If you’re in the US, I have an extra Debolistis ProMicro to SPI break out board i can send you as i
If you’re in the US, I have an extra Debolistis ProMicro to SPI break out board i can send you as i had to order 3 from OSH park.
SI still have 2 more 64 input boards I haven't soldered up yet
RIt’s this one, because a blue pill is overkill for buttons. https://oshpark.com/shared_projects/Bp6mCRsf
RWith the inland or amazon rando copies of the ProMicro it’s way cheaper for just buttons
RTheir even labeled in Thrustmaster wire color for extra lazy
SMy blue pills were super cheap
SAh I see.
RI get my pro micros for $9.99 at Microcenter. Cause I’m spoiled by being near one.
SThink I got a 5 pack of blue pills for 15$
RBut either works. Especially if you already have one
RWow!
RGood deal
SI like the FreeJoy project because it's still active and updated, MMjoy is now abandoned
RYea I’ll probably switch when I run out of pro micros. Or need faster sharper input
SMy blue pills are generic STM32's but still work
RSTM32, are super handy. I use them for real-time data in my race car.
RMuch more versatile than ATmega32s
SI used to program Atmel Megas in C, before Arduino's were a thing
SNow 8bit MCu's are ancient and everyone just uses 32 bit even for simple things
RThey’re cheap enough and pumped out at scale
SOpen source has changed everything, the collective brain power of thousands allows for so much more than anything I could have done on my own
RYea it’s great, half the stuff I have and make only would ever happen due to open source
RIt’s a good time to be a maker. If raw material costs would just calm the heck down….
SMy 3D printers have made my machine shop collect dust. But If I go make rudder pedals, I'll clean up my shop and do it out of metal
SBut material cost is so cheap with 3D printing, it really makes it hard to step away from 3D printing
RYea but sometimes wood or metal is the only thing to do the job.
SYes,.agreed
SPlastic will always have much more "elasticity" than metal
Pyou would likely want the bigger sized motors then
SCan someone please tell me what FFB effects we have with the Rhino in Modernjets
Phey m8, I use the VKB MCGU & 200mm curved extension on the Rhino base & it feels awesome for jets & heli's I use the much lighter VKB KG12v2 grip for warbirds & GA/Bush planes. It is noticeable when I switch out the heavier mcgu for the Kg12 having less leverage or weight gives the stick a slightly different feel which to me suits warbird/GA better. All 'n all the Rhino is awesome & things like helicopters feel so much better, having force trim working is game changing! Also the ability to customize the base per aircraft via config files is just as cool.
G!stats
VHey @guicans,
So the last Shipped RHINO is #0079 on 2023-04-12
Average waiting time from preorder to shipped is 154 days, median is 191 days, max is 216 days
78 Rhinos are shipped in total
So the last Shipped RHINO is #0079 on 2023-04-12
Average waiting time from preorder to shipped is 154 days, median is 191 days, max is 216 days
78 Rhinos are shipped in total
S@pinksht that's what I'm thinking
PDon't get me wrong, the standard sized motors on the Rhino are powerful, 9Nm peak torque is no small amount, just thinking about the extra linkages/length connecting it up to two separate sticks, although something I'm keen so find out is; using the Telem app in a twin seat would two separate Rhinos act like they were linked?
WYeah I have this feature planned in the future
ASounds like someone is fixing to take the game of “whack! Fuck!” into flight sims?
A
JI can't wait for the CH-47 in DCS specifically for this feature
L@guicans nice to see you here bro
IMost of the modern jets are fbw so not a whole lot. -a lot of the Cold War planes are supported well. Warbirds and helicopters especially are beneficial with the ffb. The modern jets it just becomes basically a high end spring stick. It’s very versatile.
PAs inpayne has stated, most of the more modern jets are Fly-By-Wire, but in DCS the ffb effects depend on the module maker, otherwise you can use the VPforce Telemetry App to give all aircraft basic ffb effects & you can further edit what effects are felt by each aircraft & at what points the effects are felt, although this isn't as easy as changing the Rhino base's config per aircraft, it can be done. Some of the effects might not be realistic eg. the FBW f-18 when using the telem app will give ffb effects for things like weapon release, guns, ground texture on taxi/takeoff, now some of those effects might come through the stick in a fbw jet, some might not, some effects might be felt more though the seat or the aircrafts body but it definitely adds to immersion.
PAlso just the amount of options for creating a unique feeling stick for each aircraft is one of the best things about the Rhino
JWhat is already available on offer is great, and I look forward to what the future holds for the Rhino and software
JGuys new plane to test in DCS, just added FFB support
VSo aviodev can implement ffb but razbums can't be bothered?
NMore likely that none of the razbam crew have an FFB stick
Jdont have, and dont know how or what its supposed to feel like is stated reasons
Jall of which are definitely fixable on their end they just cba
JThe only Razbam module I really really want is the M2000C, but there's so many other wonderful modules I already own to play around in first