FI do believe the list has to be updated manually or isn't updated live and every day
WSoon™ 
WSent a new batch of invites to order, your's included 
TAnd a New hand touches the Beacon 
Omy flnkr order in the first 5 mins of availability is still processing
OYayyyyyy I can now order \o/ woohoo
VOrdering while making up excues to Boss, aka wifie
PRhino 0878 has arrived! That was faster than I expected. USA (TX)
VWhile I am eagerly awaiting the invoice (not pushing here), is there any newbie guide or video out there telling how the base would work with DCS et al?
FIt almost is plug&play. Basically get the VPForce configurator, TelemFFB (optional) and set them up.
Check mark force feedback in DCS, set up instant trim for every module in the special settings and you are good.
Check mark force feedback in DCS, set up instant trim for every module in the special settings and you are good.
BTelemFFB is optional, but I definitely recommend it, although its all a but overwhelming at first, evn now with adding FFB pedals I am overwhelmed lol.
VThanks
VFrankly, i already have an AB9 and i also fly BMS. So i guess i will be fine. Thanks.
FYeah, the settings of the AB9 apparently are really similar for some reason
BJust by having telemffb running without any configuration except the absolute minimum to make it work is 70% of ffb experience. You loose a lot without it.
NEveryone needs to keep their fucking political opinions to themselves. A light hearted joke has no more place and is no less off topic than any other statement or suggestion of political nature.
This is not the place for it. I don't spend a significant amount of time in here to be inundated with keyboard warriors taking pot shots at each other. I don't give a shit what side your on or how aligned or opposed your political ideals are with my own.. Take it elsewhere.
This is not the place for it. I don't spend a significant amount of time in here to be inundated with keyboard warriors taking pot shots at each other. I don't give a shit what side your on or how aligned or opposed your political ideals are with my own.. Take it elsewhere.
THi everybody 
, a quick question for you guys technically more sophisticated than me:
Does it make a difference (in terms of being gentle to the Rhino hardware or keeping the motors in their comfort zone), whether you set "spring gain" to 100% in the config software and then dial down the potentiometer on the Rhino to, let's say to 50% versus setting "spring gain" to 50% in the config software and then cranking up the potentiometer to full whack?
, a quick question for you guys technically more sophisticated than me:Does it make a difference (in terms of being gentle to the Rhino hardware or keeping the motors in their comfort zone), whether you set "spring gain" to 100% in the config software and then dial down the potentiometer on the Rhino to, let's say to 50% versus setting "spring gain" to 50% in the config software and then cranking up the potentiometer to full whack?
NThe spring gain slider is the ultimate gating factor as to how strong the spring force can get. Gain slider at %100 with potentiometer turned to %50 is the same as Gain slider %50 with potentiometer at %100.
S100% x 50% = 50% x 100% but having the gain slider at 100% will allow you to adjust higher with the pot if you want more
Si keep mine at 100% 100% and use telemffb to lower the strength at various levels for different planes.. so when its on autopilot it's very strong but i'm not forcing it so motors stay happy
Xi do use 75% and it's more than enough to fight the stick and feel the preassure. I do no sweat as i am when simracing with 25nm base (i end up full wet after 2h race), but this 75% of 57 motor feels right and correct for any situation i've encountered
X100% spring gain would be hard to manage as side stick or center with no extension, there is no aircraft that will require that much of force i think
Xunless you fly birds and heavy lift things
T@Number481 @smitty thank you mates for the quick reply 
. I do understand the math, but I got no clue regarding electrical or torque forces in the Rhino (or in general, that is 
).
The reason that came to my mind in the first place was, that unnoticed by me, I must have dialed down the potentiometer to around 10 or 15%
and then got problems with stability (x axis went red) and I was wondering why the centering spring didn't work no more and everything felt spongy and floppy. So I thought maybe cranking up the potentiometer to 100% and never touching it again could prevent that issue. Smitty, I really like your suggestion to do the actual tuning in TelemFFB and thus having individual settings for each chopper 
...
. I do understand the math, but I got no clue regarding electrical or torque forces in the Rhino (or in general, that is ).The reason that came to my mind in the first place was, that unnoticed by me, I must have dialed down the potentiometer to around 10 or 15%
and then got problems with stability (x axis went red) and I was wondering why the centering spring didn't work no more and everything felt spongy and floppy. So I thought maybe cranking up the potentiometer to 100% and never touching it again could prevent that issue. Smitty, I really like your suggestion to do the actual tuning in TelemFFB and thus having individual settings for each chopper ...Xi guess my comments out of scope of question ) but still
TThanks for your insights as well . It was more a technical question regarding loads on the motor than how much would be realistic. I'm usually around 40-45% for helicopters with hydraulics and a bit more for helicopters without...
