I don't think you would be able to plug the Rev.C into Rev.B, though you need to connect the adapter

I don't think you would be able to plug the Rev.C into Rev.B, though you need to connect the adapter into the "stick" socket, not the "bus" one.

In DCS you should have the grip as separate controller

GG. R. Cooper turned off loopback. No buttons work now. Reset the Rhino to Factory reset. S...

walmis•1/6/25, 4:19 PM

Rev B and Rev C are very distinct, rev C is like a headphone connector - you wouldn't be able to plug a revC grip to a revB adapter.
If VKB software shows as working then the adapter is fine. Are you running the Loopback application if you wish to pass the button presses to the Rhino firmware.

SSundowner I don't think you would be able to plug the Rev.C into Rev.B, though you need to...

G. R. Cooper•1/6/25, 4:20 PM

that could be it - I didn't check to see if the grip was a second controller in DCS, and would explain why it was kinda working with Loopback.

G. R. Cooper•1/6/25, 4:26 PM

it is showing as its own controller, but buttons/axis for the grip still don't work. I'll try it with Loopback again after I dig out of an inch of ice that fell overnight. Thanks for the help guys

m2times_•1/6/25, 7:22 PM

i ordered the vpc vmax throttle, it got delayed from november to january, still hasnt shipped

m2times_•1/6/25, 7:22 PM

ohh they moved it to february now, wauv

Old Prospector•1/6/25, 7:29 PM

US?

Bob Bushman•1/6/25, 7:32 PM

Why you don't pre-order.
And always wait for at least the second if not third production run.

m2times_•1/6/25, 7:36 PM

there was a substantial discount but i guess we know why

OOld Prospector US?

m2times_•1/6/25, 7:38 PM

no, europe. says february on product page now

Bob Bushman•1/6/25, 7:38 PM

Aah well I'm sure they will deliver, might be later than one would want

m2times_•1/6/25, 7:38 PM

yeah no rush, still got a month of wait for my rhino. And the pimax VR too

m2times_•1/6/25, 7:38 PM

still got to design my own mounting brackets/plates for all that

Bob Bushman•1/6/25, 7:39 PM

I got my old t50 throttle after three months wait, and that was second or third production run..

m2times_•1/6/25, 7:41 PM

i wonder how problematic will it be to fit a throttle next to a stick with a z-extension

m2times_•1/6/25, 7:42 PM

anyone running such a setup?

Bob Bushman•1/6/25, 7:43 PM

Why should that be a problem?

m2times_•1/6/25, 7:44 PM

i mean, both the stick and throttle would be for the left hand

m2times_•1/6/25, 7:44 PM

I'm afraid about the clearance the z extension needs to the left

m2times_•1/6/25, 7:44 PM

i don't want to have to put the throttle super far out

m2times_•1/6/25, 8:43 PM

another thing, to space simmers - if you have an omni throttle, do you use a cam with center detent, or no detent? I plan to keep my springs on both axes

Grasownik•1/6/25, 9:04 PM

Hi.
I own a competing Moza product, AB9. I joined this server yesterday, looking for information on how FFB forces work in War Thunder in Direct Input mode. I see that not only AB9 users have a similar problem with the full cooperation of this game with their devices. I have been struggling with this problem for over a week and looking for a solution, unfortunately to no avail, but I have some interesting observations, so if anyone here would like to talk about it, I invite you to the discussion.
If necessary, please give me an appropriate rank on this server.

JJon (Bounty_V)genuine question - why are you replying to comments made a long time ago?

fishnibbler•1/6/25, 9:30 PM

Ah, I'm new and figured I'd get in on the shifter use-case chat

fishnibbler•1/6/25, 9:30 PM

That was one of the most recent and I didn't look at the date

fishnibbler•1/6/25, 9:32 PM

Might as well ask: What's the current state of using this as a shifter?

fishnibbler•1/6/25, 9:33 PM

I built/like the Lebois Racing SRT Gearbox v10, but I've wanted a FFB shifter since seeing this vaporware demo: https://www.youtube.com/watch?v=X1BKkZs3DvA&ab_channel=IrisDynamicsLtd.

