FIGURED IT OUT: have to check the 'sticky' checkboxes. Now trim works as advertised
FIGURED IT OUT: have to check the 'sticky' checkboxes. Now trim works as advertised
Syes, never calibrate in windows, it mucks up everything
NAre we talking DCS? Which module? should work without sticky set
Syes. DCS and Apache
Shuey doesnt need sticky
Adoesn't sticky override the in-game forces?
Nyes
Nare you certain you don't have axis curves set?
Awell if it works for apache, then it works
Ado note that it will override everything everywhere all at once, so try to disable sticky for other stuffs if you run into issues
SI really need an axis curve of 10 otherwise getting into a stable hover is too twitchy
Nthats why its jerking back on you then.. physical stick and virtual stick get out of sync with curves enabled and it messes up FfB
Awell then you'll probably need the override, but then again override should do the trick
Adoes this also happen when you set the curve in the vpforce configurator?
Sdidnt know you could set curves in the VP config
Nwas going to say the same thing
AI don't know either I've never done it, but I just assumed you could
SI know that axis scaling results in the kind of change you get by changing saturation in the dcs axis tuning
Sthere is no curve editor in vpconfig
Ayeah seems so
AI wonder if a curve editor in vpconfig could be made to be compatible with force trim and other effects
Athat might be useful
AI don't use curves on my stick so I didn't even realize such an option didn't exist, but isn't that kind of commonplace in all sorts of stick configurators?
Amaybe in some upcoming version, I don't know
Sthe virpil software does not have a curve editor
Ayou could post a suggestion or a wishlist thing about the subject
Athen again virpil doesn't run into trouble with forces if you set curves in-game
SI normally use a curve of 10. I just tried setting curve to 0 and the weird recentering goes away. Enabling sticky on the spring allows me to use curves and get proper trim behavior
Nhonestly you don't lose much.. there isn't much in the way of stick forces for the Heli's in DCS outside of Trim FFB anyways
Njust have to remember to undo it if you are jumping in a fixed wing.. you might be able to use the
vpconf=<profile>.vpconf in the aircraft profile settings in TelemFFB.. I've seen the code, but I've never tested it (to load a vpconf profile when you load an aircraft)
TRhino + extension + decent grip + profile = good AH-64D in DCS. Will go post my profile now.
TI thought there was a profile channel, but cannot find it. Put this together with the help of a current US Army AH-64E pilot.
TIt is a VPC T-50CM2 grip with a 200mm extension - reduced the throw per his instructions with the end stops, and then maxed out the spring, again per his instructions, and all works fine and the force trim is transformational.
CHello, my Rhino order is now being built 
Has anyone mounted their Rhino on a Long Monster.tech desk mount? Does it work well? Did you use an S-Curve extension? If so what size? Virpil only seem to stock the 200mm S curve
Has anyone mounted their Rhino on a Long Monster.tech desk mount? Does it work well? Did you use an S-Curve extension? If so what size? Virpil only seem to stock the 200mm S curve
V:package: 
RHINO #0169 Has Shipped!
RHINO #0169 Has Shipped!V:package: 
RHINO #0170 Has Shipped!
RHINO #0170 Has Shipped!
R@craptakularuk I did exactly that to start with, long monster desk mount, and it works.... sooort of. The long mount can certainly handle the Rhino, but I wouldn't call the margins comfortable exactly. There's a fair bit of flex going on, and I worry about the long term stress on the desk edge, unless your desk is solid and strong hard wood. I'm putting together a better (I think... hope) solution of my own, but it remains to be seen if it will be effective, and there are others here who have designed and 3D printed their own mounts to solve this problem. Worth a search! No S-curve extension for me, using Winwing Orion 2 and its 100-200mm adjustable straight extension and monstertech chair w/center cutout.
JOh man, that would be hot sh.. if telemetry would load the correct profile for the plane it sees. I got a bunch of different profiles and it would be great if it would load the right one on the fly. Have to look into that!!!
F@jehlybean Thanks for giving a hint about the z extension. Got mine today and this is perfect now. Works great with the warthog grip by rotating the extension connector.
LWalmis did give curves a try not so long ago. There is one fundamental problem to solve first: 📃general
LThis is also why DCS curves are broken when you use them with FFB.
LI wonder if axis zoom could help you to get into a stable hover in 64 @skypickle? I don't have the module myself.
RHi all, does anyone know if there are any additional duties when purchasing from Canada?
JGlad ya like it 
FIt's also ridiculous how easy it is to compensate the offset weight with the software. You don't even know about the offset while using. I'm already a huge fanboy to the Rhino. This is an amazing product.
R@reign7168 Yes, you'll be charged pst and gst on it before or during delivery, so 14%, paid through fedex.
Jhi guys, how do i purchase the product? thanks
B#
faq
faq
MYall, I bought the Brunner CLS-E Joystick and seems your product is way more Beefier than the Brunners. My Brunner shitdown the Force after full delction near the top end of the force after 2 or 3 circle fight. No good use for DCS. you produect seems way better for DCS applications.
MI put in applicationf or reservation