PThe 'inertia' + damper effect gives it a feeling of some weight in the controls (weight of the actual control surfaces). And once the in-game spring effect kicks in everything feels like I "think" is should feel ... :)) I never flew any airplanes so my 'feeling' can be totally off, but nevertheless I enjoy what I have :))
MHaha yeah I their l threw everything onto 40 percent last night including friction and constant
MI'll watch the video tonight and try to work it out
MInterested to see others as well
MI tried this with the warbirds, it was nice
MThen I tried it with the mig15 and the stick kept beeping and breaking
Swhat are p effects
Pperiodic effects
Pnot sure exactaly how it works but that's the name
Sdoes the spring effect the spring strength coming from dcs
Sor is it an extra spring on top
Pthe spring settings in the 'Settings' tab is the overall spring setting, so from what I understand it gives dcs acess to the % of spring effect you set
Sso then that means that the other sliders basically dont do anything ?
Ssince the only effects I have ever felt from dcs have been spring and periodic only
Pso I'm still not 100% on all this, but from my understanding the Settings tab is the overall settings that the base will use ie. 75% of the spring power can be used by the game etc. then the Effects tab is for setting the strength of the periodic effects that happen.
Pflow chart from Walmis
Soh ok yeah it says gain settings
PI believe the gain setting is the overall "power" setting for the base, like the % of it's full power it can use?
Sthats master gain
Pplz don't quote me on any of this, I'm still very fresh at learning all this stuff lol
Sbut they are all gain, periodic effects gain, spring gain, friction gain etc
S
Pthanks, now my brain hurts. lol
Sno pain no gain
Pyou just killed me
Snp
Syou can flip that equation
Smultiply both sides by input
S(input)(Gain)=Output
Sinput is whatever strength signal dcs is sending then you multiply it by 1 if you want 100% gain and the output is the result of that
Sif you want half gain 50% then its input times 1/2
Pright, well I know who I'll be asking my questions to now
SI know this from electronics
Sbut I dont know anything about programing
Pwell I know almost nothing about electronics & even less about programing, so you're a few steps ahead of me
S
MHey maybe it's just my computer but I think it stutters dcs in VR every couple of seconds
MAhhhh I think it's just when I have the configuration program open
PThe way it works in DCS's:
- the game puts out mainly the Spring effect and Periodic effect (vibration during stalls, or damage to control surfaces, etc).
- The Spring effect in 'effects' tab gets over-ridden by DCS's in-game spring effect.
- The spring slider in "Settings" controls the overall strength of DCS's in-game spring effect. Adding "spring" effect from Effects doesn't do much on top of in-game spring effect, so I leave it off.
- DCS does not generate any inertia or damper signals, so those I add manually by enabling them in "effects" tab and then controlling their overall strength via sliders in Settings.
- I also ramped up the "spring strength proportional damping" to 100% (top right corner, under PSU power), it gives the in-game spring effect a nice balance, it's in addition to the damper 'effect'/slider.
- the game puts out mainly the Spring effect and Periodic effect (vibration during stalls, or damage to control surfaces, etc).
- The Spring effect in 'effects' tab gets over-ridden by DCS's in-game spring effect.
- The spring slider in "Settings" controls the overall strength of DCS's in-game spring effect. Adding "spring" effect from Effects doesn't do much on top of in-game spring effect, so I leave it off.
- DCS does not generate any inertia or damper signals, so those I add manually by enabling them in "effects" tab and then controlling their overall strength via sliders in Settings.
- I also ramped up the "spring strength proportional damping" to 100% (top right corner, under PSU power), it gives the in-game spring effect a nice balance, it's in addition to the damper 'effect'/slider.
MCan you send a pic of your effect settings?
MAnd the dampener one too?
MIs there a way to save different profiles for different aircraft?
MThink I need to change the stick centre position to stop the ka50 stick being so aggressively forward
Ppictures are above (yesterday), here's the link: 🧰support
- yes, you can save different profiles (using import/export buttons)
- stick center can be set via "FFB Axes Setup" on Settings tab (at the bottom). Essentially you set the stick new limits in X and Y via their min and max positions..
- yes, you can save different profiles (using import/export buttons)
- stick center can be set via "FFB Axes Setup" on Settings tab (at the bottom). Essentially you set the stick new limits in X and Y via their min and max positions..
MOh yeah I tried your setting but I guess I didn’t follow the effects tab
Sfor DIY kits, how do you wire up the e-stop on the rhino unit? it's not on the diagram (https://discord.com/channels/965234441511383080/972180323787997255/990914366155149362) or do you just route the 12v power though it or a relay or something?
WI connected it inline with the 20VDC positive power wire from the power supply.
WHit the e-stop and the positive lead is disconnected
Pif this hasn't been answered, periodic effects are the shaking effects that the game sends to the device