Jgreat, thank you
WAnd likely 80% of others on this board.
HHave we met? 
V:package: 
RHINO #0194 Has Shipped!
RHINO #0194 Has Shipped!
DWho has mounted a Rhino to a DOFReality H6/P6?
V:package: 
RHINO #0195 Has Shipped!
RHINO #0195 Has Shipped!
BI was JUST telling a friend this a couple days ago. With VR, FFB, MSFS, and DCS (sorry X-Plane) and the wide range of flight controls available, we are fortunate indeed to have the toyz that we have.
V:package: 
RHINO #0196 Has Shipped!
RHINO #0196 Has Shipped!
BQuite a long way from the ol serial port joysticks.
And having to choose between not loading joystick drivers, sound drivers or the mouse driver..
Wasnt really that hard, if I had use of my joystick I didnt need the mouse so much.
And having to choose between not loading joystick drivers, sound drivers or the mouse driver..
Wasnt really that hard, if I had use of my joystick I didnt need the mouse so much.
οΏ½I'm also looking forward to having the ability to use the Realsimulator F-16 grip! Do you have the info needed to enable that one in addition to the F-18 grip?
MThey use very similar firmware, and if the fix is what I think it is, it should also apply to the F-16
HWhat does it mean when my assigned S/N changes? This is because some people changed their mind and cancelled orders?
FI think so. Mine has changed a few times.
BMy serial has moved up by about 75 so far.
WYup, that was my intention as well. However I struggled to get the force I was wanting due to the longer extension. And then, as mentioned, it wasn't great as a heli cyclic. I'm rebuilding the base now, but I'll hopefully have something that is kinda half under the floor. Something of a compromise. Hopefully it doesn't end up looking like a dogs breakfast.
WIf I was building a cockpit dedicated to one aircraft it would be soooo much easier!
WIronically I have found myself flying the F16 in DCS, which of course doesn't even have a central stick 
SMy servos are installed in the Yoke setup at the moment, but remember the stick being more then adequate torque wise, even with the long throw.. I still have my Warthog stick setup installed for modern jets, as they are FBW. When I have the cash will purchase more servos and refit out the stick housing for warbirds, old jets and helis.
DSo I've printed pretty much everything I need except for the large pulleys. What print setting would you recommend for PLA? I was thinking about 4 perimeters and 40% infill so the inertial mass won't be too high. I was also thinking about locally increasing the center part's infill to 100% in order to reduce creep caused by the clamping force of the bolts.
JI personally went 4/40% on my pedals. Works great. Super strong
ACould anyone comment If any of these statements are relevant to Rhino?
"Winwing" we have already achieved torque closed-loop force feedback capabilities within our certified flight training devicesβa technological marvel surpassing any prevailing 'open-loop' counterparts saturating today's market...https://forum.dcs.world/topic/333680-interview-with-winwing-founder-alex-li/
Currently available consumer-grade force feedback products and some ongoing demos suffer from issues such as excessive inertia, dead zones in the gearbox mechanism, and cogging effects (resulting in less smooth operation due to inherent magnetic pole switching of motors). While these products may offer features like responsiveness, vibration control, and dynamic forces, they simply cannot achieve precise manipulation. Moreover, they risk inducing erroneous muscle memory for pilots and lack practical applicability.
ED Forums
Dear friends of the DCS and sim community. In my Blog (El vuelo de la Gran Avutarda) I had the pleasure to interview Alex Li, who is the product manager and founder of WINWING. Chengdu WinWing Tech Co., LTD established in March 2013, specialized in research,development, production and sale of Fli...
TIβm guessing that by βopen loopβ he means regular mechanical spring force centering joysticks, as I donβt see any FFB solutions βsaturating the marketβ. As for the rest, I expect he is blowing his own horn. But itβs great to see controller developers going forth with FFB solutions for personal use 
NSpecifically related to the description of other FFB devicesβ¦
excessive inertia, dead zones in the gearbox mechanism, and cogging effects (resulting in less smooth operation due to inherent magnetic pole switching of motors).
The Rhino suffers from exactly zero of these.
excessive inertia, dead zones in the gearbox mechanism, and cogging effects (resulting in less smooth operation due to inherent magnetic pole switching of motors).
The Rhino suffers from exactly zero of these.
BI may be uninformed but so far the only 'publicly' prevailing ffb sticks ive known of are surviving sidewinders and BrΓΌnner.
Sfunny! if you want to increase immersion with some other FFB effects, heres some ideas: https://twitter.com/picturesfoider/status/1702323236556701902
non aesthetic things (@PicturesFoIder)
Twitter
β’
this is insane
Likes
109834
Retweets
10150
9/14/23, 2:07 PM
AI tend to like WW products and it's totally understandable that a company would want to toot their own horn, but they are pretty good at tooting their own horn
Awould be interesting to see what they come up with
BOh, yeah bought the combat and take off panels a while back and an orion2 and f16 throttle grip earlier this summer.
