WYouTubeWarhorse Studios
"War is a nasty business."
Pre-order now: https://bit.ly/PreorderKCD2
Experience the chaos, brutality and intrigue of the realistic world of the late Middle Ages.
Henry, a young man seeking justice for his murdered parents, embarks on an epic adventure where his conscience, morality and integrity are put to the ultimate test.
As blood feuds...
Pre-order now: https://bit.ly/PreorderKCD2
Experience the chaos, brutality and intrigue of the realistic world of the late Middle Ages.
Henry, a young man seeking justice for his murdered parents, embarks on an epic adventure where his conscience, morality and integrity are put to the ultimate test.
As blood feuds...
V:package: 
RHINO #0888 Has Shipped!
RHINO #0888 Has Shipped!
SWoow, thencan i let down the anxiety that my girlfriend will brake it 
VNot really my game, I hear it is good though, my desk is pretty full now.
VFinally! Thank you.
AHis name colour has changed!
BToo engrossed in POE2 ATM thank you 
considering I am retired I still don't have time 
considering I am retired I still don't have time VArrive by 11th not too bad giving what the gorram BREXIT has given us
VNot yet
A
AObv though you won’t be a full member until you’ve had a “whack! Fuck!” accident with it
VThanks for the tips and will to avoid that.
VThank goodness mine is not the Beast...
Mi just checked
Mthere was no notification on #666 being sent
Mit was skipped
VI mean FFBeast
![FuturPaladin [FR/2A]☨](https://cdn.discordapp.com/avatars/408735665916870657/1d7f7fb0842510dda4e1f46eeb26285e.webp?size=40)
Fis there a way to set when the button press is registered with an axis ? (brake axis button is pressed too early in this case)
FIs there a way to increase the strength of the Endstops? I have mine enabled at 100% already and I barely notice when I hit the stop.
OArrived USA!
Ris that mini stick able to be swapped for a different module? What about the thumb button?
TIf you have some tech parts coming from China or Hong Kong, this news is important for you:
https://www.cnn.com/2025/02/04/business/us-postal-service-suspends-parcels-china-intl-hnk/index.html
https://www.cnn.com/2025/02/04/business/us-postal-service-suspends-parcels-china-intl-hnk/index.html
CNN
The US Postal Service says it has suspended the acceptance of incoming international parcels from China and Hong Kong until further notice, threatening the business models of e-commerce giants Shein and Temu.
AYou remember correctly
AThe one way thumb button, and two two plus one way buttons can all be exchanged for four plus one way hats
SHm is there a way to use trim offset without breaking autopilots on planes without FFB support?
V:package: 
RHINO #0889 Has Shipped!
RHINO #0889 Has Shipped!COh shame. VPforceBot told me I passed my turn. I'm now nbr 890
V:package: 
RHINO #0890 Has Shipped!
RHINO #0890 Has Shipped!COuf ! That's it 
E891 tomorrow?
GHi. Is there anyone here who could accurately describe the FFB effects currently occurring in War Thunder on your device? I'm seriously considering buying it, but War Thunder is my main title and I play almost only this game, so the purchase would be dedicated specifically to this game. I would be grateful for a detailed description of the effects, in what situations they occur and whether there are any possibilities of modifying them and, if so, what. If someone could record a video showing how FFB effects work in War Thunder and post it here, that would be perfect.
Three months ago I became the owner of the Moza AB9 device. As I was not very familiar with the nuances of these systems, I chose a compact and ready-to-use device at a relatively reasonable price with a short order fulfillment time. I currently regret my choice a bit because in War Thunder FFB is practically non-existent on this device. There are no real FFB force effects, just some random vibrations present that don't satisfy me and rather just hinder the gameplay. I don't know if it makes sense to wait for Moza to solve the problem, because since I have AB9, practically nothing has changed in this matter, contact with the support department is practically non-existent, the answers provided are not at all related to the questions asked. So I'm seriously considering changing my device, but I'd like to make sure I'll have some use for it in War Thunder.
Three months ago I became the owner of the Moza AB9 device. As I was not very familiar with the nuances of these systems, I chose a compact and ready-to-use device at a relatively reasonable price with a short order fulfillment time. I currently regret my choice a bit because in War Thunder FFB is practically non-existent on this device. There are no real FFB force effects, just some random vibrations present that don't satisfy me and rather just hinder the gameplay. I don't know if it makes sense to wait for Moza to solve the problem, because since I have AB9, practically nothing has changed in this matter, contact with the support department is practically non-existent, the answers provided are not at all related to the questions asked. So I'm seriously considering changing my device, but I'd like to make sure I'll have some use for it in War Thunder.
TMoza ripped off the open source code of the Rhino. So I suspect this is a War Thunder problem rather than a FFB base problem. I don’t know much about War Thunder and almost never see anyone talk about it here, so I am afraid you would experience the same effects on a Rhino.
GAlready as the owner of AB9, I have explored the topic and managed to find out more about this rather controversial issue.
I found some information here, but I need more details:
https://discord.com/channels/965234441511383080/968208383251460226/1310965302057762878
Maybe @walmis could comment more on this?
I found some information here, but I need more details:
https://discord.com/channels/965234441511383080/968208383251460226/1310965302057762878
Maybe @walmis could comment more on this?
BDoubt he will have anything to say about the AB9. You have a Moza device, go ask them about it.
