it is a nice grip, but can't be attached to anything other than AK (unless you modify)
it is a nice grip, but can't be attached to anything other than AK (unless you modify)
Pyeah that's something that's kept it on the back burner for me, just need someone to make a TM adapted version then we'd be set, guess I could try frakenstine some Yak type controls onto the spitfire grip?
TThe Russian spade grip was something I always wanted to model but had a hard time finding dimensions/specs. I always marveled at how Replika did it. Maybe he was like the bf109 guy from the AK discord who has access to a 1:1 plane and was able to go sit in the cockpit to take dimensions.
TI even considered trying to pull a model from the IL2 game files but got burned out researching and sidetracked on another project
IIs the base sensitive enough to set up a f16 setting in the future? Like have it full stiff centered, and it could move like a psuedo fsb?
WYeah, it's possible to tweak it enough with the current implementation so it's a pseudo fssb. The trick is to get it stable enough so it doesn't oscillate 
NHow would that work? By the motors detecting how much resistance they have to provide for the stick to not move, maybe?
LHey guys. I just put through a reservation. There was a category called accessories. Is that accessories that will come with the base or which accessories we already have?
TIt should be what you want to come with it.
LThank you kind sir
TNo problem, welcome to the team!
WYou would set a very small movement range and the spring force would be proportional to throw
NSo it'll still have physical movement, not just force against the motors?
WYeah you would still have some physical movement
NAh alright, still pretty cool that it can emulate it to an extent
NIs the software aware of how much force the motors are applying?
Wyeah, motor Amps == Torque
Nwould be kinda fun to see if it could be emulated through the software then, but I probably don't have the know-how
Pwell that's all good, it's supposed to move a little bit, the F16 side grip moves a little bit
NI think the F-16 stick moves due to feel, since it felt too unnatural for it not to give any response at all
Pyeah that's what I've heard in different docos etc. the force sensing stick was different enough for some pilots & to add on top the stick didn't move at all it ended up being changed to move a few mm in the x & y axis
Lhey @walmis, lee from ars technica here - apologies for the bother, but would it be possible to swap a few e-mails back and forth? i've got a preorder in and I'm interested in reviewing the VPForce on Ars, and wanted to be able to send a few questions your way.
L(no worries if not, I don't want to be a pest or anything!)
T@walmis how do you connect the kill switch? Does it cut the power from the power supply, or just the power to the motors?
WIt kills the positive line from the power supply
WSure, shoot me a DM
DYouTubeAirlinePilot2008
I had some extra time while performing an engine run on one of our jets in Iraq, so I ran a flight control self test just to weed out any problems and ensure that everything else was ready to go on the jet so we could return it to service for its next mission. Once I "warm up" the flight controls and engage the self test, the flight control comp...
DYouTubeaviatrix99
USAF Female F-16 pilot Capt Zoe Kotnik describes the throttle and stick of viper
44271072 503928186753791 7446556720417262154 n
44271072 503928186753791 7446556720417262154 n
MNo arguments that the stick isn't ideal for the F-16. But, given that it's the only joystick I currently use, and can't be used without the power on, I wanted to see whether the issue I had was in my setup or in the module. Anyone else experience different spring force for the F-16 in pitch vs roll?
Susing the lateswt telem. Is there a solution to this error in the cmd window:
S2023-04-14 20:42:25 - INFO - Open Rhino HID FFFF:2055
2023-04-14 20:42:25 - INFO - Listening on UDP :34380
Exception in thread Thread-2:
Traceback (most recent call last):
File "C:\Python311\Lib\threading.py", line 1038, in _bootstrap_inner
self.run()
File "F:\Dropbox[DCS\Joysticks\VPforce-TelemFFB\main.py", line 163, in run
config.reload()
^^^^^^
NameError: name 'config' is not defined
2023-04-14 20:42:25 - INFO - Listening on UDP :34380
Exception in thread Thread-2:
Traceback (most recent call last):
File "C:\Python311\Lib\threading.py", line 1038, in _bootstrap_inner
self.run()
File "F:\Dropbox[DCS\Joysticks\VPforce-TelemFFB\main.py", line 163, in run
config.reload()
^^^^^^
NameError: name 'config' is not defined
Sgot that error trying to fly the Dora
WDCS for some reason sets spring coefficients that way.
WMost likely it failed to find the config ini file for some reason
KHi, I want to integrate my custom joystick grip into the Rhino base... Shift register would be the easy route, but it´s not suitable for me as I also have thumbsticks on it which gives potentiometer values that I would like to use. Shift register is just an "on/off". Is there an "protocol" that I can use to send data from an Arduino via SPI to the Rhino?
T@walmis what specs should the emergency kill switch have? I’m considering using a latching normally closed push button.
Wit should handle around 4A avg, 10A peak
PHey Walmis m8 what's an "average" temp for the motors for use over a few hours, not sustained hard forces the entire time but steady use with burst of hard usage (typical flight sim use really)? Would the mid 40° be alright?
TCheck out this reply and my other comment below it. This may help you, if you want to do your own Arduino SPI slave, I can help.
📃general
📃general
KWell, I already have everything wired up with an Arduino. I want to bring this into the Rhino to have an complete unit without the need to run additional cables and configure another joystick... So things get more cleaner and I only have "one" device to configure
TDoes your arduino communicate with your PC via USB?
Kyup, it does
Kbut would be neater to have it all integrated into the Rhino itself
TJust wanting to understand your setup so I can answer your question as best as possible. So you use the Rhino connected via USB and your custom grip is connected via a second USB. Is that right?
KExactly
TSo there is a way that you can reconfigure the Arduino and shift register to work in series and both send data to the Rhino via SPI through a single connection just like a Virpil stick. The shift register sends the digital data (buttons) and the Arduino send the analog data (thumbsticks).
KBut there is no need for the Shift Register... you can tell the Arduino to send it out like an shift register
TThat's true, I realized I misread your original message and thought you had a shift register talking to an Arduino already. If it's just buttons and axes going directly to an Arduino, you just need to write the sketch so the digital and analog data get sent out over SPI but your number of buttons would be limited by your Arduino pins. If you are already using the Arduino though, I'm assuming your input count is sufficient for your button count already.
KEverything is working so far, all buttons I need.... I just want to bring it into the Rhino. Which is just some buttons but two thumb sticks...
KEverything happens on one Arduino Micro so far
WThere was this discussion with @theamazingreat , you can use this structure to send out over SPI
🧰support
🧰support