what was the issue

S

segfaultdev.elf•11/15/24, 1:00 PM

ZZacckOsiemo what was the issue

S

segfaultdev.elf•11/15/24, 1:00 PM

I was using an old breadboard of mine which was covered by dust

S

segfaultdev.elf•11/15/24, 1:00 PM

and the result you know already

S

segfaultdev.elf•11/15/24, 1:02 PM

Then I took my multimeter and checked the voltage of VCC and GND

Ssegfaultdev.elf the issue was my breadboard XD

M

melta101•11/15/24, 1:10 PM

Mmelta101 😂

Z

ZacckOsiemoOP•11/15/24, 2:03 PM

everytime hey! I got stuck on a stream for 40 mins because of a breadboard

ZZacckOsiemo everytime hey! I got stuck on a stream for 40 mins because of a breadboard

M

melta101•11/15/24, 2:05 PM

Few reasons why I keep put a analyser in between now a days

Mmelta101 Few reasons why I keep put a analyser in between now a days

Z

ZacckOsiemoOP•11/15/24, 2:06 PM

this is the way.

ZZacckOsiemo everytime hey! I got stuck on a stream for 40 mins because of a breadboard

S

segfaultdev.elf•11/15/24, 2:48 PM

So many things happens
I was using a STM31F411 since the First day of learning STM32 but today after creating project I saw it doesn't have any CAN Peripheral
then I soldered another Dev Board known As BluePIll
Then my breadboard started playing with me after fixing it my receiver end weren't jumping into ISR
but now everything is working perfectly

S

segfaultdev.elf•11/15/24, 2:49 PM

It was a long day

S

segfaultdev.elf•11/15/24, 2:50 PM

finally I am ready to take a break

T

techielew•11/15/24, 2:56 PM

Hey @Event Pings,
This week's Office Hours on "How Do You Secure Your Embedded Firmware" is starting in about 5 minutes. Follow this link to join:

DevHeads IoT Integration Server

Office Hours: How Do You Secure Your Embedded Firmware | DevHeads I...

Join DevHeads meetups to connect with other DevHeads and riff on a variety of topics for 30-60 minutes. Join here: https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1/live#/....

Ssegfaultdev.elf also I will program another stm on the other end so that I can verify everything...

K

ke7c2mi•11/15/24, 3:25 PM

Good shout, CAN will show an error when messages are not acknowledged, in default configurations that will cause the message to be sent repeatedly forever

TL;DR A CAN message must be received by at least one node or it is an error

Kke7c2mi Good shout, CAN will show an error when messages are not acknowledged, in defaul...

S

segfaultdev.elf•11/15/24, 3:29 PM

I was checking then but it was mainly breadboard issue

S

segfaultdev.elf•11/15/24, 3:29 PM

now everything is fixed

K

ke7c2mi•11/15/24, 3:31 PM

I spent many hours of my life fighting CAN, it can be quite spicy

M

Marvin•11/15/24, 3:43 PM

Good luck hiding UART

MMarvin Good luck hiding UART

M

melta101•11/15/24, 4:00 PM

Firmware extraction or shell access?

ZZacckOsiemo can you please find out how many computers are used here, like gpos plus rtos sy...

A

aymen ammari•11/15/24, 4:13 PM

Just like @melta101 said they all work with PLC except for the camera ones they are connected to an actual pc with their software to control it with from basic functions to more complicated ones

Mmelta101 Firmware extraction or shell access?

M

Marvin•11/15/24, 4:15 PM

can be both. shell access can lead to the other.

MMarvin can be both. shell access can lead to the other.

M

melta101•11/15/24, 4:29 PM

Yep
I have done this to an old router

M

Marvin•11/15/24, 4:46 PM

Bet that was fun.

R

Rodrigo•11/15/24, 10:26 PM

Hii, everyone

Kke7c2mi I spent many hours of my life fighting CAN, it can be quite spicy

S

segfaultdev.elf•11/16/24, 2:56 AM

same here

S

segfaultdev.elf•11/16/24, 2:57 AM

and Then Finally Peace

S

segfaultdev.elf•11/16/24, 2:57 AM

It took me almost a day

K

ke7c2mi•11/16/24, 12:37 PM

Yeah once it works it's very solid.

