Got it. Is there any service in the Cloudflare offerings that can be used to create a debouncer in f
Got it. Is there any service in the Cloudflare offerings that can be used to create a debouncer in front of KV writes.
BDurable Objects. A common mechanism is to use DOs as the "ground truth" for storage operations & KV is the read path in front.
ZYup, I'm already using DOs for suitable use cases - multi-location sync / multi-user sync etc. But there's a lot of complexity etc involved with DO, whereas KV is very clean. So I'm wondering whether there is a way to debounce writes to KV. I though queues might be a way, but I dont suppose that would have such a feature either.
BBy debounce you mean to make sure the value is read/modify/write updated atomically in a safe way? Or something else
ZJust a simple way of reducing multiple writes to the same key to the last write once there is a pause. Eg
edit #1, save #1 - this produces a KV write
edit #2, save #2 - this produces a KV write
.
.
.
edit #5, save #5 - this produces a KV write, all within few seconds.
<pause>
A debouncer would just take the 5th KV write, since earlier superseded by #5. No read being done in this set of ops.
edit #1, save #1 - this produces a KV write
edit #2, save #2 - this produces a KV write
.
.
.
edit #5, save #5 - this produces a KV write, all within few seconds.
<pause>
A debouncer would just take the 5th KV write, since earlier superseded by #5. No read being done in this set of ops.
BAh. Queues is probably a nicer mechanism than DOs, although I don't believe it has any ordering guarantees which make things hard.
UQueues also doesnt really have any state so it wouldnt know when the last write to a specific key happened to debounce it properly. DOs would realistically be the only option to debounce writes like that.
Would also limit you to writing 128KB values unless you used multiple DO keys to save the value and then do a list or something
Would also limit you to writing 128KB values unless you used multiple DO keys to save the value and then do a list or something
UIf you are ok with the slight chance of losing some data I feel like the easiest option might be to just block the request until at least 1 second from the last write and if you have many requests come in a single second do a fake success return for the previous write and then only the latest value will be waiting for 1 second to then write to KV 
ZCertainly DO can be used - I'm already using it as a debouncer in some cases by setting and canceling+setting the alarm on each update, and the last set alarm will finally trigger. Thats how I handle a stream of actions generated within the DO, eg notifications. But was looking for a simpler more elegant way to do this with KV.
BUnfortunately not. You need to put a FIFO queue in front. Since queues doesn't yet have a FIFO mode, you'd need to roll it manually via a DO.
B@HardAtWork you maintain the BetterKV project, right?
HYeah, I do
BI think there's a performance issue. Do you want me to file a formal ticket on GitHub or just describe it briefly here?
HUh oh. You can send it here, then I’ll add it to GH and credit you there
HOr whichever way you prefer
HI need to add formalizing contributions to Flareutils to my evergrowing todo list…
BBasically the cacheTTL you use for the fronting cache is the same as the cacheTTL for KV. This means that every time you read from KV it's a cold read whereas KV takes great pains to make sure that you never see cold reads for frequently accessed keys.
The latest version of the PR isn't building, but I'm working on docs providing guidance:
https://vlovich-kv-advanced-guide.cloudflare-docs-7ou.pages.dev/workers/learning/advanced-kv-guide/#avoid-hand-rolling-cache-in-front-of-workers-kv
I think a good change to BetterKV that follows the recommendation while cutting costs is:
The latest version of the PR isn't building, but I'm working on docs providing guidance:
https://vlovich-kv-advanced-guide.cloudflare-docs-7ou.pages.dev/workers/learning/advanced-kv-guide/#avoid-hand-rolling-cache-in-front-of-workers-kv
I think a good change to BetterKV that follows the recommendation while cutting costs is:
- Set the cache TTL in the fronting cache to ~40-50 seconds (regardless of the cacheTTL the user is requesting from KV).
- Have 1% of cache hits do a KV.get anyway in a wait until (+ update your cache with the updated value & extend the 40-50 second deadline out further).
This guide provides best practices for optimizing Workers KV latency as well as covering advanced tricks
that our customers sometimes employ for their …
that our customers sometimes employ for their …
BAlso, please add a note saying that the fronting cache is incompatible with future KV improvements to allow reducing the the refreshTTL < 60s.
BThis change would achieve both goals.
