I've noticed my base is getting a lot of "interference" it seems. it will randomly throw button pre

I've noticed my base is getting a lot of "interference" it seems. it will randomly throw button presses in and I'm not sure if it's the base/cable or what is going on. pedals arent doing it.

RUSHER•2/8/25, 6:31 AM

Calibrate all the axis of the grip itself and apply/store settings. @Jehly

JJehly I've noticed my base is getting a lot of "interference" it seems. it will rando...

walmis•2/8/25, 6:53 AM

Which grip?

RUSHER•2/8/25, 9:24 AM

I had the problem with the FLANKR Grip. Button presses of the mini stick end positions would randomly be activated. Calibrating the axis of the mini stick solved the problem.

TonyDarkZero•2/8/25, 9:27 AM

Hello, maybe a dumb question and I hope this is allowed, I noticed on the VPforce website that components are available separately. Do hobbyists buy for example the FFB Motherboard and then source their own parts ?

TTonyDarkZero Hello, maybe a dumb question and I hope this is allowed, I noticed on the VPforc...

walmis•2/8/25, 11:21 AM

Yes, you can buy motor kits to implement your own mechanics. The motherboard by itself is not very useful - it needs to be coupled with 1 or 2 motors (for pedals, joystick respectively)

TTonyDarkZero Hello, maybe a dumb question and I hope this is allowed, I noticed on the VPforc...

Fierce_Fire•2/8/25, 11:44 AM

FYI, the kit is board + motors, you cannot source your own motors

TonyDarkZero•2/8/25, 12:32 PM

@walmis @Fierce_Fire thanks for prompt reply, one last question please, I see there are STL. files available on Printables and GitHub (protomaker964 / Rhino-FFB-Clone-3D_Printed), are these useable or is there another source? Thanks

RRUSHER I had the problem with the FLANKR Grip. Button presses of the mini stick end pos...

JehlyOP•2/8/25, 12:42 PM

I’ll try it out!

TTonyDarkZero @walmis @Fierce_Fire thanks for prompt reply, one last question please, I see th...

Touch_Of_Legend•2/8/25, 1:31 PM

Most of the DIY Rhino’s you see come from the GitHub (protomaker but also gadroc has one)

NNumber481 New firmware + new configurator. Need both.

Reed•2/8/25, 3:27 PM

I did both and can’t see it

RReed I did both and can’t see it

Fr4Ged•2/8/25, 3:48 PM

JehlyOP•2/8/25, 4:27 PM

I also had a hard time seeing it. Only after I said something it popped out and I felt dumb

TTouch_Of_Legend Most of the DIY Rhino’s you see come from the GitHub (protomaker but also gadroc...

TonyDarkZero•2/8/25, 4:47 PM

Thanks I have a look, do you know if 57BLF03 motors are off the shelf or custom?

Thorngeist•2/8/25, 7:54 PM

Just got this thing set up with configurator and TelemFFB for the first time. Dumb question: does the stick not behave like a conventional spring base and want to go fully back to center if you stop pushing? I feel like I'm holding it in place in a large dead zone until there are g-forces to push me away.

Kat•2/8/25, 8:34 PM

I apologize if this isn't the right place for this sort of question, but is the Rhino's base heavy enough that I wouldn't need to bolt it in place with a 200mm stick extension? or must I plan to have some way to fasten it to the floor?

KKat I apologize if this isn't the right place for this sort of question, but is the ...

Fr4Ged•2/8/25, 8:39 PM

You'd at least need to weigh it down a lot more else it would tipple especially with the leverage of the extension

FFr4Ged Click to see attachment

Reed•2/8/25, 9:32 PM

Yup I don’t remember seeing that last night I’ll take another look.

Foxx•2/8/25, 10:42 PM

Woo just put my DIY kit request in

JehlyOP•2/8/25, 11:50 PM

Anyone know if it's possible to downgrade firmware?

Reed•2/9/25, 12:52 AM

I found it. the led. nice

TTonyDarkZero Thanks I have a look, do you know if 57BLF03 motors are off the shelf or custom?

Touch_Of_Legend•2/9/25, 2:23 AM

The motors have a special anti cogging code so you have to use the motors from VPforce with the kit.

wolfman59#6013•2/9/25, 9:49 AM

Can someone tell me this is correct for the VPforce configuration part, because I'm having a little trouble, and it's to use the Vpforce rhino for dcs?

wolfman59#6013•2/9/25, 9:49 AM

Fr4Ged•2/9/25, 10:52 AM

What is your issue with using it for DCS?

FFr4Ged What is your issue with using it for DCS?

wolfman59#6013•2/9/25, 11:19 AM

I have two indications in red at the bottom right, is this serious?

Wwolfman59#6013 I have two indications in red at the bottom right, is this serious?

Fr4Ged•2/9/25, 11:20 AM

Can you screenshot it?

FFr4Ged Can you screenshot it?

wolfman59#6013•2/9/25, 11:21 AM

ok I'll capture it right away

wolfman59#6013•2/9/25, 11:23 AM

rn_image_picker_lib_temp_2c974adc-700a-4630-92ac-a6f76613fe70.jpg

wolfman59#6013•2/9/25, 11:26 AM

TrigaNZ•2/9/25, 11:37 AM

You might have to slip your belts off so the centre value is more correct. Read the note about centre value.

TrigaNZ•2/9/25, 11:38 AM

The red number is your centre value.

TTrigaNZ The red number is your centre value.

wolfman59#6013•2/9/25, 11:39 AM

so I remove the belts and I continue the adjustments, is that it?

wolfman59#6013•2/9/25, 12:03 PM

Could someone tell me the procedure to follow to re-center my motors with respect to the belts, to have a better centering value?

Wwolfman59#6013 Could someone tell me the procedure to follow to re-center my motors with respec...

Number481•2/9/25, 12:41 PM

- remove belt
- manually set min/max to 0/4096, Apply
- enable spring, motor will center
- put belt back on with stick centered on axis
- Run auto calibration, apply, store

Center doesn't need to be exactly 2048... just need to be sure that the range of motion is within 0->4096

NNumber481 - remove belt - manually set min/max to 0/4096, Apply - enable spring, motor wil...

Reed•2/9/25, 1:39 PM

Would it be good to design or 3-D print a jig that keeps the stick dead center for this process is probably not needed but could be helpful almost like 2/2 squares like a coupling that slides into the plate or someone has a degree limiter installed.

Reed•2/9/25, 1:39 PM

It would almost be like printing, a 0° limiter so the stick doesn’t move at all if those are in place why you’re doing thiscenter reset

RReed Would it be good to design or 3-D print a jig that keeps the stick dead center f...