It probably would, it certainly moves with the trim buttons and the other autopilot modes in the Tom

It probably would, it certainly moves with the trim buttons and the other autopilot modes in the Tomcat, don't see why the ACLS would be any different, but I guess to be fair, dumber things have happened.

Magpie•2/7/23, 2:31 AM

I wish the stick moved in the trainer's or Apache when the pilot moves it

MMagpie I wish the stick moved in the trainer's or Apache when the pilot moves it

ddrake1984•2/7/23, 2:42 AM

Im gonna do this to you https://youtu.be/LCm1Q8cK4l0

YouTubeMichael Holmes

*Whack* fuck

Magpie•2/7/23, 2:46 AM

Magpie•2/7/23, 2:47 AM

Just the excuse I needed to get into larping

MMagpie I wish the stick moved in the trainer's or Apache when the pilot moves it

Stal2kOP•2/7/23, 2:57 AM

I wonder if that type of telemetry is part of the export, if so probably wouldn't be too hard to implement in Walmis's VPForce telemetry app, I say confidently as a person who has no idea how hard it actually is to implement

MMagpie Just the excuse I needed to get into larping

ddrake1984•2/7/23, 3:04 AM

That’s beyond larp

ToreDL87•2/7/23, 3:46 AM

Those oscillations is why I like the MSFFB2, the IR sensor means I can leave two fingers high up on the grip and maintain control but disable FFB, when it starts oscillating like crazy

TToreDL87 Those oscillations is why I like the MSFFB2, the IR sensor means I can leave two...

mechsicko•2/7/23, 4:55 AM

An LED/LDR optical switch like that can be implemented on a Rhino without much trouble, there's already a way to use an e-stop button.

I'd rather have adjustable spike filter though, it's distracting and for the stick to go limp when you're hands not in the one position. Irl long flights you sometimes switch hands, or use super relaxed grip, maybe just with your fingertip for a bit, or your knee while eating a sandwich or 'look ma no hands!' :p

MMagpie I have the 20cm extension on it. Sometimes it likes to start rocking back and fo...

walmis•2/7/23, 5:27 AM

That's with endstops enabled?

Magpie•2/7/23, 5:27 AM

Endstops did it worse so I just turned them off

Magpie•2/7/23, 5:28 AM

I have a bit of damping on (can't remember the term you use)

WWill3D Maybe we need a spike filter ? Like we have on motion rigs ?

walmis•2/7/23, 6:21 AM

I have a rate limiter on the FFB "center point" modulation, but apparently it's still too fast

Wwalmis I have a rate limiter on the FFB "center point" modulation, but apparently it's ...

Will3D•2/7/23, 7:03 AM

Is it user adjustable?

walmis•2/7/23, 7:06 AM

not yet

TheAmazinGreat•2/7/23, 3:53 PM

I have a question on FFB effects. I am an IL2 player, don’t know if I will ever get into DCS. What FFB effects are modeled on IL2? I see there is development for extra effects using telemetry for DCS. Does IL2 have the telemetry output that things would need to be developed/scripted in the same way? Or does IL2 work differently that the extra effects work natively?

I know there was some mention of the elevator droop above but what about the stuff like AOA buffeting and weapon effects?

TTheAmazinGreat I have a question on FFB effects. I am an IL2 player, don’t know if I will ever ...

PiNKSH!T•2/7/23, 3:57 PM

IL2 has ffb effects built in, you get rumble/bumpy effects on taxi & takeoff, flaps & gear down give rumble effects too, firing the gun gives vibration/shake, stick moves with trim, buffeting effect at stall high AoA. I'm sure there are other subtle effects also, I haven't played IL2 lately.

PPiNKSH!T IL2 has ffb effects built in, you get rumble/bumpy effects on taxi & takeoff, fl...

TheAmazinGreat•2/7/23, 4:00 PM

Thanks for the info!

TTheAmazinGreat Thanks for the info!

PiNKSH!T•2/7/23, 4:19 PM

no worries m8

SStal2k It probably would, it certainly moves with the trim buttons and the other autopi...

Virus•2/7/23, 5:32 PM

How do you make the Autopilot work with the Tomcat?
For me it doesn't work, I press the reference button and the light goes out but the plane climbs or dive as no autopilot is engaged. Only once (and I don't know how) it worked

Virus•2/7/23, 5:34 PM

Also the trim center and the stick position doesn't match with the tomcat...if the trim is at 0 (center position) the stick is shifted forward

VVirus Also the trim center and the stick position doesn't match with the tomcat...if t...

