I don't dare to ask how exactly you are using it.....
I don't dare to ask how exactly you are using it.....
VWhich profile to use when flying Falcon BMS, it has very limited set of FFB reaction like too high load and missile firing
FThe F16 is a fly-by-wire aircraft which have little FFB in the first place, and then its also a force sensing stick which basically has no feedback. I assume there will be little you can do unless you make something with telemFFB
BThere are some basic effects, you can for example feel g's as you pull, with telemffb of course. And you can use a profile with significantly reduced throw range to make it feel real snappy.
VOh, sorry I was using the Rhino for F-15C which has its own avonics. I use the other base for side stick planes.
VSo, in my case, I can just manually load the DCS F-15C profile and use it as is, right?
AI’d leave it working as a normal stick
AReducing the range/throw of the stick really wouldn’t hold a candle to how a force sensing stick feels, regardless of ramping up resistance
AIt would just make for a strange feeling which likely wears on the internal mechanics quite a bit, and limits your manoeuvrability in game
![Damonjay[AusTac]](https://cdn.discordapp.com/avatars/136374833935024128/109947e65971f87d077a7a077b824e75.webp?size=40)
DRate my setup?
AModerator, I think that belongs in the suggestions section 
Heveryone gets the grip they deserve
DA possibility to break out of the flight sim niche. Open new markets
![Damonjay[AusTac]](https://cdn.discordapp.com/avatars/136374833935024128/109947e65971f87d077a7a077b824e75.webp?size=16)
TThose monitors don’t look lined up
Rany recommendations for how to best balance the forces now that I have a stick offset?
https://virpil-controls.eu/vpc-flightstick-z-extension.html
https://virpil-controls.eu/vpc-flightstick-z-extension.html
★ Designed for Space Sim Cockpits
★ "Z" Style Extension to Create your own Omni-Throttle
★ Premium All-Metal Construction
★ Adjustable Grip Angle
★ "Z" Style Extension to Create your own Omni-Throttle
★ Premium All-Metal Construction
★ Adjustable Grip Angle
RYouTubeRotor - Sims
In this video I show you how to balance your rhino spring to work properly for the H145 and H160
Ri wish i could centre the stick. let go and have the machine sense the force required to keep it centered
and therefore the new centre of gravity
and therefore the new centre of gravity
Rand then calibrate
Rthe adaptive centering thing doesn't seem that accurate
V:package: 
RHINO #0919 Has Shipped!
RHINO #0919 Has Shipped!V:package: RHINO #0920 Has Shipped!
RHINO #0920 Has Shipped!
TI haven’t watched the video but also play with static force. I do t use any balance spring and only use static force
BSame, with my z-extension and cm2 grip, only thing I've added is 6% static force on pitch.
VRight?
RDCS creates a profile for each iteration of controller, for each plane and cockpit postion. It will automatically use that profile whenever DCS detects that controller is active. You will want to save these profiles, one for each device\plane somewhere you can get to them. I use a folder inside of my saved games folder for this.
FHello, how could I go about ordering a 15 degree offset angle head for my TM A10 grip?
FMy grip is straight on and I’d like to readjust it so it’s more ergonomic…
BThere's an stl for that variant in the knowledge base channel, so you can print your own.
https://discord.com/channels/965234441511383080/1198547200058347670/1198547200058347670
https://discord.com/channels/965234441511383080/1198547200058347670/1198547200058347670
V:package: RHINO #0918 Has Shipped!
RHINO #0918 Has Shipped!
SHi there,
Coming back to DCS after a long break, flying warbirds only at the moment.
Does anybody have a good setting to get the stick stiffening with increasing airspeed ?
Thanks
Coming back to DCS after a long break, flying warbirds only at the moment.
Does anybody have a good setting to get the stick stiffening with increasing airspeed ?
Thanks
VSo, I just export the profile for, say DCS F-15C then. So, how can I import it when I need it in some other sim? Thanks again
WFC Technologies were kind enough to lend me their line of grips for testing and support for the next firmware revision 
In the photo - NS-37, EVO and FC-35 grips.
Gotta say, the build quality feels pretty nice.
In the photo - NS-37, EVO and FC-35 grips.
Gotta say, the build quality feels pretty nice.
V:package: 
RHINO #0921 Has Shipped!
RHINO #0921 Has Shipped!V:package: RHINO #0922 Has Shipped!
RHINO #0922 Has Shipped!
FWhat is up with Lithuania and flight simming? Two manufacturers + VPForce 
WYeah, even the director himself delivered the grips, since he was travelling to Klaipeda. But he seemed to be in a hurry and didn't stay for a coffee
M@walmis have you gotten you’re hands on the new Virpil FlNKR grip or do you need a sample for updating the firmware?
WFLNKR update is already rolled out
MAwesome!
RButton mapping is specific to each sim since the commands aren’t standardized. But, among the different DCS aircraft you can load a similar set up as a template.
BThose look nice, and surprisingly affordable.
BEspecially as they are half off for February.
RExcited to see these guys building good stuff.
AStill very skeptical of them since the pirate copies they started with and pretended to backpedal from tbh
BAh, thought this was a new company. Shouldn't be to difficult to get working on the rhino then
TI'm also wondering this. Does the default TelemFFB handle this?
XHey, just heared in DCS Discord that DCS doesn't support multiple FFB devices, i know many here do use lots of FFB devices and play DCS, so i wonder if it's true or not really ?
Xi think i got answer ) ignore above )
SNo idea, I don't think so
@walmis @Number481
@walmis @Number481
HPaul at QR4Rigs doing some custom 3D printed pulley covers with the 1st Air Cavelry badge on it.
VAlright.
