Bad attitude fella, I don't believe I have "spewed" anything , if a couple of questions leaves you s

Bad attitude fella, I don't believe I have "spewed" anything , if a couple of questions leaves you so butt hurt maybe you should take a break from the internet ??

Magpie•1/2/23, 3:07 AM

The beauty of discord is you can ask dumb questions. People aren't obligated to respond.

PPhantom Bad attitude fella, I don't believe I have "spewed" anything , if a couple of qu...

Donik•1/2/23, 3:10 AM

Cheers. Enjoy your Rhino base when you get it.

Not going to annoy the rest of the server with this from here on out.

gitbse•1/2/23, 11:18 PM

!status

Ggitbse !status

VPforceBot•1/2/23, 11:18 PM

Hey @gitbse,
So the last Shipped RHINO is #0030 on 2022-12-08
Average waiting time from preorder to shipped is 85 days, median is 109 days, max is 156 days
28 Rhinos are shipped in total

gitbse•1/2/23, 11:19 PM

Happy New Year

Ggitbse !status

Donik•1/2/23, 11:19 PM

Gonna be a long wait

gitbse•1/2/23, 11:20 PM

Yea. I'm around #200, but I'm not worried. Walmis said after the new year some of the bottlenecks should start to clear.

gitbse•1/2/23, 11:21 PM

Should be totally worth it.

Donik•1/2/23, 11:22 PM

No clue what # I am. Agree, will be worth the wait and cost.

Ahhh good bot. I got new info. I guess I'm #0272 & there's 242 Rhinos to go

FlatSpin•1/3/23, 1:07 AM

!status

FFlatSpin !status

VPforceBot•1/3/23, 1:07 AM

Hey @.flatspin,
So the last Shipped RHINO is #0030 on 2022-12-08
Average waiting time from preorder to shipped is 85 days, median is 109 days, max is 156 days
28 Rhinos are shipped in total

Harq•1/4/23, 10:36 PM

I may not be the bot, but I got my Rhino FedEx tracking numbers today! I'm #33.

FlatSpin•1/4/23, 11:04 PM

https://tenor.com/view/bh187-family-guy-peter-griffin-you-bastard-gif-21485042

Tenor

FlatSpin•1/4/23, 11:05 PM

Ancient Guardian•1/4/23, 11:15 PM

/VPforceBot

Ancient Guardian•1/4/23, 11:17 PM

!status

AAncient Guardian !status

VPforceBot•1/4/23, 11:17 PM

Hey @txgunslinger,
So the last Shipped RHINO is #0033 on 2023-01-04
Average waiting time from preorder to shipped is 88 days, median is 109 days, max is 177 days
29 Rhinos are shipped in total

FlatSpin•1/4/23, 11:23 PM

How do you know what number you are in the queue?

Harq•1/4/23, 11:25 PM

you can DM the bot with !info <the email you used to place your preorder>

Harq•1/4/23, 11:26 PM

it'll tell you your number and status

FlatSpin•1/4/23, 11:58 PM

@harq ty

HHarq I may not be the bot, but I got my Rhino FedEx tracking numbers today! I'm #33.

Donik•1/5/23, 12:02 AM

That's super exciting! How do you plan to mount it?

DDonik That's super exciting! How do you plan to mount it?

Harq•1/5/23, 12:18 AM

Here's my simpit design as of this moment. The Rhino will screw into 2 2"x6" mounting rails

Harq•1/5/23, 12:19 AM

I bought a volvo xc60 passenger seat off ebay for the seat. It's got all the motors and everything still

Donik•1/5/23, 12:21 AM

Heck yeah. Do you have the pit built yet or are you waiting for the rhino and seat?

