You can increase it to 9A, but the PSU might drop out on sudden changes in power and motors will rep

You can increase it to 9A, but the PSU might drop out on sudden changes in power and motors will report Undervoltage fault. So keep that in mind

It might work fine too though.

Mmechsicko 2 things that occurred to me that could be an issue.. one is if your printer is ...

Will3D•3/28/23, 4:43 AM

The print finished. Unfortunately it's the same! Good news is it's not my ( or yours) design, but something else. Probably the 3D printer. I'll take some measurements and try a calibration print later. But I think it is a small error that is accumulated across the teeth.

Wwalmis You can increase it to 9A, but the PSU might drop out on sudden changes in power...

Polack-1•3/28/23, 10:20 AM

Ah, I see. Thanks!

VPforceBot•3/29/23, 11:22 AM

:package:

RHINO #0068 Has Shipped!

VPforceBot•3/29/23, 11:22 AM

:package:

RHINO #0069 Has Shipped!

Asdforce•3/29/23, 11:50 AM

Nice

VVPforceBot :package: 🇺🇸 **RHINO #0069** Has Shipped!

DeltaVJ•3/29/23, 12:00 PM

Lucky guy

VPforceBot•3/29/23, 12:30 PM

:package:

RHINO #0070 Has Shipped!

Knight59•3/29/23, 4:04 PM

Wow, production is really ramping up. Great work guys!

Jaeger•3/29/23, 4:46 PM

So you are saying I should order a second one

JJaeger So you are saying I should order a second one🤔 😉

amadeus•3/29/23, 4:46 PM

One for the left hand, one for the right, obvi

Polack-1•3/29/23, 5:50 PM

is there a short write up of how to add effects and options available in Telem script?

JJaeger So you are saying I should order a second one🤔 😉

Fred•3/29/23, 6:53 PM

Yeah, you need an FFB collective

WWill3D The print finished. Unfortunately it's the same! Good news is it's not my ( or y...

mechsicko•3/29/23, 8:47 PM

Not sure what printer you have, but outside a scant few most need tuning in all axes before they print dimensionally accurate. I had to make pretty big changes before mine would reliably print to dimension. Start by calibrating the extruder axis, then extrusion width, then x/y/z. I used Pronterface to read/write settings to my printer's firmware, following this guide: https://all3dp.com/2/how-to-calibrate-a-3d-printer-simply-explained/

All3DP

3D Printer Calibration: How to Calibrate Your 3D Printer

Check out our 3D printer calibration guide to learn how to calibrate your 3D printer and fine-tune your slicer settings!

Mmechsicko Not sure what printer you have, but outside a scant few most need tuning in all ...

Will3D•3/29/23, 9:42 PM

For these prints I used a Flashforge creator 3, mainly as I can print 2 pulleys simultaneously. It's previously shown to be dimensionally accurate, however I admit I don't think I've ever run a calibration cube on it. Being a closed system I can't use Pronterface. But it should be better than most i3 style clones out the box.

Pebel&•3/29/23, 10:48 PM

Can you order kits and what do they come with?

Pebel&•3/29/23, 10:48 PM

if they exist

PPebel&if they exist

mechsicko•3/29/23, 11:44 PM

Rhino kits? Yes they exist, the wait is short and it's the 2 motors (with the drives already sorted) and the mainboard everything plugs into that plugs into the computer.

https://discord.com/channels/965234441511383080/986474224241741884/986485131906809866

Mmechsicko Rhino kits? Yes they exist, the wait is short and it's the 2 motors (with the dr...

Pebel&•3/30/23, 12:32 AM

Are files available to laser cut our own parts?

PPebel&Are files available to laser cut our own parts?

aniron•3/30/23, 6:16 AM

I don't believe so. Okona is working on a full DIY kit to go with the VPForce motor kits, but if I am not mistaken he is going to produce and sell them.

PPebel&Are files available to laser cut our own parts?

AsBurli•3/30/23, 9:37 AM

https://github.com/mabo1972

GitHub

mabo1972 - Overview

mabo1972 has 3 repositories available. Follow their code on GitHub.

AsBurli•3/30/23, 9:40 AM

@will3d good guide for 3D printer tuning https://ellis3dp.com/Print-Tuning-Guide/
This is actually for the VORON printers but can also be applied to most others.

Ellis’ Print Tuning Guide

Welcome!

Ellis’ Print Tuning Guide

PPebel&Are files available to laser cut our own parts?

TheAmazinGreat•3/30/23, 11:11 AM

The GitHub that AsBurli linked for mabo1972 and a few other options you might find are built for the 57BLF size motor kits. If you buy the bigger motors (86BLF) you will need to modify the files or design your own.

PPolack-1 is there a short write up of how to add effects and options available in Telem s...

GarrafaBr•3/30/23, 11:19 AM

I would like to know that too. By copying the weapon_release effect I added a very simple feedback for the flaps on all Jet Aircrafts using the aircrafts.py file (not realistic at all :D). But when I tried to add Landing gear transition and airbreak (which I believe are their status values - noted in Purple on the picture) I was unable to do. I am too dumb to understand any of this and I just "monkey see monkey do" with the already added effect. Maybe someone more clever can use the Runway_Rumble or the Buffeting telemetry as a model to help us implement the others.

