Hey m8, the motors have encoders inside them from my understanding
Hey m8, the motors have encoders inside them from my understanding
WYep, that's correct. No other axis sensing is required, which simplifies design a lot
TThanks! That’s what I thought. I have ordered a DIY kit… 
G
V
NOh my, it's a celebrity
LDoes Rhino support DX FFB?
WOf course
TAre there any drawings or measurments of the FFB motors?
Anybody got a good source for timing belts and pulleys?
Anybody got a good source for timing belts and pulleys?
MThere are, I also modeled them and have them as Fusion or step files if you need. Belts picked up through Beidler's Belts (Gates GT tooth, 5mm pitch... HTD belts are more common), small pulleys you can find on Amazon/Aliexpress etc and big ones you can print. I just posted some pics in the showcase channel of the small form factor version (150mm cube) I'm developing into kits to offer to go with walmis's kits.
TI have ordered the 86BLF04 motors. If you have STP files of those, that would be really helpful!
MNo I modeled the 57xxx motors. I am working on a kit for the bigger motors but for now am using a generic modeled Nema34 that's 95mm long I found on GrabCAD for free. At some point I'll model the driver segment walmis adds to them but this is the one I think https://grabcad.com/library/stepper-motor-nema-34-3
The GrabCAD Library offers millions of free CAD designs, CAD files, and 3D models. Join the GrabCAD Community today to gain access and download!
WYeah, it's basically standard NEMA34
W
JVPForce Invoice -- I've never been so keen to pay the man. I'm really excited
OHi All,
I’m thinking of placing an order in the next few days but before I do, can someone provide some idea of how ‘smooth’ the force feedback/range of joystick motion is? For those that have tried FFB steering wheels, is the Rhino more like a Fanatec direct drive wheel or like the Logitech G920?
Thanks!
I’m thinking of placing an order in the next few days but before I do, can someone provide some idea of how ‘smooth’ the force feedback/range of joystick motion is? For those that have tried FFB steering wheels, is the Rhino more like a Fanatec direct drive wheel or like the Logitech G920?
Thanks!
RHaven't tried the DD steer wheels, but I have had experiences with MSFFB2 and Logitech G940. Rhino's motor are SMOOTH. You are not going to notice the cogging.
NYouTubeAntti Ilomäki
Remember I don't have a lot of stick time on the Rhino, this is just a first look. Also don't take too seriously, I kind of got carried away.
00:00 Intro
01:12 Can you feel the motors and gears in a bad way?
06:42 How strong is it?
11:48 But does it have endurance?
14:04 How does it actually feel?
16:30 I get all excited as my stick gets stiffe...
00:00 Intro
01:12 Can you feel the motors and gears in a bad way?
06:42 How strong is it?
11:48 But does it have endurance?
14:04 How does it actually feel?
16:30 I get all excited as my stick gets stiffe...
NCredit to @andyhill I think
NHe gets into the cogging feel in the first few minutes
AI don't have experience with DD wheels so I can't really say much about that
Ait's hard to describe what the rhino feels like
Afirst of all, I have never used a joystick where I couldn't feel the mechanism at all and I have tried a lot of them
Ayou can feel the mechanism working on the rhino as well, but it doesn't feel clunky at all
Aall in all for me the total feel of the Rhino, free from the tyranny of springs, is just so different compared to non-ffb sticks that whatever you can feel of the mechanism working just kind of adds to the feel of pulleys and levers working on actual control surfaces
JIt'll be 10+ months before you would be asked to put money down - sooner you get in line sooner you'll get yours and you can leave the line at anytime
RI’m number 88. Can’t wait
JI'm 98
NI’ll sign up too, worst case scenario I have to pass and it just goes on to the next person waiting patiently
NWhat’s the mounting situation on a MonsterTech base? I see the adapter in the form but is it functionally fine with the force feedback and such?
AI don't know about the Monstertech base, but whatever your solution, it will need to be solid through and through. The Rhino weighs over 5kg, but that's just the start. It's going to push and pull and shake and rattle a lot if you use it at high settings. My gut feeling is that aluminum profile -based setups (like I think monstertech is) are fine as long as they are very solidly attached to something really sturdy and heavy
II’m about to hook mine up to a monster tech desk mount. We’ll see how it does. I can post in a day or two
ANo issues yet
M
same
KIt feels as smooth, if not smoother than a high end non ffb base, such as the Virpil WarBRD. Yes, that smooth! I was a skeptic until I got mine, too. You will be pleased.
NAlright noted, the standard table-mounted MonsterTech probably isn’t gonna do then
L
is SMOOooth........ 
I fly VR only and I can't tell whether it's sticking up in some viscous fluid or suspended by 
sLYes, smoother than Gunfighter MK II (which is a smooth base)
IJust got home to check mine out. Looks really nice. Unfortunately with the monstertech mount it doesn’t come with hardware. So gonna have to run to the hardware store before I can try it
AWhat’s missing from what they sent you?
IBolts and nuts to connect to the base. But no big deal really. I guess I’m not really sure if that’s to be expected or not.
TFreejoy?
WYeah, it's a good idea to start adding those along it with the plate
Gjust a question, how does the FFB feel with 200mm Virpil's extension?
AHow odd, those have always been included when I’ve ordered
MGood but I wouldn't turn down having stronger motors
Gand is it possible to modify Rhino's with a stronger motor?
MThere's a kit you can use to start making your own with stronger motors. A lot of inventive people here have taken a myriad of approaches with them
INo biggie. But yeah doesn’t hurt!
J!status