BNote that this change also saves you more money. Because you're sampling at 1%, you will have a small number of requests that end up going through to KV & updating the value you have cached. The current behavior has a stampeding herd every 1 minute where ALL requests suddenly go to KV.
BYou can make the sampling threshold and the fronting cache duration tunable but cap the fronting cache duration at 50-55s at most. I would also make sure to call out in the docs that customers should set long cacheTTL as described in that document.
BAnd ultimately my goal is for there to be no pricing difference of putting the Cache API in front, but we're still a ways away from realizing that vision. We're working on making KV faster than the cache API first.
BMy goal is to win the bet & get Sid (TL for pages) to shave his head bald if we hit certain performance milestones
B(We have a grafana panel tracking that)
JIf this happens, Sid is obligated to come to our next meetup bald
HVery good point. Skye is correct that performance is not the #1 priority for BetterKV, pricing is, but I do also definitely see your point. I’ll probably add your suggestions as a performance mode that people can enable
BIt's also net a cost savings. Would you be open to making it the default & the user needing to turn it off? Even if you don't want to do the probabilistic piece, can you shorten the cacheTTL so that it's under what you give KV? Otherwise, BetterKV is not really different than cache+R2.
WI can't wait for this
HQq, what’s your username on Discord, so I can credit you for the changes?
Bvlovich
BOh that's my github username
Bbeelzabub#0369 on Discord
HWait
HNo, I meant GH
HI guess I’m just brain-tired from the heat…
H
BBut yeah, being more likely to refreshing the value as you approach the expriy end date is a significant cost saving measure. Counter-intuitive but true. It's how KV has to operate under the hood for similar reasons. We technically use a bounded exponentially increasing algorithm where after 5s there's an infinitesimaly small probability of a refresh that doubles with every passing second up to 100% at something like 45s or 50s at which point every read has a 100% probability of causing a background refresh. That way only a small subset of requests end up triggering a refresh while the rest just always serve from the cache without any stampeding herd. We have other tricks we're layering in as well, but they're not available externally yet.
ZHow old is this writeup? I did not even know that putting cache in front of KV was a thing at some point, and from the time I started using (~2 years now), I always assumed KV is parallel to Cache. In other words, since KV is already at the edge, what's the point of cache in front of a cache?
UTo reduce billing since KV cache hits are still billed but the cache api is free
DNow that you have exposed the cache status of reads, this becomes a lot easier to implement - previously when I thought about a probabilistic update, using the time the read took as an indicator for hit/miss was rather messy, so thanks for implementing 
D(one small issue I noticed with the docs PR, the ToC seems to cut off at some point)
BThe latter
エHi.
Is there any problem with publishing Cloudflare kv id, preview_id on github?
I have defined id, preview_id in wrangler.toml like this, is it ok to upload it as is where it can be seen by unspecified people? Or should I put them in .dev.vars?
Is there any problem with publishing Cloudflare kv id, preview_id on github?
I have defined id, preview_id in wrangler.toml like this, is it ok to upload it as is where it can be seen by unspecified people? Or should I put them in .dev.vars?
ZEverything in
wrangler.toml@zegevlier Thank you.
Is it OK to write directly in wrangler.toml and make it public for things like api key provided by cloudflare, not just kv?
I'm curious because GCP and AWS keep things like api_key secret.
Is it OK to write directly in wrangler.toml and make it public for things like api key provided by cloudflare, not just kv?
I'm curious because GCP and AWS keep things like api_key secret.
ZNo. API keys should never be made public. You should not be storing these in your
wrangler.toml
エThank you very much.
I wasn't sure how to tell which items should be secret, but I think your advice helped me understand a little better.
I checked the cloudflare dashboard and the api tokens clearly says "Protect this key like a password!" to keep it secret.
I'll try to keep this kind of warning secret, but if there is anything else I should be aware of, could you please let me know?
I wasn't sure how to tell which items should be secret, but I think your advice helped me understand a little better.
I checked the cloudflare dashboard and the api tokens clearly says "Protect this key like a password!" to keep it secret.
I'll try to keep this kind of warning secret, but if there is anything else I should be aware of, could you please let me know?
ZIn general (this might not always be true, but it's usually a good rule of thumb. As far as I know it always holds for Cloudflare stuff), IDs are safe to share, keys and secrets are not.
エThank you again and again for your kindness. I understand.