Jaeger•2/7/23, 5:55 PM

That's true to life from what I get. Autopilot works as well like a Charme

Jaeger•2/7/23, 5:56 PM

You got only like around 40% forward movement compared to backwards range of motion

Virus•2/7/23, 6:17 PM

yes I know that, and this is not what I am complaining about...the thing is that it trim is set to center (both watching trim needle in pit, and ctrl+enter windows) the stick is not centered but shifted forward (both physically and both watching ctrl+enter window)

JJaeger That's true to life from what I get. Autopilot works as well like a Charme

Virus•2/7/23, 6:18 PM

What do you do to use the autopilot?
I trim the aircraft as well as possible for level flight, enable Autopilot, enable alt hold switch, press the nws button...the reference light turn off...and the aicraft doesn't fly level

Jaeger•2/7/23, 6:20 PM

Hmm.... basically the same. Do you use any curves? I found the Rhino so precise, I neither use curves nor dead zones.

Jaeger•2/7/23, 6:21 PM

Did you enable FFB trim in special settings

Jaeger•2/7/23, 6:21 PM

Not sure if that would make a difference.

Jaeger•2/7/23, 6:22 PM

AP works great, rhino also has that 1hz movement you see in the pit

VVirus What do you do to use the autopilot? I trim the aircraft as well as possible for...

Stal2kOP•2/7/23, 6:34 PM

Have you clicked the FFB in the F-14 Special options? Without that there are all kinds of problems, otherwise the way you describe is how to enable the AP.

VVirus yes I know that, and this is not what I am complaining about...the thing is that...

roller25.•2/7/23, 6:36 PM

After scratching my head for a while on this one I realised that it like that because the Tomcats grip is actually tilted backward from the main lower shaft of the stick. You can see it in pictures. So to correct it you would need a physical adapter that replicates this.

roller25.•2/7/23, 6:39 PM

📃general

SStal2k Have you clicked the FFB in the F-14 Special options? Without that there are all...

Virus•2/7/23, 6:41 PM

FFB trim implementation?yes i ticked that

Stal2kOP•2/7/23, 6:42 PM

I play in VR and I guess I never really notice or am bothered by it. A few modules like the A-10 and to a degree the Hornet are done that way. The interesting thing is even if the stick is offset, in the game window the 'cross' in the control window is also offset so it should appear centered relative to where the axis cross if that makes sense.

roller25.•2/7/23, 6:43 PM

Stal2kOP•2/7/23, 6:43 PM

Virus, for the F-14 there are two places, 1) regular DCS options and 2) in the special options, you have to go to the F-14 itself and there is a checkbox in there you need to tick as well. I was having all kinds of problems with it until I ticked the special option.

roller25.•2/7/23, 6:44 PM

That option doesn't correct the physical location of the stick.

SStal2k Virus, for the F-14 there are two places, 1) regular DCS options and 2) in the *...

Virus•2/7/23, 6:44 PM

yes I know...and I have it ticked...also the trim moves the stick

Stal2kOP•2/7/23, 6:44 PM

@Roller25 Are you positive that the stick being slanted is being 'modeled' in the FFB implementation the same as just less travel? I think we are talking about two different things here.

Stal2kOP•2/7/23, 6:46 PM

@virusam Does the regular AP work without altitude hold? or just can you trim out the airplane in general without the stick requiring constant back pressure? If so then there may be something wrong somewhere else. Are you using an extension that is offset from the base that is maybe pulling?

roller25.•2/7/23, 6:46 PM

The stick is definitely modelled on the position of the main shaft, not the grip.

SStal2k @virusam Does the regular AP work without altitude hold? or just can you trim ou...

Virus•2/7/23, 6:48 PM

I need to try other modes. Usually for me the only useful one is alt hold

Stal2kOP•2/7/23, 6:50 PM

Ya, just enabling the AP functions as sort of an attitude hold within reason(constraints). All I know is mine was wonky until I checked the box in the special options. However if there is an issue with the centering/offset - just speculating - but based on the other behavior it seems like the tomcat is very sensitive with the FFB stuff and can get into a situation with a 'runaway' stick.

Stal2kOP•2/7/23, 6:53 PM

Probably basic solutions you've already tried but just in case, make 10000% sure no other peripheral is bound to the pitch/roll axis. I know a lot of them default to that and it's usually fine to leave it but just in an abundance of caution I'd clear it. Otherwise, when you're saying it's off-centered in the game control display, you mean it's off center where the axis lines cross, or just off centered from the centerpoint, but otherwise on the cross? I have a meeting in 8 minutes but after that if I can I'll hop in and check how my control window looks.

Virus•2/7/23, 6:55 PM

i will post a screenshot asap

Stal2kOP•2/7/23, 6:57 PM

Ok, I'll check 1) Verify the attitude hold works more less same as it did pre-ffb 2) position of stick both physically and in-game window with 0 trim and level flight no AP.

Virus•2/7/23, 7:20 PM

Virus•2/7/23, 7:20 PM

stick at mission start

Virus•2/7/23, 7:21 PM

stick position with trim centered

Virus•2/7/23, 7:21 PM

ffb enabled

Virus•2/7/23, 7:22 PM

trim ffb implementation in special options enabled

It probably would, it certainly moves with the trim buttons and the other autopilot modes in the Tom

Similar Threads