Cloudflare Developers•11mo ago

Something broke with the time selection. It registers mouse clicks as a hold

MMozzy Something broke with the time selection. It registers mouse clicks as a hold

rohin•1/21/25, 5:32 PM

thanks for the report @Mozzy! we're on it

MozzyOP•1/21/25, 5:57 PM

cheers

MozzyOP•1/23/25, 2:26 PM

Are notifications/emails/triggers on error thresholds currently planned for the future? Or real-time error alerts as mentioned before

matt•1/25/25, 10:02 PM

will otel traces be viewable in the cloudflare dashboard at some stage? currently i'm using baselime (was using honeycomb) - but also looking at other options if anyone has recommendations

matt•1/26/25, 1:05 AM

in baselime how do you customize how spans appear? some have cloudflare/http/nodejs icons etc

matt•1/26/25, 1:06 AM

ah i think it's because im using the newer semconvention attrs, need to go back to the old ones ie. ->

Original message was deleted

Thomas Ankcorn•1/27/25, 1:23 PM

Currently there is a limit of 128kb of data limit for each workers invocation.

The sample rate works on an invocation by invocation basis.

i.e. a sample rate of 30% means you will get all the logs for 30% of your invocations and 0% of the logs from the rest.

To fix this you want to look at consolidating your logging for each invocation and make sure you are not logging unecessary data.

Hope this helps

Mmatt will otel traces be viewable in the cloudflare dashboard at some stage? currentl...

rohin•1/27/25, 6:52 PM

do you want to use cloudflare as an observability provider, similar to baselime? ie send traces from third parties and render it in the cf dashboard?

MMozzy Are notifications/emails/triggers on error thresholds currently planned for the ...

rohin•1/27/25, 6:53 PM

we're going to start with real-time errors, first

Rrohin do you want to use cloudflare as an observability provider, similar to baselime?...

matt•1/27/25, 7:05 PM

It would be nice to have everything in one place, I thought with the addition of worker logs that CF might be aiming to support the other 2 OTEL signals (metrics and trace spans)

Rrohin do you want to use cloudflare as an observability provider, similar to baselime?...

kchro3•1/27/25, 10:09 PM

... i thought that the goal was for cf to support alerting by early this year?

otherwise what was the point of buying & phasing out baselime?

Mmatt It would be nice to have everything in one place, I thought with the addition of...

rohin•1/28/25, 5:47 AM

got it! yep, we're actively working on this

�

😈 Donkey 💫•1/28/25, 5:55 AM

I can't access Worker logs in past 12hours

dhkl•1/28/25, 6:19 AM

Same here

dhkl•1/28/25, 6:19 AM

dhkl•1/28/25, 6:19 AM

Seems to affect newly deployed workers only

dhkl•1/28/25, 6:20 AM

Wonder if we're going to lose logs over this, or if it's just a display issue

Walshy•1/28/25, 7:16 AM

https://www.cloudflarestatus.com/incidents/jwxdzrmbgyn9

Workers Logs dashboard availability

WWalshy https://www.cloudflarestatus.com/incidents/jwxdzrmbgyn9

dhkl•1/28/25, 9:50 AM

It's back up. Thanks!

�

😈 Donkey 💫•1/28/25, 10:09 AM

Thanks.
Btw, It hangs the browser tab, sometimes when I expand a log. You guys acknowledged?

Ddhkl Wonder if we're going to lose logs over this, or if it's just a display issue

Maksym•1/28/25, 11:12 AM

it's just display issue, the actual data is intact

Aster•1/31/25, 10:00 AM

Hello!

I have a question about tail workers.
We want to balance what is best between good DX and easy integration.
Currently if I understand correctly, each worker should have its own tail worker?
Because we are thinking to create 1 tail worker handling all our workers. For logs it's fine, but for sentry it makes it very complicated as this one tail worker should have knowledge about all the sentry DSNs...

What would be the recommended way? Note: we are using a monorepo

Bboristane your assessment is correct. I've used a single tail worker attached to multiple ...

Aster•1/31/25, 2:54 PM

It feels weird to have the tail worker handling all the SENTRY_DNS...
So would you say it is a better practice to instead have 1 tail worker per worker?

Aster•1/31/25, 2:54 PM

That's at least what seems to suggest the documentation

James•1/31/25, 9:44 PM

feature request: it'd be nice to be able to get a breakdown quickly in the overview of number of obs events per worker to see which ones are doing the most https://i.james.pub/file/2025/01/df95b736-f971-4d8a-bee6-4680466f1b9a.png

James•1/31/25, 9:44 PM

even if I click into a worker, I don't see a clear and easy way to get counts over a period of time without adding up all the events in the graph myself manually

ssandler•2/3/25, 6:22 PM

Any advice for using the https://github.com/evanderkoogh/otel-cf-workers with Durable Objects? The examples given don't seem to work with the current SDK, because they don't but rather implement it as an interface. Trying to run that yields a runtime error

Calling on a class that results in a different error:

PixelPulse•2/12/25, 2:19 PM

I was wondering if I could get some assistance on our baselime account which appears to be acting very buggy.
We saw some strange behaviour in the dashboard when our admin tried to give admin status to another team member.