WThe dynamic spring from WT works with the Rhino, before the patch it was limp and only static spring was available.
I'll have to fire up WT to check/remember what exact effects the spring provides. But from the top of my head there was the stiffening spring vs speed and when rolling to the sides the joystick would want to lean with the roll. The caveat is that WT FFB implementation is ancient and was probably targeted to MSFFB2.
I'll have to fire up WT to check/remember what exact effects the spring provides. But from the top of my head there was the stiffening spring vs speed and when rolling to the sides the joystick would want to lean with the roll. The caveat is that WT FFB implementation is ancient and was probably targeted to MSFFB2.
GThank you very much for your answer.
Two weeks ago I took the opportunity to buy an old, used Microsoft FFB2 joystick to test its performance in War Thunder. My main computer freezes when I try to run the game with MS FFB2 connected. It boots somehow on the laptop, but FFB doesn't work properly. There are additional vibration effects when shooting, and every few seconds the effect of a constant spring appears, only to disappear for a few seconds and so on. So another unhappy purchase, good thing it's not that expensive.
An interesting fact is that about a month ago, I simply turned on my computer in the morning and launched the game. To my surprise, when I trimmed the airplane in a test flight, I noticed that the stick moved as the trim settings changed and that the centering spring action was slightly different than usual. These effects were also felt on every other plane and despite the lack of vibration effects when using the weapons, flaps, landing gear and brakes, they were very satisfying and, in my opinion, sufficient. Moreover, in the hangar, the stick changed its position by itself when selecting individual machines placed in the crews. It worked fine for the whole day, i.e. for several hours, but the next day after restarting the computer, these effects were gone and only the hated, random vibration remained. Since then, I have been looking for a way to restore these effects, searching for information on the far corners of the Internet, writing to the support departments of both Gaijin and Moza, trying to modify and add entries to the system registry according to the instructions of Nutu Coman on the Microchip forum and all I managed to achieve was frustration. I noticed that the dynamic spring effect occurs after restarting the device in the middle of a game, but only for 5-6 seconds and then disappears every time. Is there any way to make these effects last longer? Is there any way to get these extra effects to work again like they did on that one lucky day a few weeks ago? Is the only solution for me to return this Moza equipment and buy a VP base?
Two weeks ago I took the opportunity to buy an old, used Microsoft FFB2 joystick to test its performance in War Thunder. My main computer freezes when I try to run the game with MS FFB2 connected. It boots somehow on the laptop, but FFB doesn't work properly. There are additional vibration effects when shooting, and every few seconds the effect of a constant spring appears, only to disappear for a few seconds and so on. So another unhappy purchase, good thing it's not that expensive.
An interesting fact is that about a month ago, I simply turned on my computer in the morning and launched the game. To my surprise, when I trimmed the airplane in a test flight, I noticed that the stick moved as the trim settings changed and that the centering spring action was slightly different than usual. These effects were also felt on every other plane and despite the lack of vibration effects when using the weapons, flaps, landing gear and brakes, they were very satisfying and, in my opinion, sufficient. Moreover, in the hangar, the stick changed its position by itself when selecting individual machines placed in the crews. It worked fine for the whole day, i.e. for several hours, but the next day after restarting the computer, these effects were gone and only the hated, random vibration remained. Since then, I have been looking for a way to restore these effects, searching for information on the far corners of the Internet, writing to the support departments of both Gaijin and Moza, trying to modify and add entries to the system registry according to the instructions of Nutu Coman on the Microchip forum and all I managed to achieve was frustration. I noticed that the dynamic spring effect occurs after restarting the device in the middle of a game, but only for 5-6 seconds and then disappears every time. Is there any way to make these effects last longer? Is there any way to get these extra effects to work again like they did on that one lucky day a few weeks ago? Is the only solution for me to return this Moza equipment and buy a VP base?
YI always find Moza weird, not only the copyright problem.
They seem don’t know what they are making, and don’t know how to advertise their product.
They seem don’t know what they are making, and don’t know how to advertise their product.
YIf it’s still possible to return and refund your ab9 I suggest you to do it, and try Rhino or other similar products like ffbeast. At least they actually made by great ppl who really know what they’re doing.
GThank you for your valuable comments. My choice was dictated by the ease of purchase, price and compact design, allowing it to be mounted to the desk top, next to the keyboard and mouse. I cannot afford to build the entire stand at the moment and I regret it very much because I really appreciate the passion, commitment, knowledge and experience of the people involved in creating such projects. Another obstacle is the language barrier, which could make it difficult to understand how to build it all, what parts need to be purchased and where it is best to do it. This whole situation makes me feel so discouraged that I don't even want to play (without FFB).
Aany word on flnkr grip support? apparently my grip arrives tomorrow
WWill push an update tomorrow 
Aawesome, thanks! how you liking the grip in general?
A(the 5 of us who have one will appreciate the update :KEK:)
FHonestly, you can definitely use a normal rhino with a desk mount. For a clear mind i would definitely add bottom supports if you do (extend the desk mount to contact the floor, through metal or (wooden) props) but it should work. If you have a wooden desk that is, wouldn't trust it with a cardboard one
FBut the forces between rhino and moza are basically the same
FAnd telemffb might also be the difference you're looking for, but I'm not sure how well that works with war thunder