https://youtu.be/nBqm1JwMcpw

Magnetic 6DoF | Coming Soon from Iris Dynamics

https://www.irisdynamics.com/products/orca_series/?utm_content=YT_6DOFTrailer
-------------------

Subscribe

! Follow us on LinkedIn, or join our mailing list by sending us a message on our website to keep up to date.

Website - https://www.irisdynamics.com/?utm_content=YT_6DOFTrailer
Contact Us - https://www.irisdynamics.com/contact/?utm_conten...

Propeler3D•3/17/23, 9:41 AM

NOT MY! Just interesting implementation. May be someone took some ideas from it. https://youtu.be/q_VjEtdSwgY https://youtu.be/aSbWcie6o6k

YouTubeСало лётчик

гимбал загрузки joystick ffb

YouTubeСало лётчик

Cockpit force feedback

Dddrake1984 https://youtu.be/nBqm1JwMcpw

smitty•3/17/23, 1:33 PM

neat stuff, i've used linear servos from LinMot in a machine once. i remember them being pretty expensive. https://linmot.com/products/linear-motors/linear-motors-p10/
https://www.youtube.com/watch?v=OHUhRe30i4w
if i remember right, when you Estop these things, they will just drop !

LinMot EN

Linear Motors P10 - 3x400VAC

The P10 series have been deliberately equipped with standard encoders and temperature signals which can be read by nearly all third-party drives.

YouTubeLinMot & MagSpring

LinMot High Speed

LinMot High Speed

**

Visit LinMot on
Website: https://bit.ly/3LpGmsU
LinkedIn: https://www.linkedin.com/company/nti-ag-linmot-magspring

ddaniel414•3/17/23, 5:43 PM

If anyone needs ideas for what to do with their gunfighter after they get their rhino, I decided to convert mine to a collective with a motorcycle steering damper. Works pretty well. Also can be pushed to the side a little bit if I want my throttle closer when flying planes. Have two throttle mount locations using some steering wheel quick releases.

Ye Old Grog•3/18/23, 2:08 AM

Interesting

Ye Old Grog•3/18/23, 2:09 AM

@propeler3d that's cool. So mechanically simple

VVPforceBot :package: 🇺🇸 **RHINO #0051** Has Shipped!

Fred•3/18/23, 5:26 PM

Heh, this was mine and I've had it for a while

Fred•3/18/23, 5:29 PM

Though, the monstertech plate isn't really usable with a desk mount - well made, just too high, even with a low desk. Plate itself seems well made, now waiting for monstertech to ship a chair mount

IIRC I saw a suggestion for mounting the rhino from above (but search is failing me now) - that seems like it would make it usable with monstertech desk mounts

FFred Though, the monstertech plate isn't really usable with a desk mount - well made,...

amadeus•3/18/23, 7:39 PM

I mounted to the chair just fine with a bit of creativity with existing parts (obviously need the plate which you already have)

Fred•3/18/23, 7:40 PM

Yeah, I could hack it, but want a trustworthy quick release on it - not got the space for a dedicated flight-sim-only chair

amadeus•3/18/23, 7:41 PM

Oh ic, I assumed you had this chair already

Fred•3/18/23, 10:24 PM

I have the chair, but not a good way to attach with a heavy duty quick release

amadeus•3/18/23, 10:32 PM

i think technically it is quick release -- just have to un-twist these two guys and life it off

amadeus•3/18/23, 10:33 PM

(it is quite heavy with the rhino on it though)

Fred•3/18/23, 10:36 PM

The circled parts and bracket are the parts I’ve ordered - they don’t come with the chair

MarshmallowBBQ•3/19/23, 2:25 AM

Anyone knows the lead time for motors kit?

MMarshmallowBBQ Anyone knows the lead time for motors kit?

PiNKSH!T•3/19/23, 3:53 AM

Not long at all m8, I think Walmis can ship them out within a couple days

Aamadeus I mounted to the chair just fine with a bit of creativity with existing parts (o...

mork•3/19/23, 7:06 AM

Did you flip the top plate of your Virpil gear to get the connector at the bottom?

amadeus•3/19/23, 8:45 AM

You can basically just unbolt the sides and flip. Usually requires intentionally positioning the cable around and through stuff to get it to route properly, but pretty easy overall

ummo•3/19/23, 10:23 AM

@walmis do you have any plans to expand manufacturing capacity / turn this in to a more "serious" business?

Uummo @walmis do you have any plans to expand manufacturing capacity / turn this in to...

walmis•3/20/23, 9:01 AM

What's the amount of units per month to qualify as serious?

Wwalmis What's the amount of units per month to qualify as serious? 😄

JakeSixx33 | 744 |•3/20/23, 4:00 PM

The amount to get to their number in "two weeks".

