IL2 has ffb effects built in, you get rumble/bumpy effects on taxi & takeoff, flaps & gear down give

IL2 has ffb effects built in, you get rumble/bumpy effects on taxi & takeoff, flaps & gear down give rumble effects too, firing the gun gives vibration/shake, stick moves with trim, buffeting effect at stall high AoA. I'm sure there are other subtle effects also, I haven't played IL2 lately.

PPiNKSH!T IL2 has ffb effects built in, you get rumble/bumpy effects on taxi & takeoff, fl...

TheAmazinGreat•2/7/23, 4:00 PM

Thanks for the info!

TTheAmazinGreat Thanks for the info!

PiNKSH!TOP•2/7/23, 4:19 PM

no worries m8

SStal2k It probably would, it certainly moves with the trim buttons and the other autopi...

Virus•2/7/23, 5:32 PM

How do you make the Autopilot work with the Tomcat?
For me it doesn't work, I press the reference button and the light goes out but the plane climbs or dive as no autopilot is engaged. Only once (and I don't know how) it worked

Virus•2/7/23, 5:34 PM

Also the trim center and the stick position doesn't match with the tomcat...if the trim is at 0 (center position) the stick is shifted forward

VVirus Also the trim center and the stick position doesn't match with the tomcat...if t...

Jaeger•2/7/23, 5:55 PM

That's true to life from what I get. Autopilot works as well like a Charme

Jaeger•2/7/23, 5:56 PM

You got only like around 40% forward movement compared to backwards range of motion

Virus•2/7/23, 6:17 PM

yes I know that, and this is not what I am complaining about...the thing is that it trim is set to center (both watching trim needle in pit, and ctrl+enter windows) the stick is not centered but shifted forward (both physically and both watching ctrl+enter window)

JJaeger That's true to life from what I get. Autopilot works as well like a Charme

Virus•2/7/23, 6:18 PM

What do you do to use the autopilot?
I trim the aircraft as well as possible for level flight, enable Autopilot, enable alt hold switch, press the nws button...the reference light turn off...and the aicraft doesn't fly level

Jaeger•2/7/23, 6:20 PM

Hmm.... basically the same. Do you use any curves? I found the Rhino so precise, I neither use curves nor dead zones.

Jaeger•2/7/23, 6:21 PM

Did you enable FFB trim in special settings

Jaeger•2/7/23, 6:21 PM

Not sure if that would make a difference.

Jaeger•2/7/23, 6:22 PM

AP works great, rhino also has that 1hz movement you see in the pit

VVirus What do you do to use the autopilot? I trim the aircraft as well as possible for...

Stal2k•2/7/23, 6:34 PM

Have you clicked the FFB in the F-14 Special options? Without that there are all kinds of problems, otherwise the way you describe is how to enable the AP.

VVirus yes I know that, and this is not what I am complaining about...the thing is that...

roller25.•2/7/23, 6:36 PM

After scratching my head for a while on this one I realised that it like that because the Tomcats grip is actually tilted backward from the main lower shaft of the stick. You can see it in pictures. So to correct it you would need a physical adapter that replicates this.

roller25.•2/7/23, 6:39 PM

📃general

SStal2k Have you clicked the FFB in the F-14 Special options? Without that there are all...

Virus•2/7/23, 6:41 PM

FFB trim implementation?yes i ticked that

Stal2k•2/7/23, 6:42 PM

I play in VR and I guess I never really notice or am bothered by it. A few modules like the A-10 and to a degree the Hornet are done that way. The interesting thing is even if the stick is offset, in the game window the 'cross' in the control window is also offset so it should appear centered relative to where the axis cross if that makes sense.

roller25.•2/7/23, 6:43 PM

Stal2k•2/7/23, 6:43 PM

Virus, for the F-14 there are two places, 1) regular DCS options and 2) in the special options, you have to go to the F-14 itself and there is a checkbox in there you need to tick as well. I was having all kinds of problems with it until I ticked the special option.

roller25.•2/7/23, 6:44 PM

That option doesn't correct the physical location of the stick.

SStal2k Virus, for the F-14 there are two places, 1) regular DCS options and 2) in the *...

Virus•2/7/23, 6:44 PM

yes I know...and I have it ticked...also the trim moves the stick

Stal2k•2/7/23, 6:44 PM

@Roller25 Are you positive that the stick being slanted is being 'modeled' in the FFB implementation the same as just less travel? I think we are talking about two different things here.

Stal2k•2/7/23, 6:46 PM

@virusam Does the regular AP work without altitude hold? or just can you trim out the airplane in general without the stick requiring constant back pressure? If so then there may be something wrong somewhere else. Are you using an extension that is offset from the base that is maybe pulling?

roller25.•2/7/23, 6:46 PM

The stick is definitely modelled on the position of the main shaft, not the grip.

