Does the Rhino support VPC grips with analog axes and other festures that do not work through the sh
Does the Rhino support VPC grips with analog axes and other festures that do not work through the shift register emulation?
WYes they do work
AApologies if I’ve missed it, but what’s the throw of the base?
AHow many degrees does it deflect?
W+-22
Fhi, @walmis i filled out the pre-order form. do i get a mail confirmation or anything else?
WYou can ask the VPforceBot in a DM:
!info youremail
FGreat, thank you 
MAny folks have a good non-monster tech solution for mounting the base on an office chair set up (i.e. not clamped to the desk)? I take the caution I read on the desk mount due to the torque.
WIf I understood correctly - yes both pitch and roll has +- 22deg throw, 44deg total arc
W@Rhino Owner @FFB/Kit Owner
Initial release of the DCS telemetry effects framework is on GitHub !
https://github.com/walmis/VPforce-TelemFFB
It's far from finished, but hopefully someone will want to help maintain it
Stuff to try:
TF-51 flight, Mig-21 takeoff, gun fire, missile launches, landing, countermeasures
Initial release of the DCS telemetry effects framework is on GitHub !
https://github.com/walmis/VPforce-TelemFFB
It's far from finished, but hopefully someone will want to help maintain it
Stuff to try:
TF-51 flight, Mig-21 takeoff, gun fire, missile launches, landing, countermeasures
GitHub
DCS FFB Telemetry Effects (for VPforce FFB). Contribute to walmis/VPforce-TelemFFB development by creating an account on GitHub.
VMan, every time I come here it puts a smile on my face. Rare to see such frendliness on the internet lol.
BA great achievement. Do these effects appear only modules with no FFB implemented or do they supplement (or replace) the effects present in modules like the F-14?
WEffects are supplemented, for modules with good ffb implementation some of the duplication can be turned off.
P@walmis thank you for the release of the effects! One question I have is how to control the intensity of each effect?
P
Pif it's pre-configured, where can I change it (if it is possible at all?)
P
Pis the above location the intensity configuration ?
Pi guess i just have to play around with the values.. they seem to be in couple of sections..
P@walmis - what are these: "telemetry_item1" and "telemetry_item2" ? Are they defined somewhere ?
WYeah, I'll move the settings to an .ini file once I have some more spare time, would be much better than to hardcode
WThese should be the actual telemetry keys (such as AoA, GunShells, etc). Though these are only used when developing/plotting the telemetry, ignore them otherwise.
Pso, how do I launch it then, if it's optional, like below is the correct string ?
python main.py --teleplot 127.0.0.1:47269 -D ffff:2055
python main.py --teleplot 127.0.0.1:47269 -D ffff:2055
WJust python main.py should work
Por
python main.py ffff:2055
or just:
python main.py
python main.py ffff:2055
or just:
python main.py
Pgotcha, thank you, @walmis !
P@walmis seems theres and error in ffb_rhyno.py, the letter case must be lower case instead upper case, i fixed it on line 255 per the error message
P
Pchanging Device to device laumched it
Pabout to test it
PSound Module from Andres Simshaker cant start due to network port conflict
Pit seems both apps use the same port
P
P@walmis changing teleplot port doesnt fix it, so its some other port... Anyway to change the ports somehow so both apps would run simultaneously ?
Phmm, the app is running, its receiving stuff but the stick doesnt shake at all
P
Pmaybe it needs a new firmware but i cant update it via the browsrer, complains it cant claim the device, however disconnect/connect works, nothing else is using it (vprforce app is off)
P
Pi guess ill wait until someone else figures it out
Punless A8 isn't supported? will try p51
PQuestion: which serial numbers are being produced at the moment? Is there a way to monitor that? I seem to remember there was, but can't find it on the discord anymore.
Y!status
VHey @yeoldgrog,
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total
Y@xupicor
Pah, thanks!
Pstill quite a while till my lucky number then! Half way there.
YThat's not so bad then
V:package: RHINO #0037 Has Shipped!
