Dishonored crash when someone is killed

uncertain-scarlet · 2025-06-15T12:47:24.889Z

Whenever I kill any of the first enemies, the game crashes. I somehow got around that by turning on cloud sync but then it crashed again after they killed the empress. The screenshot is from when I kill an enemy but the error is similar when the empress is killed. After downloading the game for the first time it worked just fine and I was able to get quite far into it. However I think it was after adding it to steam that it began to crash like this. I've removed it from steam since but the crashing persists.

D

dry-scarlet•6/15/25, 1:17 PM

Pacifist gameplay it is then

D

dry-scarlet•6/15/25, 1:19 PM

IMPORTANT: Logs are disabled.
Enable verbose logs in Game's settings > Advanced tab > 'Enable verbose logs' before reporting an issue.

IMPORTANT: Logs are disabled.
Enable verbose logs in Game's settings > Advanced tab > 'Enable verbose logs' before reporting an issue.

D

dry-scarlet•6/15/25, 1:19 PM

Read the log before posting

Ddry-scarlet Read the log before posting

U

uncertain-scarletOP•6/15/25, 1:31 PM

Right my bad, I had read the logs before but turned them off since and forgot. Here's the complete one

d2da64bd4c4e422da4b1a88041492a3a-lastPlay.log411.09KB

C

CommandMC•6/15/25, 1:35 PM

    "enviromentOptions": [
        {
            "key": "UMU_NO_RUNTIME",
            "value": "1"
        },
        {
            "key": "WINE_WMCLASS",
            "value": "\"<name>\""
        },
        {
            "key": "WINEUSERSANDBOX",
            "value": "1"
        },
        {
            "key": "WINE_NO_WM_DECORATION",
            "value": "1"
        },
        {
            "key": "WINE_PREFER_SDL_INPUT",
            "value": "1"
        },
        {
            "key": "PROTON_USE_WINED3D",
            "value": "1 %command%"
        }
    ],

    "enviromentOptions": [
        {
            "key": "UMU_NO_RUNTIME",
            "value": "1"
        },
        {
            "key": "WINE_WMCLASS",
            "value": "\"<name>\""
        },
        {
            "key": "WINEUSERSANDBOX",
            "value": "1"
        },
        {
            "key": "WINE_NO_WM_DECORATION",
            "value": "1"
        },
        {
            "key": "WINE_PREFER_SDL_INPUT",
            "value": "1"
        },
        {
            "key": "PROTON_USE_WINED3D",
            "value": "1 %command%"
        }
    ],

    "enviromentOptions": [
        {
            "key": "UMU_NO_RUNTIME",
            "value": "1"
        },
        {
            "key": "WINE_WMCLASS",
            "value": "\"<name>\""
        },
        {
            "key": "WINEUSERSANDBOX",
            "value": "1"
        },
        {
            "key": "WINE_NO_WM_DECORATION",
            "value": "1"
        },
        {
            "key": "WINE_PREFER_SDL_INPUT",
            "value": "1"
        },
        {
            "key": "PROTON_USE_WINED3D",
            "value": "1 %command%"
        }
    ],

    "enviromentOptions": [
        {
            "key": "UMU_NO_RUNTIME",
            "value": "1"
        },
        {
            "key": "WINE_WMCLASS",
            "value": "\"<name>\""
        },
        {
            "key": "WINEUSERSANDBOX",
            "value": "1"
        },
        {
            "key": "WINE_NO_WM_DECORATION",
            "value": "1"
        },
        {
            "key": "WINE_PREFER_SDL_INPUT",
            "value": "1"
        },
        {
            "key": "PROTON_USE_WINED3D",
            "value": "1 %command%"
        }
    ],

Remove all of those

D

dry-scarlet•6/15/25, 1:36 PM

His gt 630

D

dry-scarlet•6/15/25, 1:37 PM

Likely the reason for passing wined3d one

C

CommandMC•6/15/25, 1:37 PM

Oh yup, that sure is a Fermi GPU

D

dry-scarlet•6/15/25, 1:37 PM

https://github.com/pythonlover02/Proton-Sarek/releases/tag/Proton-Sarek10-4

GitHub

Release Proton-Sarek10-4 Released · pythonlover02/Proton-Sarek

Stable Build:
Took me quite some time to make this release as i was moving to a new house. Here are the changes:

add the GE-Proton10-4 changes to the proton file
use GE-Proton10-4 as the base inst...

