Will you be making a website where we can buy it in a later stage?
Will you be making a website where we can buy it in a later stage?
WYup! It's in progress
M@walmis thnx, I'm building a full p-51d cockpit and I'm thinking about integrating a rhino into it. Could you tell me how high the base is?
WSure, one sec, I'll share the drawing
MThnx. The rhino is the only ffb base that works with the direct input drivers. It might fill a gap in the market. Could be big. Keep it up
WThanks!
S@walmis Do you have any plans for the motors fit to a collective? Is that possible?
WIt's possible with the existing system no problem.
WJust the proper mechanics are necessary
SHave you tried that ?
WI'll try with a rhino sideways later 
Wbut for a proper collective a bit of counterweight would be beneficial, as to not waste power counterabalancing it constantly
Si wanted to avoid that but i know what you mean
BMy motor kit arrived, thanks a lot. It'll be a while before I do any tests or experiments though, I have to check out the sim and then the real aircraft before I make any decisions
WAwesome. Keep us posted 
BI really need some engineering drawings of a Spitfire yoke. I've got a comprehensive book that contains blueprints of the entire MKIX but they are more focussed on the airframe. When I do the simulator session I'll ask the guys there how they acquired their blueprints ( I'm assuming they use a Brunner system, it definitely has FFB or it wouldn't be CAA approved for training )
I will make 'puppy dog eyes' at them until I get the drawings I need
I will make 'puppy dog eyes' at them until I get the drawings I need
MHave you checked out the authentikit controls ? https://authentikit.org/ and these guys https://heritageflightsim.com/home/hfs-spitfire-mkix-cockpit-plans/
HCheck out this cad too. https://grabcad.com/library/control-column-spade-grip-supermarine-spitfire-2018-carbon-1
The GrabCAD Library offers millions of free CAD designs, CAD files, and 3D models. Join the GrabCAD Community today to gain access and download!
HI've used a combo of the AK design and that cad to build a spit ffb stick
HTesting this weekend
BAuthentikit is a marvellous project, can't praise them enough. But I'm looking at a 1:1 cockpit build, and they have a modified stick design that makes sense for the 99% of people who need something a bit less single minded
MThen the heritage project should give you that 1:1
BThat looks really interesting
BI'm not making any decisions until I've had a session in the simulator and flown a real MK IX though, which will be this month
MSounds awesome, will really give you something to base that elusive feel from, nothing like first hand comparison.
BIt's going to be eye wateringly expensive but it will be a real experience. To be honest it's the availability of a flight in the real plane that's driving my decision to build the Spitfire cockpit. I love the Spitfire, because what Englishman doesn't ? but I'd like an EE Lightning a little better. But there's no prospect of high fidelity simulator software for that and no way to fly a real one. I knew about Thunder Road, but they shut down years ago and I don't know if they allowed any stick time on the aircraft anyway.
CThanks for the server invite! If I were interested, what's the cost of the Rhino kit? Are they available in any form?
WHey, welcome! Yes kits are available. You can check the pinned posts in #
showcase for photos. The regular motors (57blf) kit starts at 299€ and the bigger motors (86blf) start at 399€. The kits are plug and play and the working is demonstrated on my YouTube VPforce DIY video
showcase for photos. The regular motors (57blf) kit starts at 299€ and the bigger motors (86blf) start at 399€. The kits are plug and play and the working is demonstrated on my YouTube VPforce DIY video WThe kit consists of two motors, control board and hookup wires
WYou would need a power supply and the mechanical part.
CSo the case/enclosure/gimbal mount is all separate? Is that what you are calling the "Rhino" - any separate kit for that?
WThe Rhino is the actual base, I currently offer that as a complete assembled product.
WThe motor kits are for diy'ers :)
CMakes sense. What's the cost on the full Rhino base then?
W800€
COkay, good to know! Thanks for explaining.
WYou're welcome!
CI love the FFB experience, glad to see you are doing some cool stuff with it
WYeah, wholly different experience!
VDoes the rhino come with the larger or smaller motors. And down the line do you think you'll make rhinos with even more powerful motors, 20nm<
Fthe question is, what for? why so much power? the rhino base with it's form and grip length is already really powerful. it needs to fixed really tight when it starts to unleash max forces, if not you are starting to move the base instead of the grip.
W1Nm = ~.7 ft·lb.
1 Foot = ~ 300mm. This is similar to the distance to the pivot in most real aircraft.
(F-18 has around ~ 1.5ft pitch, ~1ft roll, if the sources I've seen are accurate)
(the center of the palm may rest as much as 75mm above the base of the grip)
A pull force of ~20lbf for full deflection seems fairly typical of fighter aircraft.
(Looking for data on the f-18 I found a figure stating a force gradient of 3.5lbf/g. 3.5lbf * (7.5g-1g) ~= 23lbf = 31Nm at full aft stick.)
>20Nm seems fairly reasonable if you want to build a realistic stick for a modern jet.
manuvering aircraft without fbw (for instance the p-51) at high speed could easily become a two handed job.(>70lbf) But replicating that isn't really very viable for a ffb setup
1 Foot = ~ 300mm. This is similar to the distance to the pivot in most real aircraft.
(F-18 has around ~ 1.5ft pitch, ~1ft roll, if the sources I've seen are accurate)
(the center of the palm may rest as much as 75mm above the base of the grip)
A pull force of ~20lbf for full deflection seems fairly typical of fighter aircraft.
(Looking for data on the f-18 I found a figure stating a force gradient of 3.5lbf/g. 3.5lbf * (7.5g-1g) ~= 23lbf = 31Nm at full aft stick.)
>20Nm seems fairly reasonable if you want to build a realistic stick for a modern jet.
manuvering aircraft without fbw (for instance the p-51) at high speed could easily become a two handed job.(>70lbf) But replicating that isn't really very viable for a ffb setup
V20NM wouldnt be a terrible place to be, it would net you about half the stick force of a relatively light stick like the Mirage 2000 using the thrustmaster hornet grip and rhino base format.
VThe hornet springs give 35-40lbs at full pitch deflection, the excess after the regular lbs/g ratio is used for the AoA feedback.
WIf I ever finish my diy ffb stick project it would be fairly powerful as to replicate modern aircraft I decided on a design figure of 30Nm.
WDidn't realise that, neat.
VAlthough having used a 10KG force joystick I've become a huge fan of not having realistic forces haha, 4-5KG peak is my sweet spot
WOf course directly connecting the motors to the gimbal would be a little overkill. About a 10:1 reduction seems like the most you're going to easily fit in a single stage on a reasonably sized gimbal.
WThis is a good point, the demands of a simulator pilot are somewhat different to those of a real pilot.
VI also ran into some ergonomic issues with the wrist, because it was a short stick the angular deflection was much higher than something in a real aircraft. If it was a full size stick I suspect it would be a lot more manageable