Do we have to do anything special for DCS ? Or is that completely native ?
Do we have to do anything special for DCS ? Or is that completely native ?
AThere's native and then there's some kind of telemetry project going on in the background, walmis & co can probably fill you in
Asome modules are good natively, some not quite perfect
AI haven't tried the telemetry thing yet
WOk great. I did hear the f14 was good. But I don’t fly it! Generally more ww2. Feeling cannon fire in the motion rig is something else.
Athe ww2 modules I've tried so far have been pretty good natively
WThat’s good to know. Thx
PAs Andy said there are different FFB effects per module it denpends on the Module maker & what they added, the F-14 is pretty much top shelf FFB effects from what I hear. VPforce has a Telemetry App for DCS that will give FFB effects to all the aircraft & can be tweaked also per plane, this doesn't overwrite any of the native effects but will just add the missing effects
WThanks. So where does one get the telemetry app? BTW, where in Aus are you ? I'm in country SA. Don't think there are too many of us here...
PI think there a couple of Aussies in here, VPforce Telemetry App link; https://github.com/walmis/VPforce-TelemFFB
GitHub
DCS FFB Telemetry Effects (for VPforce FFB). Contribute to walmis/VPforce-TelemFFB development by creating an account on GitHub.
Pdownload & install python & git, I suggest doing it through git, it makes the updating etc. alot easier
V:package: RHINO #0050 Has Shipped!
V:package: RHINO #0052 Has Shipped!
TOk walmis, you're going to need to slow down. At this rate I'm running out of time to order a grip and getting it delivered before the rhino arrives
THopefully virpil backorder isn't super long 
LI order a throttle on the 20. January and it arrived yesterday
TNice, that should be about the right amount of time if I order now
PWow Walmis you're really getting a bit of a roll on aren't you!
SHappy day for you!! 
S@kiwi320 @magpiee I just noticed we're all birds
MBunch of weirdos
T
R@will3d I am in central vic 
DOMG OMG OMG
DIt’s my bday today, what great news to wake up to
DThanks walmis
WGood morning!
RI'm an Aussie 
Swallabytopia!
WAll up early flying!??
WLol.
TFNQ
T
FMine just turned up I currently play A10C and BS2 - but want to learn more helis - is there a "the best supported heli in DCS for vpforce is <what?>" - considering both the vpforce software and the current DCS FFB bugs?
I currently play A10C and BS2 - but want to learn more helis - is there a "the best supported heli in DCS for vpforce is <what?>" - considering both the vpforce software and the current DCS FFB bugs?
Phey m8, I can only speak for the Huey & Ka 50 bs2 I have the bs3 but not had time ti do my bindings etc. yet. With the VPforce DCS Telemetry App running in the Huey I get effects for most of the flight, etl etc. but the biggest game changer for me when it comes to the RHINO & flying Heli's is the force trim, that has been huge to me, it's made things feel so much better especially for hovering stationary, well somewhat stationary 
. The Ka 50 has been just as improved by the RHINO though I haven't flown it yet with the Telem app too, on the Telem app it's great, it adds effects without over riding any default effects from the module itself. I've been intending on testing the free Blackhawk mod with the RHINO & telemetry app I've flown it before owning the Rhino but not since, also for mods like this if they don't support ffb or force trim natively the VPforce telem app should take over completely & you can use the VPforce config app to bind force trim buttons to your stick also. I'm planning on testing this out today. As for your question as to what dcs heli is best supported, I think the Vpforce Telemetry App will make them all great with the Rhino so mainly look for the best flight model. Also that blackhawk is really good.
. The Ka 50 has been just as improved by the RHINO though I haven't flown it yet with the Telem app too, on the Telem app it's great, it adds effects without over riding any default effects from the module itself. I've been intending on testing the free Blackhawk mod with the RHINO & telemetry app I've flown it before owning the Rhino but not since, also for mods like this if they don't support ffb or force trim natively the VPforce telem app should take over completely & you can use the VPforce config app to bind force trim buttons to your stick also. I'm planning on testing this out today. As for your question as to what dcs heli is best supported, I think the Vpforce Telemetry App will make them all great with the Rhino so mainly look for the best flight model. Also that blackhawk is really good.P
taking this up in support
LWhat's A (mm)? Rebuilding my pit in preparation and the front panel is probably too close because maximum throw is 22° (that's not in FAQ yet btw)
WIt's 125mm
LGeezus with the trigger folded I need 20 cm space 
I need a longer base plate under my rig. (Very rough measurements just by copying the dimensions already in the pictures - I don't have my Rhino yet)
I need a longer base plate under my rig. (Very rough measurements just by copying the dimensions already in the pictures - I don't have my Rhino yet)
WYou can also rotate it around
RRotating 180 to use the short side won’t have any issues? I’ll need to that for my pit?
RYou’ve also programmed virtual end stops so throw can be controlled ?
WYeah no problem in using it rotated. Yeah, it's also possible to devise a 3d printable hardware throw limiter. I'll do some prototypes soon.
GAI mounted the rhino backwards and i'm a model citizen, so there should be no issues
Pif we just do 'git pull' will that update the telem app with this ?
?LYes
LDouble check that you install the new Updated Export Script
Pahh nice, I've used that for updating the whole thing but wasn't sure if it's the same for updates like this one
LHey @walmis,
I currently have a 24V, 10A Power Supply for the 57BLF03 motors. Do you think it would make sense to upgrade to something like 20A? Or is there some sort of Limit on how much the Motors can take?
Thanks!
I currently have a 24V, 10A Power Supply for the 57BLF03 motors. Do you think it would make sense to upgrade to something like 20A? Or is there some sort of Limit on how much the Motors can take?
Thanks!
DA version with less angle could use a bigger wheel to get more power?