D

dry-scarlet•6/15/25, 1:37 PM

Remove all env vars

D

dry-scarlet•6/15/25, 1:37 PM

Use this proton build, async one

U

uncertain-scarletOP•6/15/25, 1:38 PM

Alright I'll try to figure it out

U

uncertain-scarletOP•6/15/25, 1:38 PM

I don't remember seeing that proton version on protonqt so I'm not sure how I'll need to download it

D

dry-scarlet•6/15/25, 1:39 PM

.config/heroic/tools

Iirc, that is where you need to put it

Cchůbshøbe I don't remember seeing that proton version on protonqt so I'm not sure how I'll...

C

CommandMC•6/15/25, 1:39 PM

https://github.com/pythonlover02/Proton-Sarek?tab=readme-ov-file#native

D

dry-scarlet•6/15/25, 1:39 PM

@CommandMC is this the correct path?

""Leopard"@CommandMC is this the correct path?

C

CommandMC•6/15/25, 1:39 PM

~/.config/heroic/tools/proton

~/.config/heroic/tools/proton

, yes

D

dry-scarlet•6/15/25, 1:40 PM

Ah ye, tho putting to steam path would be more beneficial in the end

D

dry-scarlet•6/15/25, 1:40 PM

Since he could use in Steam too that way

D

dry-scarlet•6/15/25, 1:40 PM

Didnt think about that

D

dry-scarlet•6/15/25, 1:49 PM

Damn, it is Fermi; for some reason i thought it would be Kepler

D

dry-scarlet•6/15/25, 1:49 PM

D

dry-scarlet•6/15/25, 1:49 PM

Even Proton Sarek wouldnt save you fwiw

D

dry-scarlet•6/15/25, 1:50 PM

Aka you would still need to use wined3d

D

dry-scarlet•6/15/25, 1:50 PM

For such setups i recommend Windows as a better outcome

D

dry-scarlet•6/15/25, 1:50 PM

No Vulkan support= Very limited gaming on Linux

D

dry-scarlet•6/15/25, 1:51 PM

Actually, maybe not Fermi

D

dry-scarlet•6/15/25, 1:51 PM

@chůbshøbe

inxi -SMGxx

inxi -SMGxx

U

uncertain-scarletOP•6/15/25, 1:51 PM

what's wrong with wined3d in this instance though?

D

dry-scarlet•6/15/25, 1:51 PM

Can you post this from terminal?

U

uncertain-scarletOP•6/15/25, 1:52 PM

and yes it is a fermi card

U

uncertain-scarletOP•6/15/25, 1:52 PM

System:
  Host: cachyos-x8664 Kernel: 6.14.6-1-cachyos arch: x86_64 bits: 64
    compiler: clang v: 19.1.7
  Desktop: LXQt v: 2.2.1 tk: Qt v: 6.9.0 wm: Openbox dm: LightDM
    Distro: CachyOS base: Arch Linux
Machine:
  Type: Desktop Mobo: JW . model: JW-IG31-MKII v: V1.0
    serial: <superuser required> BIOS: American Megatrends v: 080015
    date: 03/12/2009
Graphics:
  Device-1: NVIDIA GF108 [GeForce GT 630] vendor: Micro-Star MSI
    driver: nvidia v: 390.157 arch: Fermi pcie: speed: 2.5 GT/s lanes: 16 ports:
    active: none off: VGA-1 empty: DVI-I-1,HDMI-A-1 bus-ID: 01:00.0
    chip-ID: 10de:0f00
  Display: x11 server: X.Org v: 21.1.16 driver: X: loaded: nvidia
    unloaded: modesetting alternate: fbdev,nouveau,nv,vesa gpu: nvidia
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1600x900 s-dpi: 94
  Monitor-1: VGA-1 mapped: VGA-0 note: disabled model: AOC 2070W
    res: 1600x900 hz: 60 dpi: 94 diag: 494mm (19.4")
  API: EGL v: 1.5 platforms: gbm: drv: kms_swrast
  API: OpenGL v: 4.5 compat-v: 4.6.0 vendor: nvidia mesa v: 390.157
    glx-v: 1.4 direct-render: yes renderer: GeForce GT 630/PCIe/SSE2
  API: Vulkan Message: No Vulkan data available.
  Info: Tools: api: eglinfo, glxinfo, vulkaninfo de: kscreen-doctor
    gpu: nvidia-settings,nvidia-smi x11: xdpyinfo, xprop, xrandr

