doesn't have the WRITE permission
doesn't have the WRITE permission
CEdit is the same as write
Sthen when I use this key instead of the global one, it gives auth error
Sbut when i do the response curl it works, any idea?
Snvm, got it, it was a bearer token 
Z- Whats the view on a series of writes to the same KV key, say just 1 seconds apart (eg a fussy user repeatedly tweaking and saving some config) and reading back? Is it guaranteed that the reads will show the same order as the writes in that region? Or a page full of settings / config, each of which autosaves into the same KV key when touched.
- Further, would this be considered bad practice? I understand KV is meant for massive reads and occasional writes.
B- It may work in a lot of cases, but there's no guarantee because KV is eventually consistent.
- The limit for writing to a single key is once per second. The system will error if you try to do it more frequently than that. While it's not a bad practice, if you have a lot of write volume overall (lots of different keys), we might start to rate throttle you (it's unlikely you'll be doing enough volume, but just keep that in mind).
BNot at this time, no. The system auto-purges on writes from upper tiers (https://blog.cloudflare.com/faster-workers-kv-architecture/). We've talked about it, but our current thinking is to work on exposing a tunable
refreshTtl.get
HAny plans to add a way to reset expiration when getting a value?
BWhat does this mean?
HSome way of adding
expirationexpirationTtlget()Changing the expiration requires a write and having read operations secretly write isn't a good idea for multiple reasons.
HNo, I mean that it would be explicit, like
get(“someKey”, {expirationTtl: 1800});So a get would never be implicitly be making any changes
BFrom the perspective of the system, it boils down to a HTTP GET. That it internally has custom parameters to say "but actually do a write" doesn't matter so much - you're asking for a read operation to secretly mutate.
The challenge with such a proposal is that the entire point of GETs is to be cached & not hit the underlying storage. If you specify the
If you need this behavior today, you could do something like:
Of course this is race condition prone and would need conditional uploads (not implemented at this time) or mediation through something like a DO.
The challenge with such a proposal is that the entire point of GETs is to be cached & not hit the underlying storage. If you specify the
expirationTtlIf you need this behavior today, you could do something like:
Of course this is race condition prone and would need conditional uploads (not implemented at this time) or mediation through something like a DO.
ZGot it. Is there any service in the Cloudflare offerings that can be used to create a debouncer in front of KV writes.
BDurable Objects. A common mechanism is to use DOs as the "ground truth" for storage operations & KV is the read path in front.
ZYup, I'm already using DOs for suitable use cases - multi-location sync / multi-user sync etc. But there's a lot of complexity etc involved with DO, whereas KV is very clean. So I'm wondering whether there is a way to debounce writes to KV. I though queues might be a way, but I dont suppose that would have such a feature either.
BBy debounce you mean to make sure the value is read/modify/write updated atomically in a safe way? Or something else
ZJust a simple way of reducing multiple writes to the same key to the last write once there is a pause. Eg
edit #1, save #1 - this produces a KV write
edit #2, save #2 - this produces a KV write
.
.
.
edit #5, save #5 - this produces a KV write, all within few seconds.
<pause>
A debouncer would just take the 5th KV write, since earlier superseded by #5. No read being done in this set of ops.
edit #1, save #1 - this produces a KV write
edit #2, save #2 - this produces a KV write
.
.
.
edit #5, save #5 - this produces a KV write, all within few seconds.
<pause>
A debouncer would just take the 5th KV write, since earlier superseded by #5. No read being done in this set of ops.
BAh. Queues is probably a nicer mechanism than DOs, although I don't believe it has any ordering guarantees which make things hard.
UQueues also doesnt really have any state so it wouldnt know when the last write to a specific key happened to debounce it properly. DOs would realistically be the only option to debounce writes like that.
