Lastly, there have been a few that desk mounted, but they made a slight modification to support the

Lastly, there have been a few that desk mounted, but they made a slight modification to support the mount from the floor as well. You can find some examples here, use the discord search to make it easier.

FFierce_Fire Lastly, there have been a few that desk mounted, but they made a slight modifica...

KangaRooskie•12/25/24, 8:21 PM

Nice, thanks!

FFr4Ged I mean I am pretty sure you don't really have any forces in the stick of at leas...

Bob Bushman•12/25/24, 9:03 PM

should have some transitional flutter between flight and hover, handy way to tell where you are in the transition or if you are getting slow without having to constantly stare at the speed indicator.

FFr4Ged I mean I am pretty sure you don't really have any forces in the stick of at leas...

Sudeebare•12/25/24, 11:59 PM

The question is whether the cyclic stick movement on either axis requires more that fingertip pressure.

Fr4Ged•12/26/24, 12:45 AM

Oh, gotcha

SSudeebare How strong should cyclic control stick forces be set in the AH-64D and Huey to ...

Red Magic•12/26/24, 4:38 AM

Uh none..?

Red Magic•12/26/24, 4:39 AM

Well idk about Huey but Apache yeah, none. I've literally moved the stick with my pinky before

Red Magic•12/26/24, 4:41 AM

All the actual stick action is a short few linkages that go to the servos. Very short travel distance (well for the pilot at least) but the front and back seat are obviously linked.
Anyways yeah, not really anything

Red Magic•12/26/24, 4:43 AM

Really the only force your feeling is going to be from the trim magnet. That, idk. But enough to hold the stick in place during some decent shaking or vibration so probably fairly strong

Merc•12/26/24, 6:53 AM

Hey all, I already got my Rhino awhile back but just now making my mount and cockpit for all my gear to actually implement it. I was eyeing the winwing viper stick that is modelled of the F-16V sticks. I've deduced WinWing requires an adapter for the Rhino but not really able to tell what exactly it is? I don't own any Winwing products currently. Just wondering if it is something proprietary or if I can find two plugs and run wires to make it real quick.

SSudeebare How strong should cyclic control stick forces be set in the AH-64D and Huey to ...

Merc•12/26/24, 6:58 AM

Never flew an apache but generally they hold roughly in place hydraulically with very little 'slop' with a stick trim system being on. Most of my flying (S-58Ts) with similar systems is with the stick trim off, where you're not really going to feel anything through the stick. *The collective however.... �� *

RRed Magic Uh none..?

Sudeebare•12/26/24, 1:22 PM

I'm trying to make sense of this post on the DCS Forum. Is this "high 30's" force referring to force generated by the magnets and is it always on? That would seem to conflict with "pinky" level force to intentionally move the stick.

SSudeebare I'm trying to make sense of this post on the DCS Forum. Is this "high 30's" forc...

Fierce_FireOP•12/26/24, 1:26 PM

I presume the 30kg is with trim. For the pinky feel people are talking with trim disabled, in other words holding down the trim button

SSudeebare I'm trying to make sense of this post on the DCS Forum. Is this "high 30's" forc...

Red Magic•12/26/24, 2:34 PM

The only force he could be talking about is that magnet. Or the force needed to roll the ARDDs which then converts the 64 to using BUCS. But DCS doesn't model that because that'd be a force related thing

Red Magic•12/26/24, 2:34 PM

There is no natural resistance to the stick when the force trim is interrupted. Pinky pressure

Red Magic•12/26/24, 2:41 PM

Hell i only needed pinky pressure on an even shorter lever than than the stick itself. I was reaching over to the servos and using my finger to move a ~4in arm. Control side there's almost no resistance or effort really needed to move through controls. If there is, that's a problem (and why BUCS exists). All the heavy lifting is through servocylinders and the 3000psi behind them to move the rotorhead

Bob Bushman•12/26/24, 2:58 PM

My first car was a volvo 240 1981, no power steering and 10° slop in the wheel (can't really believe it was road worthy, but it was)

Dear God I love power steering. And cruise control.

Red Magic•12/26/24, 3:37 PM

My Kia Soul doesn't even have cruise control

Red Magic•12/26/24, 3:38 PM

Or remote start. Remote unlock. Fog lights. Bass speakers. Or automatic xmsn

Red Magic•12/26/24, 3:39 PM

But I get 32mpg so

Fr4Ged•12/26/24, 5:10 PM

remote start and cruise control is something for the "too expensive" car class

Bob Bushman•12/26/24, 5:29 PM

Yeah, not sure I see the point of remote start.
Don't really see a reason to start the car unless I'm in it.

But cruise control, is a huge QOL improvement.
Only time I'm not using it is roundabouts, near speedbumps and bumper traffic.

And it's part of the basic package for my little vw up.

Vakarian•12/26/24, 5:32 PM

Start the car up early during the winter/colder times so it heats up a bit before getting in it?

Bob Bushman•12/26/24, 5:55 PM

That's why you have electric engine block heaters on a timer, or secondary heater on the diesel line.
Besides haven't really had much issues starting fuel injected cars unless it gets below -25c.

My brother in laws volvo had one of those APU style engine/cabin heaters, sure nice to get it warmed up.

But as it is a volvo there was a glitch in the fuel gauge, so as soon as temps hit -8c the car thought it had no diesel and refused to start it, so you had to start the main engine anyway.
And honestly that's basically when you started needing it in the first place.

BBob Bushman Yeah, not sure I see the point of remote start. Don't really see a reason to sta...