YouTubeIris Dynamics Ltd.

Magnetic Force Feedback Joystick

High performance, ultra-low latency, and silent, ideal for human-machine interaction.
⇩
-------------------
Subscribe

! Follow us on LinkedIn, or join our mailing list by sending us a message on our website to keep up to date.

Contact Us Today! - https://irisdynamics.com/contact/?utm_content=Magnetic_Force_Feedback_Joystick

View Website - http...

fishnibbler•1/6/25, 9:36 PM

Then saw Walmis' demo on the Rhino that everyone keeps posting. Right around then was also when I learned about the Moza AB9 and FFBeast.

fishnibbler•1/6/25, 9:39 PM

Can't wait till we get a truly viable software solution. Seems like that's the only missing step. The hardware is already here.

fishnibbler•1/6/25, 9:42 PM

I'm very interested in DIY and would love to be on team VPForce and/or FFBeast.

BBozo VFA-86 Airbus ish

elijahautistic•1/7/25, 3:56 AM

Hey there, kind of reviving an old post, but what's up with your grip ? Is this a modded thrustmaster grip ?

Eelijahautistic Hey there, kind of reviving an old post, but what's up with your grip ? Is this ...

Bozo VFA-86•1/7/25, 4:34 AM

Realsimulator F16 grip

Eelijahautistic Hey there, kind of reviving an old post, but what's up with your grip ? Is this ...

Bozo VFA-86•1/7/25, 4:36 AM

📃general

I-WVoss•1/7/25, 5:03 AM

Good morning everyone!! Have any of you had the same problem as me, that the DCS F4 once in the flight tends to violently To go up high, and your Rhino apparently responds consistently?

BBozo VFA-86 Realsimulator F16 grip

elijahautistic•1/7/25, 5:36 AM

Thanks !

VPforceBot•1/7/25, 9:09 AM

:package:

RHINO #0852 Has Shipped!

VPforceBot•1/7/25, 9:09 AM

:package:

RHINO #0853 Has Shipped!

Danielle | "Redstar"•1/7/25, 6:48 PM

Hi, QQ, I am looking into the VPforce base DIY kit, do I have to join some waiting list first? If so, what are the wait times? Thank you.

Dracks•1/7/25, 7:10 PM

Dracks•1/7/25, 7:10 PM

It's here !!!

Dracks•1/7/25, 7:10 PM

Ans some gifts !

Dracks•1/7/25, 7:10 PM

Dracks•1/7/25, 7:11 PM

Bob Bushman•1/7/25, 7:11 PM

Nice, could have been vodka though.

Dracks•1/7/25, 7:12 PM

It's really nice. It's seems a higher quality than my Alpha (and it's already a great quality)

Dracks•1/7/25, 7:12 PM

I'm going to test it tonight !

Xaero Zero•1/7/25, 7:13 PM

dope!

Dracks•1/7/25, 7:18 PM

And the last gift (?)

Dracks•1/7/25, 7:18 PM

DDanielle | "Redstar"Hi, QQ, I am looking into the VPforce base DIY kit, do I have to join some waiti...

f14billy•1/7/25, 7:20 PM

For diy kits (Motors and main board) there's no wait time since they are usually in stock. For the other parts you have to either 3D print them yourself or you can order some pre built parts that are offered here and those take a few weeks to source, print, assemble and ship to you.

Danielle | "Redstar"•1/7/25, 7:21 PM

@f14billy ahh, got it! I would need all of the other parts too as I don't have a decent 3D printer. Thx

Dracks•1/7/25, 7:22 PM

I don't think you would be able to plug the Rev.C into Rev.B, though you need to connect the adapter

Similar Threads