System:
  Host: cachyos-x8664 Kernel: 6.14.6-1-cachyos arch: x86_64 bits: 64
    compiler: clang v: 19.1.7
  Desktop: LXQt v: 2.2.1 tk: Qt v: 6.9.0 wm: Openbox dm: LightDM
    Distro: CachyOS base: Arch Linux
Machine:
  Type: Desktop Mobo: JW . model: JW-IG31-MKII v: V1.0
    serial: <superuser required> BIOS: American Megatrends v: 080015
    date: 03/12/2009
Graphics:
  Device-1: NVIDIA GF108 [GeForce GT 630] vendor: Micro-Star MSI
    driver: nvidia v: 390.157 arch: Fermi pcie: speed: 2.5 GT/s lanes: 16 ports:
    active: none off: VGA-1 empty: DVI-I-1,HDMI-A-1 bus-ID: 01:00.0
    chip-ID: 10de:0f00
  Display: x11 server: X.Org v: 21.1.16 driver: X: loaded: nvidia
    unloaded: modesetting alternate: fbdev,nouveau,nv,vesa gpu: nvidia
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1600x900 s-dpi: 94
  Monitor-1: VGA-1 mapped: VGA-0 note: disabled model: AOC 2070W
    res: 1600x900 hz: 60 dpi: 94 diag: 494mm (19.4")
  API: EGL v: 1.5 platforms: gbm: drv: kms_swrast
  API: OpenGL v: 4.5 compat-v: 4.6.0 vendor: nvidia mesa v: 390.157
    glx-v: 1.4 direct-render: yes renderer: GeForce GT 630/PCIe/SSE2
  API: Vulkan Message: No Vulkan data available.
  Info: Tools: api: eglinfo, glxinfo, vulkaninfo de: kscreen-doctor
    gpu: nvidia-settings,nvidia-smi x11: xdpyinfo, xprop, xrandr

System:
  Host: cachyos-x8664 Kernel: 6.14.6-1-cachyos arch: x86_64 bits: 64
    compiler: clang v: 19.1.7
  Desktop: LXQt v: 2.2.1 tk: Qt v: 6.9.0 wm: Openbox dm: LightDM
    Distro: CachyOS base: Arch Linux
Machine:
  Type: Desktop Mobo: JW . model: JW-IG31-MKII v: V1.0
    serial: <superuser required> BIOS: American Megatrends v: 080015
    date: 03/12/2009
Graphics:
  Device-1: NVIDIA GF108 [GeForce GT 630] vendor: Micro-Star MSI
    driver: nvidia v: 390.157 arch: Fermi pcie: speed: 2.5 GT/s lanes: 16 ports:
    active: none off: VGA-1 empty: DVI-I-1,HDMI-A-1 bus-ID: 01:00.0
    chip-ID: 10de:0f00
  Display: x11 server: X.Org v: 21.1.16 driver: X: loaded: nvidia
    unloaded: modesetting alternate: fbdev,nouveau,nv,vesa gpu: nvidia
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1600x900 s-dpi: 94
  Monitor-1: VGA-1 mapped: VGA-0 note: disabled model: AOC 2070W
    res: 1600x900 hz: 60 dpi: 94 diag: 494mm (19.4")
  API: EGL v: 1.5 platforms: gbm: drv: kms_swrast
  API: OpenGL v: 4.5 compat-v: 4.6.0 vendor: nvidia mesa v: 390.157
    glx-v: 1.4 direct-render: yes renderer: GeForce GT 630/PCIe/SSE2
  API: Vulkan Message: No Vulkan data available.
  Info: Tools: api: eglinfo, glxinfo, vulkaninfo de: kscreen-doctor
    gpu: nvidia-settings,nvidia-smi x11: xdpyinfo, xprop, xrandr