Twitches thinking of adjusting sample point

S

segfaultdev.elf•11/16/24, 6:44 PM

have anyone proted FreeRTOS for STM32F446RE I am getting so many MPU realted error

S

segfaultdev.elf•11/16/24, 6:46 PM

/usr/lib/gcc/arm-none-eabi/14.1.0/../../../../arm-none-eabi/bin/ld: CMakeFiles/freertos.dir/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c.o: in function `vSVCHandler_C':
/home/asraful/Code/STM32/STM32F446xx/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c:508:(privileged_functions+0x93c): undefined reference to `__syscalls_flash_start__'
/usr/lib/gcc/arm-none-eabi/14.1.0/../../../../arm-none-eabi/bin/ld: /home/asraful/Code/STM32/STM32F446xx/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c:508:(privileged_functions+0x940): undefined reference to `__syscalls_flash_end__'

/usr/lib/gcc/arm-none-eabi/14.1.0/../../../../arm-none-eabi/bin/ld: CMakeFiles/freertos.dir/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c.o: in function `vSVCHandler_C':
/home/asraful/Code/STM32/STM32F446xx/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c:508:(privileged_functions+0x93c): undefined reference to `__syscalls_flash_start__'
/usr/lib/gcc/arm-none-eabi/14.1.0/../../../../arm-none-eabi/bin/ld: /home/asraful/Code/STM32/STM32F446xx/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c:508:(privileged_functions+0x940): undefined reference to `__syscalls_flash_end__'

/usr/lib/gcc/arm-none-eabi/14.1.0/../../../../arm-none-eabi/bin/ld: CMakeFiles/freertos.dir/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c.o: in function `vSVCHandler_C':
/home/asraful/Code/STM32/STM32F446xx/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c:508:(privileged_functions+0x93c): undefined reference to `__syscalls_flash_start__'
/usr/lib/gcc/arm-none-eabi/14.1.0/../../../../arm-none-eabi/bin/ld: /home/asraful/Code/STM32/STM32F446xx/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c:508:(privileged_functions+0x940): undefined reference to `__syscalls_flash_end__'

/usr/lib/gcc/arm-none-eabi/14.1.0/../../../../arm-none-eabi/bin/ld: CMakeFiles/freertos.dir/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c.o: in function `vSVCHandler_C':
/home/asraful/Code/STM32/STM32F446xx/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c:508:(privileged_functions+0x93c): undefined reference to `__syscalls_flash_start__'
/usr/lib/gcc/arm-none-eabi/14.1.0/../../../../arm-none-eabi/bin/ld: /home/asraful/Code/STM32/STM32F446xx/FreeRTOS/portable/GCC/ARM_CM4_MPU/port.c:508:(privileged_functions+0x940): undefined reference to `__syscalls_flash_end__'

S

segfaultdev.elf•11/16/24, 6:47 PM

I think I have to implement so many things manually

S

segfaultdev.elf•11/16/24, 6:57 PM

where should i put this section?

S

segfaultdev.elf•11/16/24, 6:57 PM

other than everything fixed

Ssegfaultdev.elf ```c /usr/lib/gcc/arm-none-eabi/14.1.0/../../../../arm-none-eabi/bin/ld: CMakeFi...

U

Umesh Lokhande•11/16/24, 7:01 PM

It seems like you used ARM_CM4_MPU architecture from GCC folder of FreeRTOS source files. To make it work with STM32F4 you must use ARM_CM4F folder and its associated

port.c

port.c

and

portmacro.h

portmacro.h

Once you fix this then just make sure FreeRTOSConfig.h configured properly and then project will compile fine. Let me know if issue persists even after making changes

UUmesh Lokhande It seems like you used *ARM_CM4_MPU* architecture from *GCC* folder of FreeRTOS ...