Harq•1/5/23, 12:21 AM

wellllllll

Harq•1/5/23, 12:22 AM

I've had the seat for months now but haven't been in a hurry to build the pit for .... reasons

Harq•1/5/23, 12:22 AM

(read: laziness)

Harq•1/5/23, 12:22 AM

I've got all the panels done, but I need to cut the rails yet

Harq•1/5/23, 12:22 AM

shouldn't take too long really

PhantomOP•1/5/23, 12:25 AM

@walmis I've read the FAQ but still not sure, when it comes to being my turn in line can I customise some aspects at all (with additional funds of course), for me one area of concern is the exposed belts and gears, due to placement in my pit and likelihood of pet hair / dust getting into the mechanism's , I would wish those to be covered, I could make something myself but .....well ya know, in for a penny in for a pound and all that

, unless there is a reason why they are exposed in the first place maybe ?

Also you state a few motor variations, is there only the one option on the pre made Rhino , the larger optional motors only available for the kits ? sorry to anyone in advance if this post upsets them.

HHarq I've got all the panels done, but I need to cut the rails yet

Donik•1/5/23, 1:53 AM

Looking forward to seeing some pictures when you're done!

Stoned Kakapo•1/5/23, 5:03 AM

yaaaay less than half way there

PPhantom @walmis I've read the FAQ but still not sure, when it comes to being my turn in...

mechsicko•1/5/23, 5:47 AM

Correct, the big motors are only available as kits, the smaller motors are available both ways. I'm in the process of making kits to accompany walmis's kits so people can complete their own bases with basic skills. Here's some screenshots/vid to give an idea of the form factor. It's the smaller motors but the bigger ones will be the same thing just bigger. https://discordapp.com/channels/965234441511383080/972180323787997255/1045828088967204915

PhantomOP•1/5/23, 10:51 AM

Thx Thadiun

PPhantom @walmis I've read the FAQ but still not sure, when it comes to being my turn in...

walmis•1/5/23, 11:19 AM

Yep, I have plans to make a cover design and release stls

Kamasetto•1/5/23, 1:15 PM

where can I buy it? there is no #channel for that

walmis•1/5/23, 1:25 PM

check the #

faq and the preorder goes here: http://reserve.vpforce.eu

Google Docs

VPforce RHINO Preorder

Enter your details here, so you can enter the waiting queue for the Rhino FFB base.
Once the queue progresses I will get in touch with further details.

walmis•1/5/23, 4:34 PM

@Rhino Owner @FFB/Kit Owner
Firmware update released:

v1.0.13-3

v1.0.13-3

http://vpforcecontrols.com/usb/rhino/

1. Fix for USB issues on AMD boards
2. Hat buttons now correctly register for trim reset and trim release functions

1. Fix for USB issues on AMD boards
2. Hat buttons now correctly register for trim reset and trim release functions

walmis•1/6/23, 12:07 PM

Test batch of MT mounting plates for the Rhino have arrived!

Jaeger•1/6/23, 12:31 PM

Yeah, you are the men. Was thinking of making one in advance to v receiving my rhino, but I think, now I don't have to cut my fingers off on trying so. Aluminum?

walmis•1/6/23, 12:32 PM

4mm Steel

Wwalmis Test batch of MT mounting plates for the Rhino have arrived! 😏

Udo•1/6/23, 1:19 PM

woo!

Wwalmis Test batch of MT mounting plates for the Rhino have arrived! 😏

ddrake1984•1/6/23, 1:35 PM

Oooh

PhantomOP•1/6/23, 1:36 PM

Nice premium look to that as well

ddrake1984•1/6/23, 1:37 PM

Tho, I might mount mine differently

walmis•1/6/23, 1:42 PM

that's a pretty neat mounting!

Wwalmis 4mm Steel

Jaeger•1/6/23, 2:14 PM

Wouldn't aluminum the better choice? The Rhino is already kinda heavy, compared to a "normal" base, plus the higher forces needed to operate it, that will put a lot of stress on the table/Mt fitting. I would expect to save as much weight as possible.

JJaeger Wouldn't aluminum the better choice? The Rhino is already kinda heavy, compared ...

walmis•1/6/23, 2:59 PM

I think I can optimize the weight a bit with center cutouts

Haums•1/6/23, 3:11 PM

Does anyone have experience with using the base with condor 2?

Bad attitude fella, I don't believe I have "spewed" anything , if a couple of questions leaves you s

Similar Threads