HI mean, for a few hundred gigs, unless you have a great connection, it might still take a while
FHad no clue for this!
Will give it a try for sure
I do have 1Gbps connection from home and server as well
Used rclone 1st time, was quite fast for approx. ~2mil files and ~160GB vs aws-cli which took me a full day for only ~50GB and ~1mil
Will give it a try for sure
I do have 1Gbps connection from home and server as well
Used rclone 1st time, was quite fast for approx. ~2mil files and ~160GB vs aws-cli which took me a full day for only ~50GB and ~1mil
HHuh, weird. Might be doing something wrong, but seems to pull via my device for me
HYep, same bucket too
HJust confirmed, if you need GDPR compliance, then you should use the EU jurisdiction
FGot it, thank you for such fast check and response! I'll write down this information for a reminder for my further buckets.
FMay I also ask, since I haven't tested much yet, is there any difference for EU jurisdiction bucket, e.g. are files served from EU IP addresses?
https://community.cloudflare.com/t/site-ip-address-changes-very-often/374169/4 -> reminds me onto this and then I wonder if I'd have some issues, with some ISPs blocking or limiting Cloudflare ...
https://community.cloudflare.com/t/site-ip-address-changes-very-often/374169/4 -> reminds me onto this and then I wonder if I'd have some issues, with some ISPs blocking or limiting Cloudflare ...
FOr it just does mean that the data is being kept inside the EU location(s) for the buckets.
FMay I use this opportunity and ask if there is any difference, or need for this to get it work in the config file for rclone? 
Or just define and use R2 API Token which can access read-write for both buckets?
Or just define and use R2 API Token which can access read-write for both buckets?
FGot it, thank you for feedback and help
TI asked yesterday but didn't provide an example. I have this R2 custom domain setup automatically by "connecting" it. It's returning a 301 for any URL back to the URL requested. Here's an example: https://sniff.lololo.lol/hello.txt -- I have checked every set of config for the zone and there's no page rules / redirects / etc.
HWeird
Tthere's no redirects enabled for the domain -- except maybe those for https in the ssl config
Tdoes r2 only work over http ?
Ti disabled https rewrites an hour ago
T"Automatic HTTPS Rewrites" in the edge certs section that is
CYour SSL/TLS mode is "Off"
TAHAH
Tthanks!
Cshould go Full (Strict) or Strict (SSL-Only)
Cenough to disable the redirect? sure.
something you should use in production? never
something you should use in production? never
Tyeah, it was disabled and then http->https redirects were enabled
Tso it got into a little loopies
CI thought R2 Custom Domains were HTTPS only/enforced by the zone under the R2 Custom Domain, evidently not tho
HThis is via the latest via Homebrew, so it should
be up to date
be up to dateHWill check later
HI have an old key, and no region, but otherwise same
HIsn't Server-Copy a standard thing for S3?
HCan do Multipart Copy?
FMay I ask could we expect somewhere in future to be able to filter buckets on the bucket list, e.g. per location / jurisdiction?
Might be it's able to do it via API, but not on the Dashboard, yet.
Thank you!
Might be it's able to do it via API, but not on the Dashboard, yet.
Thank you!
FIf we have e.g. sub-domain on bucket, example:
a) mydomain.hr is main domain
b) then I've got sub-domain sub.mydomain.hr
c) for r2.sub.mydomain.hr -> do I need to pruchase Advanced Certificate Manager to cover that R2 Custom domain which seems to me to be an deep-level sub-domain?
a) mydomain.hr is main domain
b) then I've got sub-domain sub.mydomain.hr
c) for r2.sub.mydomain.hr -> do I need to pruchase Advanced Certificate Manager to cover that R2 Custom domain which seems to me to be an deep-level sub-domain?
EI wonder if this is related to my issue...
Eit's a periodic seize up issue
Ejust goes non responsive
Ei do the same operation maybe 500 times and it has various amounts of latency from non to 20 seconds to a full timeout
Ethis is a get operation
Every few
Ein what timeframe?
Eno
Eit depends on if a CI job is running. but typically none for a significant block of time
Eso when doing this test probably 0
Ewhen i did the rclone from digital ocean i was also seeing intermittent full hangs. not sure if that's similar to what you mentioned. at the time i couldn't tell if it was them or R2
Eshould not be unstable...
FIt works! No need to purchase ACM 
Tested few moments ago
Tested few moments ago
Eyes but this just started happening when switching to R2. same application did not show this behavior with digital ocean
Ealso since it's gitlab i can't easily change the code
Enot a runner. it's the server backend
Ewhich i am running self hosted
Tohhh, it was using "automatic" which made a recommendation of disabling ssl