S

segfaultdev.elf•11/16/24, 7:07 PM

my MCU has MPU so I am trying to use one with the mpu

Ssegfaultdev.elf my MCU has MPU so I am trying to use one with the mpu

U

Umesh Lokhande•11/16/24, 7:17 PM

Here's a similar question with the discussion which already answered question https://freertos.org/FreeRTOS_Support_Forum_Archive/August_2017/freertos_Setting_compiler_path_to_ARM_CM4_MPU_showing_error_300b24d2j.html Hope you find it useful.

UUmesh Lokhande Here's a similar question with the discussion which already answered question <h...

S

segfaultdev.elf•11/16/24, 7:23 PM

Sorry but I am not seeing any answer I am only seeing post about the porblems

UUmesh Lokhande Here's a similar question with the discussion which already answered question <h...

S

segfaultdev.elf•11/16/24, 7:24 PM

T

tilleli.•11/16/24, 8:39 PM

Hello anyy helpp

Ttilleli.Hello anyy helpp

T

techielew•11/16/24, 9:01 PM

Help with what?

UUmesh Lokhande Here's a similar question with the discussion which already answered question <h...

S

segfaultdev.elf•11/16/24, 9:21 PM

also do you also avoid using MPU? I mean I can port without MPU easily. But porting MPU one giving me nightmare

Ssegfaultdev.elf also do you also avoid using MPU? I mean I can port without MPU easily. But port...

U

Umesh Lokhande•11/17/24, 3:38 AM

So far I didn't need so haven't tried ARM_CM4_MPU since STM32F446RE uses Cortex-M4 core with Floating point (ARM_CM4F). I keep things simple & avoid exploring features that I don't need for immediate future projects

UUmesh Lokhande So far I didn't need so haven't tried *ARM_CM4_MPU* since STM32F446RE uses *Cort...

S

segfaultdev.elf•11/17/24, 3:38 AM

I see

UUmesh Lokhande So far I didn't need so haven't tried *ARM_CM4_MPU* since STM32F446RE uses *Cort...

S

segfaultdev.elf•11/17/24, 9:12 AM

without mpu my one is working just fine

A

Accur4te•11/17/24, 2:29 PM

hey guys a newbie question - does esp32 c3 support wifi HALOW , if yes how can we access it . IF not what are other alternative development environment we can use to work with wifi halow .

T

techielew•11/17/24, 3:04 PM

@Event Pings apologies, we inadvertently duplicated the FreeRTOS utilities event, which already aired two weeks ago. If you are interested in viewing it you can watch it here: https://www.youtube.com/live/ziqU8c1yhWM?si=ubGCumyqNh31Gq46

YouTubeDevHeads

Task Utilities and Interrupt Handling with FreeRTOS (DevHeads' Engi...

Join this DevHeads Engineering Hour REHEAT where IoT expert Umesh Lokhande dives into task utilities, task starvation prevention, and interrupt handling in F...

Ttechielew @Event Pings apologies, we inadvertently duplicated the FreeRTOS utilities event...

T

techielew•11/17/24, 3:04 PM

Also feel free to reach out to @Umesh Lokhande with any questions here in the chat.

H

Heart•11/18/24, 5:49 AM

Hi

HHeart Hi

T

techielew•11/18/24, 5:57 AM

Welcome, Heart. What brings you to DevHeads? What are you working on?

AAccur4te hey guys a newbie question - does esp32 c3 support wifi HALOW , if yes how can w...

U

Umesh Lokhande•11/18/24, 9:35 AM

I don't think esp32 modules support's wifi HaLow but you can check FGH100M module from Quectel https://www.mouser.in/new/quectel/quectel-fgh100m-modules

AAccur4te hey guys a newbie question - does esp32 c3 support wifi HALOW , if yes how can w...

Z

ZacckOsiemoOP•11/18/24, 10:34 AM

wifi
halow is very new and you need some special equipment

Similar Threads

Similar Threads

Similar Threads