DevHeads IoT Integration Server•14mo ago

I wonder how it communicates between them

Ssegfaultdev.elf I wonder how it communicates between them

melta101•11/29/24, 7:46 AM

99% are normally done using mailbox

melta101•11/29/24, 7:47 AM

every company adds thier own flavour to it

Mmelta101 99% are normally done using mailbox

segfaultdev.elfOP•11/29/24, 7:47 AM

so mailbox and semaphore works fine

segfaultdev.elfOP•11/29/24, 7:47 AM

:excusemewhat:

melta101•11/29/24, 7:47 AM

that is why OpenAMP is coming to clutch to bring them all together

segfaultdev.elfOP•11/29/24, 7:47 AM

have to order one nowwwwww

Ssegfaultdev.elf so mailbox and semaphore works fine

melta101•11/29/24, 7:47 AM

mailbox is a protocol

Mmelta101 mailbox is a protocol

segfaultdev.elfOP•11/29/24, 7:47 AM

I know that

segfaultdev.elfOP•11/29/24, 7:48 AM

like one core puts some messages in a memory location in id:value pair

segfaultdev.elfOP•11/29/24, 7:48 AM

and other one reads that with the id

segfaultdev.elfOP•11/29/24, 7:48 AM

It was something like that as far as I can remember from my OS course

Ssegfaultdev.elf and other one reads that with the id

melta101•11/29/24, 7:49 AM

yep,
That's the gist

Mmelta101 yep, That's the gist

segfaultdev.elfOP•11/29/24, 7:50 AM

I thought about buying milk v duo

segfaultdev.elfOP•11/29/24, 7:50 AM

but only reason for not buying is I thought both of it cores are risc-v

segfaultdev.elfOP•11/29/24, 7:51 AM

and I am a arm cortex m guy

Ssegfaultdev.elf and I am a arm cortex m guy 🤧

melta101•11/29/24, 8:00 AM

should'nt limit urself
Go beyond!

Mmelta101 should'nt limit urself Go beyond!

segfaultdev.elfOP•11/29/24, 8:01 AM

limited by pocket money and calculus

melta101•11/29/24, 8:03 AM

valid point

Mmelta101 valid point

segfaultdev.elfOP•11/29/24, 8:21 AM

me doing my own calculation how to spent money efficiently

Accur4te•11/29/24, 1:43 PM

I am working on this remote instrument , this instrument is to be desinged to be set up in remote location (stand alone) . So its battery powered , i am planning to use 4g gsm module to upload the data on the cloud , but i am facing power consumption issue . As the device is designed to send data every 1hr , it will be on sleep mode majority of the time , but when i need to send data , gsm has to booted up . But during the boot time the gsm is pulling a lot of current ( came to know its a common issue with gsm ) . Is there any alternative iot solution that i can use ?

AAccur4te I am working on this remote instrument , this instrument is to be desinged to be...

madness•11/29/24, 1:53 PM

can you add a solar panel?

Mmadness can you add a solar panel?

Accur4te•11/29/24, 2:02 PM

no we can't

ZacckOsiemo•11/29/24, 2:15 PM

Hey team! In around 45 minutes we have @32bitSaviour taking us through getting into open source with today's Office hour, come one, come all. https://discord.gg/wHyb3Dyj?event=1304503154469113886

melta101•11/29/24, 2:22 PM

100 interested
nicee!

ZZacckOsiemo Hey team! In around 45 minutes we have @32bitSaviour taking us through getting ...

techielew•11/29/24, 3:04 PM

Hey @Event Pings, we're live! Join the DevHeads as we dive into contributing to open source projects! If you're a @Middleware & OS dev we're looking forward to hearing you share your experience!

kongz77•11/29/24, 4:03 PM

Kkongz77 Hi

ZacckOsiemo•11/29/24, 4:20 PM

Hi and Welcome to DevHeads, could I ask what you are working on at the moment and how can we assist?

legacy_writes•11/29/24, 8:02 PM

Hi. Here to learn from the 2000+. Hope I also have information that might be helpful to any of you.

AAccur4te I am working on this remote instrument , this instrument is to be desinged to be...

Umesh Lokhande•11/30/24, 7:33 AM

As we don't know how many sensors and interfaces you need for this application, I'd like to know if ur planning to use a 4g gsm module with an MCU or just a module. You'll find some modules with support for low-power modes + basic peripherals support with interrupts (wake-up) on the radio module itself

Shaurya•11/30/24, 11:28 AM

hey there i am working on a project of lightning detection system

Shaurya•11/30/24, 11:28 AM

any one experinced in this type of project

SShaurya hey there i am working on a project of lightning detection system

melta101•11/30/24, 1:02 PM

how are you planning to detect the lightning?

UUmesh Lokhande As we don't know how many sensors and interfaces you need for this application, ...