. It was more a technical question regarding loads on the motor than how much would be realistic. I'm usually around 40-45% for helicopters with hydraulics and a bit more for helicopters without...Selectrically, the motors only pull amps and make heat when youre pushing it away from its center. if you have everything cranked at 100% and you dont push on it, it wont warm up.
TThat's the info I needed to make me feel comfortable
Xthe thing that i love about this community, there are real people, who used real aircraft and they can tell how that really feels. You can't find this in any other community out there. Every time i check someone's profile, it's some retired pilot of real aircraft. 
TYeah, the flight simming community in general and this "technically" focussed community particularly are awesome, I agree 
.
I'm not a licensed helicopter pilot, but I treat myself with RL helicopter lessons every now and then. So at least I know, which feeling I wanna reproduce with the Rhino, my problem is more the "how to get there"
...
.I'm not a licensed helicopter pilot, but I treat myself with RL helicopter lessons every now and then. So at least I know, which feeling I wanna reproduce with the Rhino, my problem is more the "how to get there"
...Xglad it's not like iRacing, when fictional 14yo decide what's real on race car they never drove and when "pros" are video game "pros" and did not handled actual car in that conditions ever )))
Xi have not much FS exp (learning), but from simracing community, it was like breath of fresh air. People who never been in show drift in real car tells about how it feels when ABS kicks in... when IRL it kicks in, you pray the hell out it to work and steer b/c life depends on it ) maybe i exaturate, but it's night and day between Racing vs Flight community
XI just need a topic to spin out, please ignore me )
TI've never been on an iRacing Discord, but I can imagine. I've seen a guy reviewing a MSFS2020 helicopter, flying it with a Cessna yoke and stating, that the helicopter is not simulated realistically . He was older than 14, though ...
. He was older than 14, though ...Xnot all heros wear capes )))
XI've got nice wheels and nice wheelbase for simracing, but it doesn't have this feeling for some reason. I don't know it's either due to thing being self made or due to it's aircraft.
Every time i touch flight controller (F18 TM grip) i feel like there is weight behind it, as i almost lift up my right with it. I do not get same feeling with race gear (wheel/base)
Maybe it's mental thing, but i feel the weight of aircraft throughtout the stick
Every time i touch flight controller (F18 TM grip) i feel like there is weight behind it, as i almost lift up my right with it. I do not get same feeling with race gear (wheel/base)
Maybe it's mental thing, but i feel the weight of aircraft throughtout the stick
Xi guess i've just put not enough knots into sim yet, compared to seasoned people and real pilots (i got more than few K hours into simracing, that feeling fade away), but i hope this feeling of controlling actual machine will still be there
Xdriving a car is more or less common, you can get it outside just by driving (actively or not), but aircraft, it's different beast, as if you touch some forbiddent territory of something you will never experience
Xand these people say i'm crazy walking at house in OMP racing shoes ))))
Myou can get an "introduction" flight at every aeroclub, where you will be flown in a training plane (think small cessnas) and will get to pilot it for a bit when in the air. If you want to just experience it. An actual license is very expensive because of the flight hours you have to make
TA discovery flight costs $100-$200USD and is well worth it for the experience.
TTack on a zero and you can even fly in warbirds and jets haha.
FWith helicopters in-between
TThe problem with sim racing is that the settings etc…that make it more immersive in regards to IRL experience don’t make you faster in game. There, to be faster, you need different settings. So you have to choose between being fast in game or closer to IRL.
And yes almost nobody in these sim racing forums and discord hase any valuable experience with race cars. And sorry track days are not real racing experience with a race car. Some RL racers do obviously a good business w/ sim racing making Youtibe videos and selling AE gloves etc…
And yes almost nobody in these sim racing forums and discord hase any valuable experience with race cars. And sorry track days are not real racing experience with a race car. Some RL racers do obviously a good business w/ sim racing making Youtibe videos and selling AE gloves etc…
V:package: 
RHINO #0883 Has Shipped!
RHINO #0883 Has Shipped!V:package: 
RHINO #0884 Has Shipped!
RHINO #0884 Has Shipped!