System:
  Host: cachyos-x8664 Kernel: 6.14.6-1-cachyos arch: x86_64 bits: 64
    compiler: clang v: 19.1.7
  Desktop: LXQt v: 2.2.1 tk: Qt v: 6.9.0 wm: Openbox dm: LightDM
    Distro: CachyOS base: Arch Linux
Machine:
  Type: Desktop Mobo: JW . model: JW-IG31-MKII v: V1.0
    serial: <superuser required> BIOS: American Megatrends v: 080015
    date: 03/12/2009
Graphics:
  Device-1: NVIDIA GF108 [GeForce GT 630] vendor: Micro-Star MSI
    driver: nvidia v: 390.157 arch: Fermi pcie: speed: 2.5 GT/s lanes: 16 ports:
    active: none off: VGA-1 empty: DVI-I-1,HDMI-A-1 bus-ID: 01:00.0
    chip-ID: 10de:0f00
  Display: x11 server: X.Org v: 21.1.16 driver: X: loaded: nvidia
    unloaded: modesetting alternate: fbdev,nouveau,nv,vesa gpu: nvidia
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1600x900 s-dpi: 94
  Monitor-1: VGA-1 mapped: VGA-0 note: disabled model: AOC 2070W
    res: 1600x900 hz: 60 dpi: 94 diag: 494mm (19.4")
  API: EGL v: 1.5 platforms: gbm: drv: kms_swrast
  API: OpenGL v: 4.5 compat-v: 4.6.0 vendor: nvidia mesa v: 390.157
    glx-v: 1.4 direct-render: yes renderer: GeForce GT 630/PCIe/SSE2
  API: Vulkan Message: No Vulkan data available.
  Info: Tools: api: eglinfo, glxinfo, vulkaninfo de: kscreen-doctor
    gpu: nvidia-settings,nvidia-smi x11: xdpyinfo, xprop, xrandr

D

dry-scarlet•6/15/25, 1:53 PM

Rip

D

dry-scarlet•6/15/25, 1:53 PM

01bc:fixme:d3d_shader:print_glsl_info_log     0(25) : warning C7050: "vs_out[11]" might be used before being initialized

01bc:fixme:d3d_shader:print_glsl_info_log     0(25) : warning C7050: "vs_out[11]" might be used before being initialized

Tons of vertex shader related warns before crash

D

dry-scarlet•6/15/25, 1:54 PM

Which that game is a known working title but with dxvk

U

uncertain-scarletOP•6/15/25, 1:59 PM

it doesn't make sense how before it would crash on once the enemies died now it crashes when the empress dies

U

uncertain-scarletOP•6/15/25, 1:59 PM

if it was the shaders it would've kept crashing at the same place

Uuncertain-scarlet if it was the shaders it would've kept crashing at the same place

D

dry-scarlet•6/15/25, 2:06 PM

Easy way to test if you are not convinced but it will be slow

D

dry-scarlet•6/15/25, 2:06 PM

So do it if you only have a quick way to kill someone when you load the game

D

dry-scarlet•6/15/25, 2:06 PM

Load game with lavapipe

D

dry-scarlet•6/15/25, 2:06 PM

Aka cpu based rendering via Vulkan

D

dry-scarlet•6/15/25, 2:07 PM

That way you can use dxvk and see if crash was wined3d related or not

U

uncertain-scarletOP•6/15/25, 2:07 PM

how would i load the game with lavapipe? Conveniently the save game starts me right at the crash so

D

dry-scarlet•6/15/25, 2:08 PM

https://archlinux.org/packages/multilib/x86_64/lib32-vulkan-swrast/

https://archlinux.org/packages/extra/x86_64/vulkan-swrast/

D

dry-scarlet•6/15/25, 2:08 PM

Install these if you dont have em

D

dry-scarlet•6/15/25, 2:10 PM

VK_DRIVER_FILES=usr/share/vulkan/icd.d/lvp_icd.x86_64.json

VK_DRIVER_FILES=usr/share/vulkan/icd.d/lvp_icd.x86_64.json

D

dry-scarlet•6/15/25, 2:10 PM

Pcgw says game is 64 bit on EGS

D

dry-scarlet•6/15/25, 2:11 PM

If 32 bit

usr/share/vulkan/icd.d/lvp_icd.i686.json

usr/share/vulkan/icd.d/lvp_icd.i686.json

D

dry-scarlet•6/15/25, 2:11 PM

Additionally add

DXVK_HUD=1

DXVK_HUD=1

to see if it runs with dxvk that way

Dishonored crash when someone is killed

Similar Threads

Similar Threads

Similar Threads