I thought there was a profile channel, but cannot find it. Put this together with the help of a cur
I thought there was a profile channel, but cannot find it. Put this together with the help of a current US Army AH-64E pilot.
TIt is a VPC T-50CM2 grip with a 200mm extension - reduced the throw per his instructions with the end stops, and then maxed out the spring, again per his instructions, and all works fine and the force trim is transformational.
CHello, my Rhino order is now being built 
Has anyone mounted their Rhino on a Long Monster.tech desk mount? Does it work well? Did you use an S-Curve extension? If so what size? Virpil only seem to stock the 200mm S curve
Has anyone mounted their Rhino on a Long Monster.tech desk mount? Does it work well? Did you use an S-Curve extension? If so what size? Virpil only seem to stock the 200mm S curve
V:package: 
RHINO #0169 Has Shipped!
RHINO #0169 Has Shipped!V:package: 
RHINO #0170 Has Shipped!
RHINO #0170 Has Shipped!
R@craptakularuk I did exactly that to start with, long monster desk mount, and it works.... sooort of. The long mount can certainly handle the Rhino, but I wouldn't call the margins comfortable exactly. There's a fair bit of flex going on, and I worry about the long term stress on the desk edge, unless your desk is solid and strong hard wood. I'm putting together a better (I think... hope) solution of my own, but it remains to be seen if it will be effective, and there are others here who have designed and 3D printed their own mounts to solve this problem. Worth a search! No S-curve extension for me, using Winwing Orion 2 and its 100-200mm adjustable straight extension and monstertech chair w/center cutout.
JOh man, that would be hot sh.. if telemetry would load the correct profile for the plane it sees. I got a bunch of different profiles and it would be great if it would load the right one on the fly. Have to look into that!!!
F@jehlybean Thanks for giving a hint about the z extension. Got mine today and this is perfect now. Works great with the warthog grip by rotating the extension connector.
LWalmis did give curves a try not so long ago. There is one fundamental problem to solve first: 📃general
LThis is also why DCS curves are broken when you use them with FFB.
LI wonder if axis zoom could help you to get into a stable hover in 64 @skypickle? I don't have the module myself.
RHi all, does anyone know if there are any additional duties when purchasing from Canada?
JGlad ya like it 
FIt's also ridiculous how easy it is to compensate the offset weight with the software. You don't even know about the offset while using. I'm already a huge fanboy to the Rhino. This is an amazing product.
R@reign7168 Yes, you'll be charged pst and gst on it before or during delivery, so 14%, paid through fedex.
Jhi guys, how do i purchase the product? thanks
B#
faq
faq
MYall, I bought the Brunner CLS-E Joystick and seems your product is way more Beefier than the Brunners. My Brunner shitdown the Force after full delction near the top end of the force after 2 or 3 circle fight. No good use for DCS. you produect seems way better for DCS applications.
MI put in applicationf or reservation
RThank you!
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
SI Hope @walmis can Rampe Up production. Currently IT will aproximately Take a year for Mine to get produced
i'll gladly wait. Bur cant wait...
i'll gladly wait. Bur cant wait...
SI imported your conf file but there seems to be some incompatibilities. I am running the latest firmware for the Rhino and use a virpil constellation alpha. There is no twist axis or brake axis. Also the minijoystick does not register and neither does the scroll wheel. It looks like you are running an older firmware?
TQuite possibly as that was first profile. Will download new on and redo.
SHere are the settings I gleaned from your profile for anyone else who wants to try it but is not running your firmware
S
S
THis main comments were a ~30cm end to end throw in both pitch and roll and then on stiffness when force trim was on he said:
As for stiffness well that’s hard to describe, you should be able to push it about 5-7 cm from the trimmed position, 10 if you really force it, but you wouldn’t, you know?TWhich got me to about 2/3 for the end stops and all the spring power I could get.
TYou were correct was on the 0.14 firmware.
HRecntly updated the firmware and the configurator. Loaded last versions profiles. Now getting oscillating of the stick that increases more so then previous version it would stay under a certain low limit and be basically elliminated. Does anyone know hwo to reduce that in this vcersion if possible. I know earlier on it was doing it and then got fixed last version or 2.
WCan you show your settings? Both effects and settings tabs with expanded
advanced
JI was also wondering about this new effect. It seems like its a G effect or an AoA effect. When I stick back into a turn at high G and AoA the stick pushes forward. So I'm fighting it and I'm getting an oscillation effect. Its really cool. But, would like to tone it down a bit. even with periodic effect at 12%, its really heavy.
Jto give context I updated to the most recent TelemFFB
JYou can eddid the effects in the Telem ini file. I would recommend to see into the user (?) ini, because this settings carry over from version to version while the ini gets reset (can't remember the correct file names, away from the computer). Just check in the TelemFFB channel down low. (knowledge base)
FI also got very intense and gradually worsening oscillations with the newest configurator & TelemFFB. So intense that had no other choice than to push the red button. My hypothesis is that some of the oscillations resonate if there is many or certain periodic effects overlapping. I did not have this issue when periodic effects were turned off. Also no problem with the "release version" of TelemFFB.
FI was worried that if I hold the stick, it will break the mounting points.
WDid you run it with telemFFB with G/or AoA effects ?
FAoA, RPM, gun shake. I believe all of them might have triggered at the same time. Was really pushing AH-64 to test the new version. No G-effect.
WCan you also show your settings? Periodics shouldn't cause such oscillations
FIt did it with the default settings with latest wip-version of TelemFFB, master gain 100% and periodic gain 25%. No problem after turning some of the periodic effects down or off.
FNo problem in this sense that it can be easily fixed by tuning down some settings. But some kind of periodic effect filtering or damping option could help if the oscillations start to shake too violently.
WCan you still screenshot the your vpconf settings effects/settings with advanced expanded ?
FOn mobile at the moment but can share later today once in front of the computer.
FHere are my settings. Static force to counter offset extension. Friciton is not on despite the slider being at max setting.
FThe oscillation (when it happens) starts with small but sharp vibration that gradually becomes more intensive, until it gets out of control. It is only coming with the latest TelemFFB. Not without it and not with an older version.
WI've tweaked the Apache in the latest telemFFB, probably the ETL shake was causing this
WAlso set the Periodic Effect LPF to something like 20-30Hz
FWhat does it do?
WAttenuates the high frequencies
WCan you expand the Advanced sections too ?