Cloudflare Developers•5mo ago

Tail Workers do _not_ cost a request, only CPU which if you're just sending off elsewhere will be ba

Tail Workers do not cost a request, only CPU which if you're just sending off elsewhere will be basically 0 ms

WalshyOP•7/28/25, 7:57 PM

So it should be extremely cheap

WWalshy Tail Workers do _not_ cost a request, only CPU which if you're just sending off ...

Vlad Lykhonis•7/28/25, 7:59 PM

Makes sense. Since most of it will be io indeed. This will also scale later for me as we will add observability features. Thank you!

WWalshy Your best bet would be a tail Worker

Vlad Lykhonis•7/28/25, 8:20 PM

Would you have some pointers on how to get CPU time? I will test out events received tomorrow.

WalshyOP•7/28/25, 8:36 PM

When you get your event, it should have a

cpuTime

cpuTime

and

wallTime

wallTime

yourfinance.guy•8/2/25, 10:47 PM

@Walshy | DevPlat EE Hey its Justin with Evafi they said to contact you in here we are really inneed of technical support liek promised

Samko•8/6/25, 7:44 AM

Hello, I have got this email after canceling "Workers for Platforms" but we still have "Workers" active - It's very hard to understand why we got this email will our services work after 19th?

Rafflesia•8/8/25, 8:20 PM

hey! How would I let a user owned domain link to their worker in our dispatch namespace

deleted_user_3434563•8/11/25, 2:10 AM

How well does python run on workers? What are the limitations?

hype•8/11/25, 7:36 AM

How quick is it to deploy a user worker with a couple of dependencies? Is there a way to speed it up?

David•8/16/25, 6:23 AM

Hello i have a question, why did i get ban from wplace?

DDavid Hello i have a question, why did i get ban from wplace?

Hello, I’m Allie!•8/16/25, 6:48 AM

?blocked

SuperHelpflare•8/16/25, 6:48 AM

If you are blocked by a website that uses Cloudflare, you need to contact the website owner to appeal or investigate the block. Cloudflare is configured by the site owner, and Cloudflare will not overwrite the configuration of any customer. Nobody in this Discord nor any Cloudflare employee will be able to help you. The site owner can investigate why you were blocked through your Ray ID (usually found at the bottom of the blocked page).

HHello, I’m Allie!?blocked

David•8/16/25, 6:55 AM

Its all fine thx for the answer ! Ive got a ban message but its all good now

SuperHelpflare•8/17/25, 1:07 PM

Please do not post your question in multiple channels/post it multiple times per the rules at #

welcome-and-rules. It creates confusion for people trying to help you and doesn't get your issue or question solved any faster.

SoBeASH (🥃,🦉, 🔮,🗝)•8/18/25, 6:22 PM

gm - is there a way to move a WfP namespace and everythign in it to another account? I hit the 500 worker limit on my account and then realized I should move to WfP... and then realized that I should really have multiple accounts with WfP in the other account, lol.

Talles•8/19/25, 12:10 AM

guys , can a worker run a linux executable like "./program" ??

TTalles guys , can a worker run a linux executable like "./program" ??

Isaac McFadyen•8/19/25, 1:47 AM

No it cannot.

Isaac McFadyen•8/19/25, 1:47 AM

Workers runs in the V8 sandbox (same one used by Chrome) so it's limited to JS/WASM, or languages that can compile to JS/WASM like Typescript, Rust, etc.

WalshyOP•8/19/25, 1:47 AM

I mean, could in Containers now

WWalshy I mean, could in Containers now

Isaac McFadyen•8/19/25, 1:48 AM

Oh yeah true!

Isaac McFadyen•8/19/25, 1:48 AM

But it wouldn't strictly be in a Worker, it would be in a container that runs alongside the Worker (not the same level of scale etc), so you'd need to keep that in mind when planning out an application.

Talles•8/19/25, 1:58 AM

@Isaac McFadyen how can I have a proxy on cloudflare?

theo•8/19/25, 7:14 PM

Hi there - I'm looking for a good solution to run some code on behalf of my customers, in such a way that I cannot access their secrets. I actually control all the code, although in the future having client uploaded code might be helpful.

The big issue is I don't want to be able to access their secrets, and ideally I wouldn't be able to arbitrarily update the code which could then let me exfiltrate the secrets. Obviously I'll still want to be able to update the worker code, or deploy a new worker and re-bind the secret, but only with the customer's approval.

Seems like workers for platforms is fairly close to being able to do what I want, but not quite there.

Any ideas on how I can accomplish this?

Ttheo Hi there - I'm looking for a good solution to run some code on behalf of my cust...

Hard@Work•8/19/25, 7:26 PM

Would it work if the account it was deployed to was owned by the Customer?

Hard@Work•8/19/25, 7:27 PM

That's the only thing I can think of. WfP could be an option, but there is no way to lock deploys to be "at your customer's" approval, at least not baked in in a way that you wouldn't be able to change it yourself

HHard@Work Would it work if the account it was deployed to was owned by the Customer?

theo•8/19/25, 8:32 PM

Ideally not. Not all our customers will be necessarily be running on cloudflare, and that would add quite a bit of friction to getting things started.

theo•8/19/25, 8:34 PM

In the past I had posted an idea about a concept of something like a self-managed worker. Where there is some code running within the worker which returns a token, required to update that worker code. So basically you could implement whatever logic you need (some kind of auth, proof of ownership / etc) that gates the update.

