@Rhino Owner @FFB/Kit Owner Initial release of the DCS telemetry effects framework is on GitHub ! h

@Rhino Owner @FFB/Kit Owner
Initial release of the DCS telemetry effects framework is on GitHub !
https://github.com/walmis/VPforce-TelemFFB

It's far from finished, but hopefully someone will want to help maintain it

Stuff to try:
TF-51 flight, Mig-21 takeoff, gun fire, missile launches, landing, countermeasures

GitHub

GitHub - walmis/VPforce-TelemFFB: DCS FFB Telemetry Effects (for VP...

DCS FFB Telemetry Effects (for VPforce FFB). Contribute to walmis/VPforce-TelemFFB development by creating an account on GitHub.

Viktor Martin•1/22/23, 12:53 PM

Man, every time I come here it puts a smile on my face. Rare to see such frendliness on the internet lol.

Wwalmis @Rhino Owner @FFB/Kit Owner Initial release of the DCS telemetry effects framew...

Beathmeister•1/22/23, 3:30 PM

A great achievement. Do these effects appear only modules with no FFB implemented or do they supplement (or replace) the effects present in modules like the F-14?

BBeathmeister A great achievement. Do these effects appear only modules with no FFB implemente...

walmisOP•1/22/23, 3:34 PM

Effects are supplemented, for modules with good ffb implementation some of the duplication can be turned off.

peachmonkey•1/22/23, 6:19 PM

@walmis thank you for the release of the effects! One question I have is how to control the intensity of each effect?

peachmonkey•1/22/23, 6:19 PM

peachmonkey•1/22/23, 6:20 PM

if it's pre-configured, where can I change it (if it is possible at all?)

peachmonkey•1/22/23, 6:22 PM

peachmonkey•1/22/23, 6:22 PM

is the above location the intensity configuration ?

peachmonkey•1/22/23, 6:28 PM

i guess i just have to play around with the values.. they seem to be in couple of sections..

peachmonkey•1/22/23, 6:40 PM

@walmis - what are these: "telemetry_item1" and "telemetry_item2" ? Are they defined somewhere ?

Ppeachmonkey i guess i just have to play around with the values.. they seem to be in couple o...

walmisOP•1/22/23, 7:41 PM

Yeah, I'll move the settings to an .ini file once I have some more spare time, would be much better than to hardcode

Ppeachmonkey @walmis - what are these: "telemetry_item1" and "telemetry_item2" ? Are they...

walmisOP•1/22/23, 7:43 PM

These should be the actual telemetry keys (such as AoA, GunShells, etc). Though these are only used when developing/plotting the telemetry, ignore them otherwise.

Wwalmis These should be the actual telemetry keys (such as AoA, GunShells, etc). Though ...

peachmonkey•1/22/23, 7:53 PM

so, how do I launch it then, if it's optional, like below is the correct string ?

python main.py --teleplot 127.0.0.1:47269 -D ffff:2055

walmisOP•1/22/23, 7:54 PM

Just python main.py should work

peachmonkey•1/22/23, 7:54 PM

or

python main.py ffff:2055

or just:

python main.py

Wwalmis Just python main.py should work

peachmonkey•1/22/23, 7:54 PM

gotcha, thank you, @walmis !

peachmonkey•1/22/23, 9:50 PM

@walmis seems theres and error in ffb_rhyno.py, the letter case must be lower case instead upper case, i fixed it on line 255 per the error message

peachmonkey•1/22/23, 9:50 PM

peachmonkey•1/22/23, 9:50 PM

changing Device to device laumched it

peachmonkey•1/22/23, 9:51 PM

about to test it

peachmonkey•1/22/23, 10:00 PM

Sound Module from Andres Simshaker cant start due to network port conflict

peachmonkey•1/22/23, 10:04 PM

it seems both apps use the same port

peachmonkey•1/22/23, 10:04 PM

peachmonkey•1/22/23, 10:06 PM

@walmis changing teleplot port doesnt fix it, so its some other port... Anyway to change the ports somehow so both apps would run simultaneously ?