Accur4te•11/30/24, 1:09 PM

Its a paddle wheel flowmeter , its using hall effect sensor along with (16X02)lcd . We are looking forward to build a custom module or integrate a module with it (just module no mcu) . The original instrument is powered by 2 X 1.5 VDC Duracell battery & has atmega32 micro controller on board .

AAccur4te Its a paddle wheel flowmeter , its using hall effect sensor along with (16X02)lc...

Umesh Lokhande•11/30/24, 4:21 PM

What I understood is that signal conditioning is taken care by the existing sensor circuit which is powered over 1.5 VDC batteries. The best way is to run GSM module with its dedicated batteries. And, as per the power reality of 4G module goes. You can try get best out of handling interface (basic to read data) and sending to cloud. Browse quectel's portfolio. If you are in Pune, give a call to Millennium Semiconductor and speak to their FAE to find out which gsm module will serve your needs.

Afuevu•12/1/24, 3:20 AM

Hello @here, @ZacckOsiemo @Umesh Lokhande @undefined.elf I have been working on the design and implementation of an energy meter. So far, I have been able to read my AC voltage and current successfully using differential amplifiers, calculate the power, and also get my energy in kWh. I am currently working on connecting the device to a server using GPRS, specifically, I am using the sim800C gsm module to do this. I have written the drivers for the UART and tested the sending and receiving functions, i made some pushes to github, here is the link, you can please check it out and let me know your thoughts

: https://github.com/DevHeadsCommunity/AC_CURRENT_MEASUREMENT/tree/GPRS

GitHub

GitHub - DevHeadsCommunity/AC_CURRENT_MEASUREMENT at GPRS

Contribute to DevHeadsCommunity/AC_CURRENT_MEASUREMENT development by creating an account on GitHub.

AAfuevu Hello @here, @ZacckOsiemo @Umesh Lokhande @undefined.elf I have been working on...

ZacckOsiemo•12/1/24, 4:01 AM

No readme

ZZacckOsiemo No readme 😱

Afuevu•12/1/24, 4:03 AM

The readme is on the main branch, i am just working on a feature so i created a new branch, i will merge when done with this feature

ZacckOsiemo•12/1/24, 4:03 AM

shin-de•12/1/24, 2:02 PM

anybody can help me with the code to use gpt api in python??

techielew•12/1/24, 2:46 PM

Hey @Event Pings and @Middleware & OS devs,
We're 15 minutes away from the Engineering Hour session on Gesture Recognition with TF Lite and FreeRTOS. You have a couple ways to tune in:
* Livestorm meetup platform (recommended): https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1
* Discord Engineering Hour stage channel: https://discord.com/channels/1130679493799977062/1212286094830477323

We'll see you in a few.

DevHeads IoT Integration Server

Gesture Recognition Pipelines, Training & Model Deployment with TF ...

Join DevHeads meetups to connect with other DevHeads and riff on a variety of topics for 30-60 minutes. Join here: https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1/live#/....

Afuevu•12/1/24, 4:29 PM

Great session @ZacckOsiemo , @wafa_ath and @undefined.elf

ZacckOsiemo•12/1/24, 4:29 PM

Thank you @Afuevu

ZacckOsiemo•12/1/24, 4:29 PM

any questions

Afuevu•12/1/24, 4:38 PM

For now no questions, I'm looking forward to next week

Afuevu•12/1/24, 4:46 PM

So I have been working on an energy meter project for some time, I have implemented some nice functionality like voltage and current readings using differential amplifiers. I will be having a session to talk about these things on Wednesday Dec 4, 5 pm WAT. I would appreciate it if you @here were present, here is the link: https://app.livestorm.co/p/5507168f-31d9-45b5-9cf8-242db90bc4d8/live?s=79b27e95-039c-4ba8-8d9e-6be2a64e75c7

Design and Implementation of energy meter | DevHeads IoT Integratio...

Afuevu•12/1/24, 4:47 PM

I'll be using Ltspice to explain how I went about measuring ac voltage and current using op amp in differential mode

AAfuevu Great session @ZacckOsiemo , @wafa_ath and @undefined.elf

wafa_ath•12/1/24, 4:57 PM

I think it's been recorded to those who missed it

az sum misho•12/1/24, 8:12 PM

hey guys, i will try to make a mini project for motion detection in my room and the temperature. i have a 830 point breadboard, arduino m-m cables and i use ESP-32S
DHT-11 for the temperature sensor and PIR rosfix hc-sr501 for the motion

it will be my first try at anything IOT, any ideas/tips and if its going to work? or i need more things?

segfaultdev.elfOP•12/1/24, 10:54 PM

have anyone used tft_eSPItft_eSPI library before?

segfaultdev.elfOP•12/1/24, 10:59 PM

I am trying to use tft_eSPItft_eSPI library with esp32c3esp32c3 and ST7789ST7789 tft but it is not working

I wonder how it communicates between them

Similar Threads

Similar Threads

Similar Threads