Red Magic•12/26/24, 6:30 PM

Remote start is too preheat the car

Red Magic•12/26/24, 6:31 PM

Was at my aunt/uncles yesterday for Christmas and my mom remote starts her car

Red Magic•12/26/24, 6:32 PM

I walk outside, get in, clutch, start, come back inside. "That's how I remote start mine"

Bob Bushman•12/26/24, 6:36 PM

Aye, I remember being my dad's automatic ice scraper as well

FFierce_Fire I presume the 30kg is with trim. For the pinky feel people are talking with trim...

Sudeebare•12/26/24, 10:39 PM

So "pinky" pressure while holding down the trim button I understand. When hand on stick to adjust pitch or trim without touching the trim button tough, the normal situation, could a 30's Nm max force be needed or even possible? I'm assuming that there must be enough built-in resistance to prevent unintended motion.

SSudeebare So "pinky" pressure while holding down the trim button I understand. When hand o...

Fierce_FireOP•12/26/24, 10:41 PM

It is definitely not neccesary, or possible with the rhino. Its not 30Nm though, its 30Kg at 300mm, or ~90Nm

Fierce_FireOP•12/26/24, 10:42 PM

but thats for the real life AH-64, while I find my ~5kg quite hard to move

FFierce_Fire It is definitely not neccesary, or possible with the rhino. Its not 30Nm though,...

Sudeebare•12/26/24, 10:50 PM

Of course those high force levels are not possible for Rhino or ffBeast. So my takeaway then is that, when the trim button is not being depressed, any spring stiffness that does not create a motor overheat situation or impede aircraft controlability is reasonable(?)

Fierce_FireOP•12/26/24, 10:51 PM

guess so

Fierce_FireOP•12/26/24, 10:51 PM

Personally I make it possible to move a little bit, as the low force from deactivating trim makes hovering quite hard

ReapDaddy•12/26/24, 11:07 PM

Walmis- Thank you and everyone at VP Force for this wonderful gear. I received my base about two months ago, but it was a Christmas present so I have only gotten to mess with it for parts of two days now. WOW, I am absolutely impressed with not only the hardware, but also the FFB Configurator and TeleFFB both up and functioning without issue. Don't get me wrong I am sure that I will be changing things as I get to know FFB better, but this experience has been fantastic. I have been flying mostly rotors lately and this has been a HUGE switch in control, to the better. I am sure I am not the only one that wishes I could have skipped all the other joystick bases on my journey to this piece of art. It just works! Beautifully. Thanks again! I am now waiting on my FLNKR grip that is to be paired with it.

MMerc Hey all, I already got my Rhino awhile back but just now making my mount and coc...

ReapDaddy•12/26/24, 11:12 PM

If you got the TM Warthog grip it would recognize natively. They are the same grip layout (A10/F16). I am actually using my old TM Cougar grip until my FLNKR arrives.

RReapDaddy If you got the TM Warthog grip it would recognize natively. They are the same g...

Merc•12/26/24, 11:23 PM

I know the Rhino supports the TM gear, but am looking to see what the adapter is that I need to make the Rhino work with the WinWing stick as a possible upgrade. WinWing's TM adapter is sold out on their site and looks like it won't be coming back from what I could see, but IDK if that's the one needed to work with the Rhino.

MMerc I know the Rhino supports the TM gear, but am looking to see what the adapter is...

ReapDaddy•12/26/24, 11:33 PM

VPForce sells a WinWing adapter

FFierce_Fire Personally I make it possible to move a little bit, as the low force from deacti...

Red Magic•12/26/24, 11:40 PM

This is what I do as well. If I'm trimming to go into a hover, the hover mode frequently wants to wig out and increase its oscillation until it turns off and get a SAS saturated message. So now when I trim for a hover, I keep putting some input in to manually dampen the oscillation so it stabilizes

Hammer 1-1•12/27/24, 2:21 AM

how well does it work in the apache?

Hammer 1-1•12/27/24, 2:21 AM

also I have a vkb, where would I find an adapter for that stick?

Hammer 1-1•12/27/24, 2:22 AM

supposedly Im #1038 and hopefully will be getting mine in the next month or so, so getting stoked myself

Hammer 1-1•12/27/24, 2:23 AM

ordered in august

Blaubär | Michael•12/27/24, 9:29 AM

When will the new software be released as stable?

HHammer 1-1 also I have a vkb, where would I find an adapter for that stick?

Fr4Ged•12/27/24, 11:07 AM

it does work very well with any DCS helicopter.
Walmis sells the grip adapters as well. you can choose options once you are up for the order.

Vulture•12/28/24, 9:14 PM

Quick question: do you guys turn off power to your Rhino when not in use by pressing the Panic Button on the base?

VVulture Quick question: do you guys turn off power to your Rhino when not in use by pres...

Boggy•12/28/24, 9:45 PM

I do

Boggy•12/28/24, 9:46 PM

And I always turn the force to minimum. I'm worried it will snap up when I start a mission and smack me in the balls!

VVulture Quick question: do you guys turn off power to your Rhino when not in use by pres...

kaltokri•12/28/24, 10:04 PM

I have my Rhino things on a switchable power socket which I always switch off when I don't need them.

Boggy•12/30/24, 1:57 PM

Probably a dumb question but, do you need to start VPForce every time you want to use the Rhino with DCS?

Bob Bushman•12/30/24, 2:00 PM

Not necessarily required but handy for tweaking, logging potential bugs etc

Telemffb needs to run for sim connectivity and effects beyond native directx effects.

Lastly, there have been a few that desk mounted, but they made a slight modification to support the

Similar Threads