which is the best power supply to buy for 57BLF03? how much Volt Watt and Amper i need to look?
which is the best power supply to buy for 57BLF03? how much Volt Watt and Amper i need to look?
WRhino has 180W supply, 19V ~ 10A.
You could look at Laptop PSUs or go with a Meanwell LRS-350-24, it's powerful for it's price, but bulky.
You could look at Laptop PSUs or go with a Meanwell LRS-350-24, it's powerful for it's price, but bulky.
SThis power supply will be able to work with 4x57BLF03 motor? Cause i am thinking of building full FFB pit. (cyclic, collective,pedals)
Wyeah, meanwell should handle it
Sthis board can handle 4 motors or i will need a second one? Or there is another board which supports 4 motors?
WYou would require two boards for 2 pairs of motors
SIs there a link to find the datasheet of the 57BLF03? to see the Dimensions?
YGoogle is your best bet
SHas anyone used FFB kit to a collective?
CIs it possible to drive the motors in the kit continuously? The reason is I want to ensure that my belt is seated properly and run my pulleys slowly for a few revolutions. Its a bit difficult to drive by hand in my arrangement.
LUnknown, but if someone did, they haven't posted about it here. 
WI think @keksstar made one
WUnfortunately that's a negative
SCan you share anything about it Keksstar?
EGreetings!
Is there a trick to get the WW adapter/grip working? Tried the adapter and it won't recognize the grip. Grip Type is set to WW Adapter.
The grip works when I plug the Orion 2 with the F18 Grip back in but not with the Rhino.
Is there a trick to get the WW adapter/grip working? Tried the adapter and it won't recognize the grip. Grip Type is set to WW Adapter.
The grip works when I plug the Orion 2 with the F18 Grip back in but not with the Rhino.
WHey! You can verify if the Rhino detects it by setting grip type to debug and checking the data it gives out in the debut tab. If it's all FFs then maybe it's not making contact.
EIt seems like there is a contact problem. Both ends do have firm contact though
[21:05:45.188] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:45.388] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[21:05:45.590] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[21:05:45.791] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FE 00
[21:05:45.991] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:46.193] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:46.393] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:46.595] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:46.796] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:46.997] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:47.199] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[21:05:47.399] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:47.601] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:47.802] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:48.003] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:48.205] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:48.405] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:48.607] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:48.808] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:49.010] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:49.212] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[21:05:49.411] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:45.188] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:45.388] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[21:05:45.590] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[21:05:45.791] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FE 00
[21:05:45.991] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:46.193] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:46.393] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:46.595] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:46.796] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:46.997] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:47.199] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[21:05:47.399] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:47.601] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:47.802] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:48.003] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:48.205] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:48.405] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:48.607] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:48.808] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:49.010] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[21:05:49.212] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[21:05:49.411] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WYeah looks like intermittent contact. Could you try to give gentle push on the din socket on the adapter after you seated it.
EIt seems to change nothing. The TM F18 Grip functions without error.
EJust connecting the adapter makes the array twitch from time to time too.
WYeah, it should end with 00 00 08 00 08 ...
Anyways, I'll get in touch tomorrow to help you solve this.
Anyways, I'll get in touch tomorrow to help you solve this.
EAlright, awesome. Thank you. 
CIs it please possible to get a pinout for the winwing grips to interface correctly with the rhino board?
WIt's not directly compatible, only via the WinWing adapter
C@walmis when you say winwing adaptor, you mean your adaptor or their adaptor? I have your adaptor but am building my own stick.
WAh, right.
WDMd
CBeautiful thankyou!
TI just got my Rhino and I love it! I am having an issue with the vkb black box where its flashing red and the blue light is also flashing. Is there any idea what could be wrong?
TNevermind I fixed it
LYeah the black box is just trying to say it no longer sees the X and Y axis. Mine's set like this:
JMay I post about a DCS server event we are hosting tomorrow in #
general ?
TYIA!
general ? TYIA!
WYeah, if it's not too late 
JThank you! not too late 
SCan someone please confirm this is correct for TM/virpil?
Been searching high and low and cannot find a definitive pinout.
Thanks!
Been searching high and low and cannot find a definitive pinout.
Thanks!
AHi, I noticed the emergency switch jumped out. How should I put it back?
Nah, upon looking, there's a metal ring inside the case that probably should connect.
Nah, upon looking, there's a metal ring inside the case that probably should connect.
RIs the end stops effects or throw limiter better for setting a end stop. Right now I’ve got the end stops effect clocked with axes reset and it seems to work fine.
RAlso the balance effects for keeping the grip centered. It works but only in one position. For example you tweak for holding center then use the force trim and move stick to high left. Now the new center sags because the balance effects was used for holding the center position. Not sure how it would but a dynamic balance effect to keep the stick truly centered would be nice.
RI also turned my master gain down to 90% and kept my knob at 75%. Does these effect each other.
RReally impressed so far and love it. Can’t fly till Monday how ever. Boo.
WNo, but that would be cool. Hydraulic failures!!
BHi =RS= ddrake1984, Is this your image of the Helicopter Pilot Seat and the RINO. This is how I have to install my RiINO when it arrives.
BFantastic. When installing the RINO this way did you have to make changes to its programming?
DOnly invert of Y axis
RAre you flying the 60 much, I just go tmy rhino installed. I'm hoping to use it tomorrow with DCS and want to get the 60 setup.
NDid you change the mapping in VPForce Configurator? It defaults to spring force, but you can change (or disable) it.
NI'd double check it.. If you somehow, intentionally or not, disabled the setting.. the knob will not beep when rotating it...
NPot 1 defines the function for the knob you are turning. By default it should be set to Spring Gain.
NPot 2 is not wired on the Rhino
Ndo you see the screenshot I just posted?