SStal2k @virusam Does the regular AP work without altitude hold? or just can you trim ou...

Virus•2/7/23, 6:48 PM

I need to try other modes. Usually for me the only useful one is alt hold

Stal2k•2/7/23, 6:50 PM

Ya, just enabling the AP functions as sort of an attitude hold within reason(constraints). All I know is mine was wonky until I checked the box in the special options. However if there is an issue with the centering/offset - just speculating - but based on the other behavior it seems like the tomcat is very sensitive with the FFB stuff and can get into a situation with a 'runaway' stick.

Stal2k•2/7/23, 6:53 PM

Probably basic solutions you've already tried but just in case, make 10000% sure no other peripheral is bound to the pitch/roll axis. I know a lot of them default to that and it's usually fine to leave it but just in an abundance of caution I'd clear it. Otherwise, when you're saying it's off-centered in the game control display, you mean it's off center where the axis lines cross, or just off centered from the centerpoint, but otherwise on the cross? I have a meeting in 8 minutes but after that if I can I'll hop in and check how my control window looks.

Virus•2/7/23, 6:55 PM

i will post a screenshot asap

Stal2k•2/7/23, 6:57 PM

Ok, I'll check 1) Verify the attitude hold works more less same as it did pre-ffb 2) position of stick both physically and in-game window with 0 trim and level flight no AP.

Virus•2/7/23, 7:20 PM

Virus•2/7/23, 7:20 PM

stick at mission start

Virus•2/7/23, 7:21 PM

stick position with trim centered

Virus•2/7/23, 7:21 PM

ffb enabled

Virus•2/7/23, 7:22 PM

trim ffb implementation in special options enabled

Stal2k•2/7/23, 8:04 PM

Ok, so I just tested mine and it does the same thing. I think that is the way it's supposed to be. The autopilot (attitude) works same as before, and the plane will kind of 'stick' where you leave it. Engaging altitude hold also works, I think they desensitized it a bit but it used to require damn near 0 +/- FPM, I think I engaged it with ~200 or so and it worked fine. When holding wings level the stick is also basically where it is on your control indicator. FYI the trimmer does not work when you have the base AP engaged.

Stal2k•2/7/23, 8:08 PM

@virusam Also, I guess to confirm - maybe I should have searched first lol. from: https://forum.dcs.world/topic/235939-no-bug-ffb-issues/ (tldr; it's supposed to work like it is)

VVirus yes I know that, and this is not what I am complaining about...the thing is that...

Magpie•2/7/23, 11:11 PM

I can I ended up just calibrating a way shorter Y axis for this. I calibrated from the seat to maybe 70 percent up

VVirus Also the trim center and the stick position doesn't match with the tomcat...if t...

Hextopia•2/8/23, 2:13 AM

This is how the actual plane is

Hextopia•2/8/23, 2:13 AM

It's because you need far more rearward throw on the stick since you almost never are trying to push over at 5+ negative G's

Hextopia•2/8/23, 2:14 AM

Pretty sure quite a few modern center stick fighters had a design similar to that where forward throw was much smaller than rearward throw

HHextopia This is how the actual plane is

roller25.•2/8/23, 3:39 AM

Yes but the grip has an angle offset to compensate. In the real jet, the stick base is slanted forward, but the grip is perfectly upright and central to your legs.

roller25.•2/8/23, 3:40 AM

The proper fix would be to make an adapter for the Rhino to have the same angle offset rearward.

roller25.•2/8/23, 3:41 AM

It would then match what the stick does in sim.

sydost•2/8/23, 6:01 AM

You could also tilt the Rhino base backwards to compensate the forward stick position. Depends on the mount if it is doable.

GitHub•2/8/23, 6:02 AM

walmis

[VPforce-TelemFFB:master] 1 new commit

e598329e598329 Fix launch by running the script directly. Twea... - Valmantas Paliksa

Virus•2/8/23, 7:59 AM

Ok..
About the autopilot...very strange thing....it worked in 2d, but doesn't in VR... don't know if that is the culprit or other parameters

SStal2k Ok, so I just tested mine and it does the same thing. I think that is the way it...

Virus•2/8/23, 8:13 AM

Same exact condition in 2d the AP worked. In VR not...
I need to test more

Bato•2/8/23, 12:56 PM

unit 44 arrived home, the sturdy package was helpful because the delivery man thought it would be a good idea to put the 7kg package on top of a not stable bin

Stoned Kakapo•2/8/23, 3:09 PM

I need the 11 people infront of me to turn me into #45

DrQuinn•2/8/23, 3:11 PM

How do yo see where you are in the order line?

IL2 has ffb effects built in, you get rumble/bumpy effects on taxi & takeoff, flaps & gear down give

Similar Threads