And the mfd frames are tempting me a little..
And the mfd frames are tempting me a little..
AI wonder if those combat panels are still going to be available
BNo idea, ww so far has a history of just not restocking all while claiming it will be back soon, until they just let slip they stopped making it six months ago.
BIf I was to consider a new gimbal it would be a firce sensing one.
For 'regular' I'll judt wait for my rhino number to ping.
For 'regular' I'll judt wait for my rhino number to ping.
DAnyone know how to re-load the firmware?
PNo the old ones are no longer for sale the new take off panel is out soon or maybe now, a new combat panel is coming, but they messed up & didn't separate the panels into left & right, like last time the wing fold is on the same panel as the parking brake etc. so not able to have things on the correct side, imho this was a mistake & a massive oversight I'm sure they would of seen the feedback about making the panels have the correct things together for a left & right set up, the new takeoff panel does look really good though.
οΏ½I recently removed my WinWing F-16 grip to try some other extensions. mounting location, etc. Putting it back on, the Rhino no longer recognizes the button pushes even connected directly with the WW adapter. It still recognizes the button pushes from my Vipril Alpha grip so I don't think the problem resides in the Rhino. Does anyone have a suggestion on how to test the WW Grip and Adapter without owning a WW Base? I also just updated to v1.0.15 but since the Virpil works, I don't think that is the problem. TIA
WCan you set the grip type to
Debug and check the output. If it's all FFs then it doesn't detect the adapter, otherwise the adapter does not detect the grip.
οΏ½@walmis Looks like the adapter is good but grip is not working?
[11:52:50.095] * USB Connected
[11:52:50.250] Motor 0 active
[11:52:50.250] Motor 1 active
[11:52:50.250] Motor 0 active
[11:53:08.366] Config received
[11:53:08.371] Config written to flash
[11:53:20.235] Config received
[11:53:20.235] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:20.434] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:20.635] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:20.836] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:21.037] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:21.238] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:21.440] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:21.640] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:21.841] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:52:50.095] * USB Connected
[11:52:50.250] Motor 0 active
[11:52:50.250] Motor 1 active
[11:52:50.250] Motor 0 active
[11:53:08.366] Config received
[11:53:08.371] Config written to flash
[11:53:20.235] Config received
[11:53:20.235] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:20.434] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:20.635] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:20.836] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:21.037] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:21.238] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:21.440] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:21.640] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
[11:53:21.841] FF FF FF FF FF FF FF 00 00 08 00 08 00 08 00 08
DAgreed, I think they were just going for βadd all the thingsβ on a single panel, not trying to do replica.. I think only the taurus panel is close (but even then its not exact)
Jhttps://techraptor.net/gaming/features/microsoft-flight-simulator-2024-interview according to this interview, the 10 years of support for msfs was simply that they would work on developing and supporting msfs for at least 10 years. not the same game for all 10 years. that was the stipulation by which they were allowed to make msfs 2020 apparently
TechRaptor
In this Microsoft Flight Simulator interview, Jorg Neumann discusses Microsoft Flight Simulator 2024, which is "by far the biggest and most ambitious" simulator ever made.
DYes
BNow that I've got about 3.5 months of data... decided to so some regression analysis...
V:package: 
RHINO #0197 Has Shipped!
RHINO #0197 Has Shipped!V:package: RHINO #0198 Has Shipped!
RHINO #0198 Has Shipped!
MI just have paid for my rhino! 8 left till mine ships. I will be working with xplane and prepar3d, especially with the T-38C and T-6A for training purposes. I am excited and if anyone is interested let me know!
FHow do you implement force feedback on p3d?
FAnd xplane?
BI don't think either P3D or XP are supported yet.
MThatβs the point. I have to figure it out
MI do think xplane works and p3d uses sim connect so I can work somethin out
VDoes anyone have recommended settings for flying Apache? It's awfully squirrelly for me especially at low speeds when landing or hovering.
οΏ½YouTubeRedKite
Trim is confusing in simulators, we'll explain how it works in the real aircraft and DCS, modes and mistakes to avoid.
Support the creation of more content!: https://www.patreon.com/RedKite
Join the Official Discord!: https://discord.gg/sfd8sVr
https://www.facebook.com/RedKiteRender/
https://twitter.com/RedKiteRender
The Liveries used in this...
Support the creation of more content!: https://www.patreon.com/RedKite
Join the Official Discord!: https://discord.gg/sfd8sVr
https://www.facebook.com/RedKiteRender/
https://twitter.com/RedKiteRender
The Liveries used in this...