We'd still have our users take some manual action to opt into the latest version of our software, which would be available for them to audit and review.

Ttheo In the past I had posted an idea about a concept of something like a self-manage...

Hard@Work•8/19/25, 8:46 PM

I'm not sure I follow your idea there?

You can set it up so that deployments only happen once your system has registered user consent, but there is no way to lock it on the Cloudflare side to prevent you from deploying anyway(at least, not that I'm aware of)

theo•8/19/25, 8:50 PM

Yeah it would have to be something new on the cloudflare side. A way of saying - this worker opts into self-managed updates.
Then CF would have to lock redeploying new code to that worker without some condition being met, likely passing in some kind of token that I as the platform operator dont have access to, but that my users do.

theo•8/19/25, 8:52 PM

If a secret is bound to that worker on creation and never recorded, then you'd have the ability to isolate access from the platform.

LrGian•9/2/25, 3:20 PM

Hello, has anyone in their development process, in their local environment, used a single local d1 for several workers since each worker within .wrangler creates its own d1

rohanbojja•9/2/25, 3:36 PM

Hello, what’s the recommended way to deploy a worker to a dispatch namespace? I noticed the REST endpoint allows uploading scripts, but our use case involves deploying full-stack apps (React + Vite + Hono). Currently, we use Wrangler in our pipeline, would it be possible to achieve the same via the API?

WalshyOP•9/2/25, 3:41 PM

Yep, you can just do what Wrangler does. The API is the same between Workers & Workers for Platforms, no limitations on what you can upload

You can also use wrangler by specifying

--dispatch-namespace

--dispatch-namespace

wrangler deploy

wrangler deploy

WalshyOP•9/2/25, 3:42 PM

Without Wrangler, you'd want to likely bundle the server side and upload that. For Assets, upload those with the upload API (https://developers.cloudflare.com/workers/static-assets/direct-upload/)

Tamada•9/8/25, 6:27 AM

Hello, is there someone who can help me in a workers that is using Workers for platform? when I started the worker, the message below is showing? please note that app-sandbox-proxy is also running locally.

wrangler 4.20.5
node: v20.19.1

env.DISPATCH_NAMESPACE          Dispatch Namespace      not supported
  app-sandbox-namespace (outbound -> app-sandbox-proxy)

env.DISPATCH_NAMESPACE          Dispatch Namespace      not supported
  app-sandbox-namespace (outbound -> app-sandbox-proxy)

liusha.bnb•9/12/25, 6:31 AM

@Walshy | DevPlat EE hi bro, i'm building a product based on worker for platform, i uploaded several project's static assets as user worker, my question is does these static assets requests counted into billing or not, because i can see dispatch worker logs these static assets requests

Leo•9/12/25, 11:47 AM

There are high packet losses and ping issues on the Germany Telekom line. Is there a solution to this problem?

Lliusha.bnb @Walshy | DevPlat EE hi bro, i'm building a product based on worker for platform...

Isaac McFadyen•9/12/25, 2:56 PM

?pings

SuperHelpflare•9/12/25, 2:56 PM

Please do not ping community members for non-moderation reasons. Doing so will not solve your issue faster and will make people less likely to want to help you.

Leo•9/12/25, 6:46 PM

The domains of Cloudflare Workers are now experiencing packet loss by most ISPs.

LLeo The domains of Cloudflare Workers are now experiencing packet loss by most ISPs.

Peps•9/12/25, 6:55 PM

which ISPs and against which domain?

Leo•9/12/25, 6:56 PM

https://bazid1.phy6.workers.dev/

Peps•9/12/25, 6:56 PM

If it's just/mainly Telekom, then that's an issue on their side, as they refuse to peer with Cloudflare, causing traffic to get rerouted signifcantly

Leo•9/12/25, 6:56 PM

https://ipinfo.io/AS3320

AS3320 Deutsche Telekom AG details - IPinfo.io

AS3320 autonomous system information: WHOIS details, hosted domains, peers, upstreams, downstreams, and more

Peps•9/12/25, 6:57 PM

long time issues specifically with Telekom, see https://www.google.com/search?q=cloudflare+telekom

www.google.com

🔎 cloudflare telekom - Google Search

Leo•9/12/25, 6:58 PM

Isn't there a solution for this? It seems there’s no problem on Pages.dev, but there is an issue on Workers.dev

LLeo Isn't there a solution for this? It seems there’s no problem on Pages.dev, but t...

Chaika•9/12/25, 7:00 PM

Pages.dev gets enterprise-like inbound routing where workers.dev gets free plan like inbound routing. Upgrading the plan improves routing where it's expensive to Cloudflare/capacity/etc

CChaika Pages.dev gets enterprise-like inbound routing where workers.dev gets free plan ...

Leo•9/12/25, 7:01 PM

Guess it’s time to dump my Cloudflare stock

Leo•9/12/25, 7:05 PM

Do you have any suggestions for me? Maybe another provider or a different approach? Actually, I was using it as a reverse proxy for my code. Since domains keep getting blocked in my country for political reasons, I used to simply change the domain name on Workers and get a fresh one each time — it worked really well. That way I never had to buy a domain. But now I ran into issues on the Germany side. It used to be a low-cost and elegant solution.

Tail Workers do _not_ cost a request, only CPU which if you're just sending off elsewhere will be ba

Similar Threads