Yeah don’t take this thing apart if you don’t have to. I wasted a lot of time trying to put it back
Yeah don’t take this thing apart if you don’t have to. I wasted a lot of time trying to put it back together
Syou guys gota do more puzzles or legos lol
Jthe first thing i noticed in that pic is the smiley face on the bucket
JThank you for being the guinea pig
JAs far as I'm concerned, @walmis put black magic in there and that's all I care.
LDaymn you, now I'm too scared to open mine to install a second pot for damping
BNot sure if this is the right place to ask, but my order is held up in customs here in the USA. It's flagged at FedEX as needing a form. How do I get this?
WIt might need this form: https://www.fedex.com/content/dam/fedex/eu-europe/resources/GB_EN_2021_12_master_pdf_NA_Electric_Motor_and_Generator_Worksheet_marketing.pdf
I'll submit it tomorrow. You can also try to call FedEx to figure out what exactly do they want (if not the above).
I'll submit it tomorrow. You can also try to call FedEx to figure out what exactly do they want (if not the above).
BWill do. I tried calling them already but kept getting shuffled around and ran out of time. I’ll try again this evening. EDIT: Just got off the phone with FexEX. They don’t know what form it is they need, but they’re going to get back to me on it. It would be funny if it weren’t so tragic. I’ll let you know as soon as I know.
NThanks! What pot did you buy?
Jhttps://discord.com/channels/965234441511383080/1123324329820688456/1123324329820688456 could try this as well
KSorry, I’m not sure what you are asking beyond what I already said: Shaft long enough to tighten down and 10k ohm. That’s 100% the description.
N#
support how do you buy a flight stick from you guys? I seen one on tiktok and they look sweet
support how do you buy a flight stick from you guys? I seen one on tiktok and they look sweet
JI assure you, they are sweet but quite a (well worth) wait.
N@jehlybean yes but it’s confusing to buy
JStep 1: Fill out the form. Step 2: Wait. 
NThx
BThanks. As described in that post, FedEX is useless. It’s like the “something went wrong” pop up on Macs, except with them you can reboot and go on about your life. EDIT: sorry, not trying to bust your chops; frustrated with FedEX. I appreciate the help!
RIs this correct pot I would need to add? Where is the connection to the rhino? How much disassembly is required?
R10K OHM Linear Taper Rotary Potentiometer B10K Pot with Knob and 3-Pin JST-XH2.54 Connector Lead(Pack of 2) https://a.co/d/6aXXWya
Linear Track Variable Resistor Potentiometer with tuning Knob and 20cm Flying lead with XH2.54-3P connector Track Resistance:10K Track Taper: Linear No. of Turns: 1 Shaft Diameter: 6mm Wire: 20CM Terminal model: XH2.54-3P Shaft Length - Metric: 15mm Resistance Tolerance: ± 20% Power Rating: 500mW...
LThe thread is hidden by the cap in both pictures but it looks short to my eye. They've blurred the bottom but it looks like the one I have (BI P160KN9G) and that is too short for Rhino. The panel is 9 mm thick so you need ~ 12 mm of thread to get through and be able to tighten it down. I'm going to add a second pot myself, I'll let you know if I find a good one that is easy to install.
RPlease do. Thank you
L
oh no my local store doesn't have anything for panels thicker than 6 mm. Next I'd open up the Rhino and see what kind of pot Walmis used. I bet he didn't install it the easy way. Going that way any common cheap 10k pot would suffice.LDudeman's video shows it. The pot is sunk in. It's not 9 mm but maybe 5 mm and this way you can use most cheap pots. I've sunk stuff like this, it's not hard but you do need a suitable drill bit.
LOr am I seeing things? What do you think?
WThe pot mounting is pocketed, since the material is too thick for standard pots. It's 8mm.
W
LJST XH connector with 2.54 spacing right?
WYep
BFedEx: "Your shipper needs to send a specialized statement for it to clear customs" Me: "I understand that, and the shipper is waiting to hear what that statement is. If you tell me what it is, I can tell him what it is. We're both motivated to get me this package." FedEX: "They need to submit a specialized statement." Me: "What does the statement need to say?" FedEX: "It needs to be a specialized statement." Me: "You keep saying that like it's informative... do you hear that it tells me absolutely nothing about what the statement... I'm sorry, SPECIALIZED statement... needs to say?" FedEX: "your shipper needs to submit a speciali----" Me: "Ohhhhhhh.... a SPECIALIZED statement... why didn't you say so in the first place?" FedEX: "Yes, sir. They need to send that. Please hold after the call for a brief Customer Service Survey." This was, of course, after spending 10 minutes navigating their automated phone support tree. For the life of me, I don't understand how they stay in business. So, @walmis , you may be getting a call or email from FedEX with their requirements for the contents of this alleged "specialized statement". I appreciate your help in this. _Erik
JThat is awful.
Jfor anyone else looking to ship soon, walmis does offer DHL which also uses their own location for customs (at least in USA idk about other countries)
VWalmis probably got put on the naughty list ever since he got flagged for importing rhino parts!
WFedex shipments usually go pretty smoothly, but occasionally there are some hiccups with customs. I'll see what I can do from my end tomorrow.
WDHL is like double the price of fedex though
K*off topic but we are lucky to have somewhat reasonable prices from Lithuania out... (at least to the U.S.A.). I tried to ship a laptop via Fedex to Vilnius last week. They wanted $540 WITHOUT insurance. That was the slowest option too.
KIt was literally cheaper to buy an airplane ticket.
Joof it has changed to double? rip
WYour package should be released today:)
PI have changed the grip type to winwing and plugged in my adapter but it doesn't seem to pick up the grip that is plugged in, I tried applying, store, unplug USB, plug back in, power up etc, but not seeing a result ?
Panything else I should be doing to swap over ?
PI have previously used my Virpil and Thrustmaster grips without issue ?
PFor reference I am trying to use the F16-EX grip, if that makes a difference
WCan you change the grip type to Generic (Debug) and grab a screenshot of the Debug tab messages window while it's plugged in?
Pdo I need to change to that, then power off, close program, restart etc before taking that pic mate ?
P
Wnope, no need, just change the grip type
Pthis is how it is in the mean time
Wlooks like the rhino can read the adapter