Would also limit you to writing 128KB values unless you used multiple DO keys to save the value and then do a list or something
Would also limit you to writing 128KB values unless you used multiple DO keys to save the value and then do a list or something
UIf you are ok with the slight chance of losing some data I feel like the easiest option might be to just block the request until at least 1 second from the last write and if you have many requests come in a single second do a fake success return for the previous write and then only the latest value will be waiting for 1 second to then write to KV 
ZCertainly DO can be used - I'm already using it as a debouncer in some cases by setting and canceling+setting the alarm on each update, and the last set alarm will finally trigger. Thats how I handle a stream of actions generated within the DO, eg notifications. But was looking for a simpler more elegant way to do this with KV.
BUnfortunately not. You need to put a FIFO queue in front. Since queues doesn't yet have a FIFO mode, you'd need to roll it manually via a DO.
B@HardAtWork you maintain the BetterKV project, right?
HYeah, I do
BI think there's a performance issue. Do you want me to file a formal ticket on GitHub or just describe it briefly here?
HUh oh. You can send it here, then I’ll add it to GH and credit you there
HOr whichever way you prefer
HI need to add formalizing contributions to Flareutils to my evergrowing todo list…
BBasically the cacheTTL you use for the fronting cache is the same as the cacheTTL for KV. This means that every time you read from KV it's a cold read whereas KV takes great pains to make sure that you never see cold reads for frequently accessed keys.
The latest version of the PR isn't building, but I'm working on docs providing guidance:
https://vlovich-kv-advanced-guide.cloudflare-docs-7ou.pages.dev/workers/learning/advanced-kv-guide/#avoid-hand-rolling-cache-in-front-of-workers-kv
I think a good change to BetterKV that follows the recommendation while cutting costs is:
The latest version of the PR isn't building, but I'm working on docs providing guidance:
https://vlovich-kv-advanced-guide.cloudflare-docs-7ou.pages.dev/workers/learning/advanced-kv-guide/#avoid-hand-rolling-cache-in-front-of-workers-kv
I think a good change to BetterKV that follows the recommendation while cutting costs is:
- Set the cache TTL in the fronting cache to ~40-50 seconds (regardless of the cacheTTL the user is requesting from KV).
- Have 1% of cache hits do a KV.get anyway in a wait until (+ update your cache with the updated value & extend the 40-50 second deadline out further).
This guide provides best practices for optimizing Workers KV latency as well as covering advanced tricks
that our customers sometimes employ for their …
that our customers sometimes employ for their …
BAlso, please add a note saying that the fronting cache is incompatible with future KV improvements to allow reducing the the refreshTTL < 60s.
BThis change would achieve both goals.
BNote that this change also saves you more money. Because you're sampling at 1%, you will have a small number of requests that end up going through to KV & updating the value you have cached. The current behavior has a stampeding herd every 1 minute where ALL requests suddenly go to KV.
BYou can make the sampling threshold and the fronting cache duration tunable but cap the fronting cache duration at 50-55s at most. I would also make sure to call out in the docs that customers should set long cacheTTL as described in that document.
BAnd ultimately my goal is for there to be no pricing difference of putting the Cache API in front, but we're still a ways away from realizing that vision. We're working on making KV faster than the cache API first.
BMy goal is to win the bet & get Sid (TL for pages) to shave his head bald if we hit certain performance milestones
B(We have a grafana panel tracking that)
JIf this happens, Sid is obligated to come to our next meetup bald
HVery good point. Skye is correct that performance is not the #1 priority for BetterKV, pricing is, but I do also definitely see your point. I’ll probably add your suggestions as a performance mode that people can enable
BIt's also net a cost savings. Would you be open to making it the default & the user needing to turn it off? Even if you don't want to do the probabilistic piece, can you shorten the cacheTTL so that it's under what you give KV? Otherwise, BetterKV is not really different than cache+R2.
WI can't wait for this
HQq, what’s your username on Discord, so I can credit you for the changes?
Bvlovich
BOh that's my github username
Bbeelzabub#0369 on Discord
HWait
HNo, I meant GH
HI guess I’m just brain-tired from the heat…