Wwalmis What's the amount of units per month to qualify as serious? 😄

ummo•3/20/23, 7:32 PM

easy, 20+

Uummo @walmis do you have any plans to expand manufacturing capacity / turn this in to...

Beamer•3/20/23, 7:47 PM

He's doing it right solo. No employees = no BS

amadeus•3/20/23, 7:49 PM

lmao, lad drops in, expects immediate change

Will3D•3/20/23, 7:58 PM

I just tried XPforce and MSFS for the first time. I don't seem to be getting any real effects once in the air. I expected the stick to tighten when going fast, and become slack during a stall. But nothing. What am I missing ? I feel lots of wheel vibrations on the ground.

SwiftVengeance•3/20/23, 8:05 PM

is xpforce supposed to do that?

Will3D•3/20/23, 9:16 PM

I don't know! I would have thought it could. The Brunner software looks at airspeed and changes tension based on it. I assumed this might do similar. Otherwise what actually DOES it do ?? Currently mine only reacts on the ground. Once airborne there is nothing...

FlatSpin•3/20/23, 9:41 PM

It could if vpforce supported telemetry from msfs I would assume.

Will3D•3/21/23, 12:59 AM

Turns out it was conflicting with the VJoy driver. Uninstalled and now it works.

Will3D•3/21/23, 12:59 AM

However it is a bit odd in the way it works. Not really like I had hoped.

Will3D•3/21/23, 1:54 AM

What’s the chance someone can write the same as the DCS script for msfs??

Will3D•3/21/23, 2:05 AM

I also notice slight cogging with these motors. I thought they would be completely smooth. Is there anything that can be done? This is with the 86BLF04 btw.

Will3D•3/21/23, 5:01 AM

Interestingly, when I had the motors on the bench and just used a shifter on the shaft directly they were silky smooth. Is it due to them now being geared? And the motor having to rotate 1+ times ?

BBeamer He's doing it right solo. No employees = no BS

walmis•3/21/23, 6:04 AM

Not quite solo, I have a few freelance employees, otherwise it would be too much stuff to do solo

@ummo 15 units were shipped in February, so getting close

Though there are some supply bottlenecks that are being worked on.

WWill3D I also notice slight cogging with these motors. I thought they would be complete...

walmis•3/21/23, 6:06 AM

I guess it's felt more when you move the stick faster?

Wwalmis I guess it's felt more when you move the stick faster?

Will3D•3/21/23, 6:09 AM

Actually the opposite. Seems to be more pronounced when moving slow

walmis•3/21/23, 6:16 AM

What's the gearing ratio on your's?

Will3D•3/21/23, 8:45 AM

5.7:1

VPforceBot•3/21/23, 12:13 PM

:package:

RHINO #0063 Has Shipped!

VPforceBot•3/21/23, 12:54 PM

:package:

RHINO #0064 Has Shipped!

Viktor Martin•3/21/23, 12:57 PM

Viktor Martin•3/21/23, 1:03 PM

I got 124 more to go apepehehe

Keep up the good work walmis, lotta respect o7.

Polack-1•3/21/23, 1:59 PM

https://tenor.com/view/theastropub-paul-shelley-star-citizen-imastarcitizen-twitch-gif-24927446

Tenor

VViktor Martin I got 124 more to go <a:apepehehe:947600148299649074> Keep up the good work wal...

Polack-1•3/21/23, 2:07 PM

Oh damn, the time has come!
I've been there, Viktor. Not in the triple digits, but still. Triple digits of days, lol

Viktor Martin•3/21/23, 2:08 PM

Viktor Martin•3/21/23, 4:48 PM

Time will come. I don'tmind the wait at all, no point in rushing excellence.

(I'm just seeing the edit now)

PPolack-1 Oh damn, the time has come! I've been there, Viktor. Not in the triple digits, b...

Stoned Kakapo•3/21/23, 5:14 PM

Try the huey and/or any warbird first once you test it out. You'll instantly fall in love again (cus you'll probably fall in love with the unboxing

) then try the F5/mirage F1 next

Polack-1•3/21/23, 5:23 PM

Oh I'm gonna go through every single module

skyPickle•3/21/23, 5:34 PM

FYI, I got my Rhino months ago (#37). FEDEX just sent me a bill for $35 labeled 'duty tax'. Is this really a thing? Did everyone else here get this? Or is FEDEX joining the rest of the corporate profiteers?

SskyPickle FYI, I got my Rhino months ago (#37). FEDEX just sent me a bill for $35 labeled ...

Polack-1•3/21/23, 5:40 PM

Huh, where are you based? Outside EU? FedEx brings US to mind. It's possible FedEx paid customs fee or something like that on your behalf and you got the notice only now.

https://youtu.be/nBqm1JwMcpw

Similar Threads