Polack-1•3/30/23, 11:26 AM

Ah, ok, I downloaded the executable release (which works fine), should've gone for the script version, I guess?

GGarrafaBr I would like to know that too. By copying the weapon_release effect I added a ve...

Polack-1•3/30/23, 11:28 AM

I'm going to try sink my teeth into it on Sunday, hopefully. Should it skip my mind, ping me and I'll share my findings.

PPolack-1 I'm going to try sink my teeth into it on Sunday, hopefully. Should it skip my m...

GarrafaBr•3/30/23, 11:30 AM

Awesome, good luck. There are soo many opportunities with added effects :).

TTheAmazinGreat The GitHub that AsBurli linked for mabo1972 and a few other options you might fi...

Pebel&•3/30/23, 12:57 PM

thank you

AAsBurli @will3d good guide for 3D printer tuning https://ellis3dp.com/Print-Tuning-Guide...

Will3D•3/30/23, 6:07 PM

Thanks, I'll take a look. I did complete my calibration cubes. They turned out a little over sized. X - 20.1 Y - 20.08 Z isn't really an issue in this situation.

Will3D•3/30/23, 6:10 PM

So perhaps that .5-1% is what is causing the issue. Whilst I don't think I can tune that out in the printer, I can simply scale accordingly. Might be worth a shot.

WWill3D So perhaps that .5-1% is what is causing the issue. Whilst I don't think I can t...

TheAmazinGreat•3/30/23, 6:16 PM

Can you modify the steps/mm through the printers user interface? Is there a settings/advanced settings menu option? Most firmwares I have seen allow this so you don’t have to connect to a PC

PPebel&Are files available to laser cut our own parts?

mechsicko•3/30/23, 7:29 PM

There are a few out there, including the one walmis modified to make the stock Rhino from on github. There are a few iterations of Propeller's floating around but I don't have links off-hand.

As @.aniron mentioned I am developing a kit to accompany walmis's motor kits. My focus on 1. kinematics 2. form factor and 3. mounting options, and got the shell down to a 150mm cube that can be bottom/top/front or back mounted. I've been posting progress on in the showcase channel https://discord.com/channels/965234441511383080/972180323787997255/1087148842589360128

Pebel&•3/30/23, 7:30 PM

thank you for the resources

mechsicko•3/30/23, 7:34 PM

Another one to look into is LaserWing

TTheAmazinGreat Can you modify the steps/mm through the printers user interface? Is there a sett...

Will3D•3/30/23, 7:48 PM

I don't believe that is an option on the Flashforge UI.

RustBelt•3/30/23, 8:23 PM

You’ll probably have to go into G-code to do it. I had to with my little Monoprice Mini. Either direct USB injection or a lump of G-Code on an SD card to run.

Warwolf09•3/30/23, 11:52 PM

!status

WWarwolf09 !status

VPforceBot•3/30/23, 11:52 PM

Hey @warwolf09,
So the last Shipped RHINO is #0070 on 2023-03-29
Average waiting time from preorder to shipped is 147 days, median is 182 days, max is 214 days
70 Rhinos are shipped in total

RRustBelt You’ll probably have to go into G-code to do it. I had to with my little Monopri...

Will3D•3/31/23, 12:03 AM

Flashforge use proprietary code. So can’t do that.

inpayne•3/31/23, 12:58 AM

Does the a4 have any ffb capabilities?

Jon (Bounty_V)•3/31/23, 1:26 AM

if it did it would be the best community mod ever (not that it wasnt already but you know what i mean)

WWill3D Flashforge use proprietary code. So can’t do that.

RustBelt•3/31/23, 1:51 AM

https://github.com/markwal/GPX

GitHub

GitHub - markwal/GPX: Gcode to x3g conversion post processor

Gcode to x3g conversion post processor. Contribute to markwal/GPX development by creating an account on GitHub.

RustBelt•3/31/23, 1:52 AM

It’s not quite Proprietary, just a binary condensation of G-code.

JJon (Bounty_V)if it did it would be the best community mod ever (not that it wasnt already but...

inpayne•3/31/23, 4:32 AM

Just curious. I’m #76 so waiting patiently I should have my hands on one to try soon

Jon (Bounty_V)•3/31/23, 4:33 AM

yeah ive no clue if it does or not, would be amazing if so

inpayne•3/31/23, 4:33 AM

Also I’m sure I will figure it out soon enough. But do different airframes have different base setting profiles? How does that work…

Jon (Bounty_V)•3/31/23, 4:34 AM

i assume itd b based on what devs put

Jon (Bounty_V)•3/31/23, 4:34 AM

if ur talking dcs modules at least

inpayne•3/31/23, 4:34 AM

Yeah

Jon (Bounty_V)•3/31/23, 4:34 AM

im #98 so not too far behind

inpayne•3/31/23, 4:34 AM

I’ll download the software but been out of town for a couple weeks and will continue to be for another week or so. So was just curious while I’m on the road and can’t do anything anyway

You can increase it to 9A, but the PSU might drop out on sudden changes in power and motors will rep

Similar Threads