peachmonkey•1/22/23, 10:12 PM

hmm, the app is running, its receiving stuff but the stick doesnt shake at all

peachmonkey•1/22/23, 10:12 PM

peachmonkey•1/22/23, 10:18 PM

maybe it needs a new firmware but i cant update it via the browsrer, complains it cant claim the device, however disconnect/connect works, nothing else is using it (vprforce app is off)

peachmonkey•1/22/23, 10:18 PM

peachmonkey•1/22/23, 10:19 PM

i guess ill wait until someone else figures it out

peachmonkey•1/22/23, 10:23 PM

unless A8 isn't supported? will try p51

Polack-1•1/22/23, 10:31 PM

Question: which serial numbers are being produced at the moment? Is there a way to monitor that? I seem to remember there was, but can't find it on the discord anymore.

Ye Old Grog•1/23/23, 2:18 AM

!status

YYe Old Grog !status

VPforceBot•1/23/23, 2:18 AM

Hey @yeoldgrog,
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total

Ye Old Grog•1/23/23, 2:18 AM

@xupicor

Polack-1•1/23/23, 2:19 AM

ah, thanks!

Polack-1•1/23/23, 2:25 AM

still quite a while till my lucky number then! Half way there.

Ye Old Grog•1/23/23, 2:29 AM

That's not so bad then

VPforceBot•1/23/23, 9:18 AM

:package: RHINO #0037 Has Shipped!

Ppeachmonkey Click to see attachment

walmisOP•1/23/23, 10:00 AM

Is it possible that you had two tabs open ? It will not work then, I've noticed.

Viktor Martin•1/23/23, 12:10 PM

Ay another one out.

AndyHill•1/23/23, 7:12 PM

Master gain seems to go from 0 to 200%, is there a special signifigance to the 100% position?

Ancient Guardian•1/23/23, 11:47 PM

!status

AAncient Guardian !status

VPforceBot•1/23/23, 11:47 PM

Hey @txgunslinger,
So the last Shipped RHINO is #0037 on 2023-01-23
Average waiting time from preorder to shipped is 105 days, median is 110 days, max is 194 days
35 Rhinos are shipped in total

AAndyHill Master gain seems to go from 0 to 200%, is there a special signifigance to the 1...

walmisOP•1/24/23, 5:54 AM

It's currently clamped to 100% in firmware - will need to fix this GUI discrepancy.

walmisOP•1/24/23, 6:30 PM

@peachmonkey I've updated https://github.com/walmis/VPforce-TelemFFB
Now features a configuration file and changed the telemetry port to a more random one to not interfere with SimShaker.
P.S run again the Install the required packages: pip install -r requirements.txtInstall the required packages: pip install -r requirements.txt

GitHub

GitHub - walmis/VPforce-TelemFFB: DCS FFB Telemetry Effects (for VP...

DCS FFB Telemetry Effects (for VPforce FFB). Contribute to walmis/VPforce-TelemFFB development by creating an account on GitHub.

Wwalmis @peachmonkey I've updated https://github.com/walmis/VPforce-TelemFFB Now feature...

peachmonkey•1/24/23, 7:57 PM

this is awesome, @walmis , thank you! I'll give it a try and let you know. Btw, do I need the latest firmware for it? I'm running whatever the version before the latest one..

walmisOP•1/24/23, 7:58 PM

If it's the 1.0.13 then it's good to go!

Wwalmis If it's the 1.0.13 then it's good to go!

peachmonkey•1/24/23, 7:59 PM

cool, i'll make sure to test it with .13

Wwalmis @peachmonkey I've updated https://github.com/walmis/VPforce-TelemFFB Now feature...

peachmonkey•1/24/23, 8:03 PM

as far as the udp port: are you saying that the client will pick the unused port dynamically? (I don't see how I can use a specific fixed port in the config, unless it's buried somewhere else)..

walmisOP•1/24/23, 8:05 PM

it's here https://github.com/walmis/VPforce-TelemFFB/blob/master/export/TelemFFB.lua#L17 and here https://github.com/walmis/VPforce-TelemFFB/blob/master/main.py#L89
But it should be free

@Rhino Owner @FFB/Kit Owner Initial release of the DCS telemetry effects framework is on GitHub ! h

Similar Threads

Similar Threads

Similar Threads