won't work.
FWhat I do is I play with the end stops settings until I find the throw I want. Then I apply those percentages to the 22 degrees of throw and that's the limiter I order.
FThe 20 degrees that you ordered is 20 forwards and 20 backwards (+-) so 40 degrees in total.
Tso does this make sense that I order this more more push less pull and a little less roll throw I would like to order some more throw limiters. I would like to order 3.
- X +/- 15 and Y -11 +20
- X +/- 16 and Y -11 + 20
- X +/-17 and Y -11 + 20
TI used the 11 on bottom and 20 on top and liked it for pitch but I want a little less roll so I ordered 3 throw limiters
FThose make sense and you mean less roll not yaw.
FAnd more push or more pull those are reversible so you can flip them over to experiment if needed.