This removed admin status from everyone and now we are all “contributors”. I’m not sure if these problems are connected but we also started seeing that our query pages were failing. When we would try going into a query it would flash something useful and then immediately go to an empty screen. Essentially we would see some UI and then it would almost immediately go blank.
Our dashboard right now has gone completely empty - we have zero environments and no logs displaying

PPixelPulse Hi 👋 I was wondering if I could get some assistance on our baselime account whi...

Peps•2/12/25, 2:51 PM

I've asked someone to take a look at it. Can you share more info about the org like name or id meanwhile?

PPeps I've asked someone to take a look at it. Can you share more info about the org l...

PixelPulse•2/12/25, 3:07 PM

Thanks for your help! Our org name is Skillibrium

nestorF•2/12/25, 3:33 PM

@PixelPulse Thanks for raising this issue. Would it be possible for you to provide the Email address you use in Cloudflare so that we can create a case for you?

NnestorF @PixelPulse Thanks for raising this issue. Would it be possible for you to provi...

PixelPulse•2/12/25, 3:58 PM

Sent it via dm

Manu•2/13/25, 12:07 PM

Hi folks
My baselime dash has not been able to run any queries since the past few weeks
The queries page starts to load, and then blanks out
This is the error I see in the browser developer console

Would appreciate any help

P.S. This seems very similar to waht @PixelPulse is experiencing
Our org name is

MManu Hi folks My baselime dash has not been able to run any queries since the past fe...

Peps•2/13/25, 2:09 PM

can you share your email address for cloudflare.com here or in DM? Then I'll forward it again for someone to take a look at

�

😈 Donkey 💫•2/14/25, 3:23 AM

Hello, There're very limited fields supported by Logpush job. I can't even see the ipAddress in output. Any idea?

Bboristane hey Manu, thanks for reporting, we deployed a fix to this issue earlier, could y...

Manu•2/14/25, 6:48 AM

Hi @boristane
Appreciate the quick response
I can now see the requests in the requests tab (for queries), but the visualization tab is still not working, throwing errors on the console

�

🐉 🦾 Perrius The Platipomagus•2/17/25, 3:51 PM

Hey there,
Do you know if @opentelemetry/sdk-trace-node works correctly in cloud flare worker?

I have been trying to make automatic instrumentation via otel-cf-workers work, but for my usecase (one service spawns others via queue produce/consume) I just cannot make it work correctly, so if possible i would just like to manually configure the tracing.

�🐉 🦾 Perrius The Platipomagus Hey there, Do you know if @opentelemetry/sdk-trace-node works correctly in cloud...

�

🐉 🦾 Perrius The Platipomagus•2/17/25, 5:47 PM

Okay, I've checked. it doesn't. Some runtime errors appear when trying to execute the sdk initialization. Unless I did sth wrong.

�🐉 🦾 Perrius The Platipomagus Hey there, Do you know if @opentelemetry/sdk-trace-node works correctly in cloud...

Thomas Ankcorn•2/19/25, 10:57 AM

It does not. If you want a 3rd party solution this is great https://github.com/evanderkoogh/otel-cf-workers but its worth reading through the issues and making sure you don't need something that doesn't currently work

GitHub

GitHub - evanderkoogh/otel-cf-workers: An OpenTelemetry compatible ...

An OpenTelemetry compatible library for instrumenting and exporting traces for Cloudflare Workers - evanderkoogh/otel-cf-workers

TThomas Ankcorn It does not. If you want a 3rd party solution this is great https://github.com/e...

�

🐉 🦾 Perrius The Platipomagus•2/19/25, 12:52 PM

Yeah, this is what i wrote in first message i had been using, but it does not properly instrument queue interaction, and also somehow makes it giga hard to manually extract tracing context from custom sources (eg queue message payload)

matt•2/19/25, 9:03 PM

anyone know what i need to add to a span to control the icon displayed in cloudflare's baselime UI?

�🐉 🦾 Perrius The Platipomagus Yeah, this is what i wrote in first message i had been using, but it does not pr...

Thomas Ankcorn•2/20/25, 11:33 AM

Thanks for the feedback

�

😈 Donkey 💫•2/24/25, 3:26 AM

I believe the worker log dashboard is broken in loading more
No matter time frame, it returns a few log lines and cannot load more when scrolling bottom

mihaaai•2/24/25, 10:15 PM

Is it possible that CF is dropping packages if 2 requests (2 websocket messages exchanges in my case) between my origin and a Durable Object happen too fast?
I'm sending 2 messages at 8 to 10ms distance between each others and they don't appear in Logs and the Durable Object is not responding back to my origin.

When adding some ms timeout on the server it picked them up correctly

RenderZ•2/26/25, 2:05 PM

I recently connected my OTEL setup to Baselime via the OtplExporter in .NET. I've got everything working, except for the traceId and spanId. I'm sending the correct traceId and spanId to Baselime, but it somehow turns it into a comma-separated byte array? This is causing the logs to be disconnected from the traces. Does anyone know how to fix this behaviour?

RRenderZ I recently connected my OTEL setup to Baselime via the OtplExporter in .NET. I'v...

�

🐉 🦾 Perrius The Platipomagus•2/26/25, 5:14 PM

How do you inject span id into logs, can u show the function?