yes I did, but it still jittered around when centered
yes I did, but it still jittered around when centered
FI've never experienced any jittering when in the hornet using the autopilot. I wonder if any of the filter settings may be causing that. A screenshot do the whole configuration page help to see if anyone notices an unusual value there. And maybe a video of the jittering showing the stick movement and also the config page as it happens.
RRYou can very slightly see the in game stick shaking
R
RYou can’t hear the deedle deedle because of my headphones
FIn the settings page you want to expand all the options on the right too.
R
FIn the video I can't see any jittering on the stick. However... Can you hit control + enter to see the controls in the lower left of the screen? Basically I want to see if in DCS the stick is actually centered.
FAnd it will show any jittering there more clearly too
R
FThat should not disengage the auto pilot. I'll try to see if I can somehow recreate that warning light when trying to activate the AP.
RI get the warrning when trying to engage it to begin with, can't even get it engaged unless I add that deadzone. Will be happy if we can do this without a DZ. 
FOk so then the jittering is the culprit for sure. Just for the fun of it... Does it happen if you put the potentiometer to 100%? Full spring force. No deadzone.
RYes
RIf it makes a difference, using RealSimulator Hornet grip with paddle extension
R
RGrip connected to system via Bluetooth
FI read somewhere here of someone having oscillations with friction enabled. Can you disable friction, damper and inertia. And if disabling them fixes it can you enable them one by one to see if any of them causes the jitter?
RStandby
FI only have damper enabled. No friction nor inertia.
RDisabling did not fix
RAlso disabled on global effects section
RMight be the periodic effects slider. I’ve got it down to 30 and it works. Hmmm
FThen some effect on telemffb may be causing the rumble and interfering with the AP. If I remember correctly I disabled the rpm effect on it or something like that.
FSince you are testing with the power at full military that effect would cause some significant periodic effect.
FI have my periodic effects set to 50% without issues.
RJet rumble is at 12 in TelemFFB
R45hz
ROk jet rumble is it. Disabling it made AP work. Now to see how far I need to turn it down
FYes I disabled it because I didn't like it.
FSince I have a buttkicker under my seat that gives me the rumble I need.
ROk 8 worked but was touchy. I turned it to 6 and it seems more reliable.
I don’t have a Buttkicker. Used to have a jetseat but it broke, plus was uncomfortable
I don’t have a Buttkicker. Used to have a jetseat but it broke, plus was uncomfortable
RTime to hit the sack. Thanks for all the help. I’ll start relearning the Hornet tomorrow. 
FThanks @Number481 for responding, however for me, MSFS is enabled in TelemFFB but the Rhino is not visible as a control device in the Sim's settings.
CHi,
I don't have any spring effect at all anymore, can not get it back!!!
I did a factory reset by importing the Rhino defaults.
I didn't do FIRMWARE default.
Thanks for your help.
I don't have any spring effect at all anymore, can not get it back!!!
I did a factory reset by importing the Rhino defaults.
I didn't do FIRMWARE default.
Thanks for your help.
Tpotentiometer is at 0, try turning the potentiometer up
CPardon my ignorance but how do I do that?
TNo worries, turn the little knob on the top of the Rhino, not the power button but the other little one.
Tyou should hear some beeping from the unit as it changes.
CTrying
CThat is it, It must have been touched by accident!?
But that fixes it, thank you very much for your help!
But that fixes it, thank you very much for your help!
CThat happened to me accidentally already a few times as well. Happens easily when turning on the device. Since then I Always check it‘s set properly.
SHappened to me i dont remember exactly why but turned it to 0% because i wanted to do something went to bed and next day i was like wtf i going on rhino broke???
STelemffb today seems to lag
SAny idea what may happend?
SToday i Updated the configuratuar to the latest verizon and i had opened configurator and telemffb. Maybe i should not do that?
Sit lags only when i am on game
Son Monitor tab works great at setting tab it lags
HI have VP config (two instances) and TelemFFB always open while flying DCS because I am constantly fine tuning my profiles. I doubt that this is the reason for your issues.
Do you have any other export scripts running?
Do you have any other export scripts running?
SNo I do not.yesterday was working great