WOr you can check the numbers from another saved profile before the limiter
Pyep just thought of that, just loaded an old one 
POk that did it, just put limiter on then adjust axis scaling
MHi, anyone here using a real simulator grip with the Rhino? I have some questions....
MI am using the grip as a standalone grip. I dont really need all the bells and whistles full functionality via the RS software and want to use it on the Rhino FFB base. I simply need the grip to function as a normal HID device via the rhino base.Β
On first try it seemed there was some issues with button numbers being double assigned and some not being picked up.Β
Whats the suggested best way to proceed setting it up given the useage scenario described above? I want to try and avoid all the Real Simulator bluetooth issues.....
On first try it seemed there was some issues with button numbers being double assigned and some not being picked up.Β
Whats the suggested best way to proceed setting it up given the useage scenario described above? I want to try and avoid all the Real Simulator bluetooth issues.....
MI have selected teh Real simulator 64 button option in the configurator
MIts the F18 grip incidentally, not the F16
οΏ½
MWalmis is troubleshooting this. Still not working right in the most recent firmware. I use Bluetooth for the grip in the meantime
P@walmis Hey m8, I've just shortened the ww extension cable & the connection to the female end of the adapter is still just too finicky, the slightest touch will stop the connection. I'm not sure what else I can do apart from hot glue but I doubt even that will fix the issue. Any help you can give me would be great
WProbably the extension's male pins are slightly too short.
If you're not afraid of a bit of soldering you could push the adapter female pins in the adapter. I have a video on how to do it:
https://photos.app.goo.gl/um8ZC7NgLJRGkY5U7
Other way would be to modify/replace the male connector.
If you're not afraid of a bit of soldering you could push the adapter female pins in the adapter. I have a video on how to do it:
https://photos.app.goo.gl/um8ZC7NgLJRGkY5U7
Other way would be to modify/replace the male connector.
Pdo you mean the WW extension or the VPforce adapter?
PI've already shortened the ww extension cable & put it back together twice I'm really not keen to pull that thing apart again
Psorry just read that a bit better
Pguessing I just pull all the screws out of the adapter & pull it apart??
PDo I do this on both sides ie. all six pins for female side?
WOnly the three labeled ones
Poh, well I did all of them does that matter?
Wnope, you'll be fine, those other pins are not connected to anything 
Pstill no good!!!
Pdebug shows all FF's now, is that bad?
WMake sure you didn't short circuit 3.3V and GND pins on the female end (most likely)
Pso the adapter is toast now?
Wno, it'll work fine after you unshort those pins
POMFG !!!!! Got it! done, finally!
Pthanks heaps m8
MSorry to necro this discussion but is there any schematics or anything to help me get to the m/b? I can do soldering and all that, I just don't want to mess things up mechanically...
WYou'd need to undo the torx screws holding the rear plate (the one with the fan)
Moh, OK. rear plate doesn't sound too bad. Any advice on pot values?
W1-10k will work fine
M
SGood day all, trying to set XPforce up, for MSFS2020. I have TelemFFB, MSFS set to TRUE. XPforce licensed. I have trouble : If I go in the XPforce app once MSFS launched, at the Feedback menu, the case "Joystick Active" is sometime ON, sometimes OFF. It alterns fastly between checked and unchecked.
What's the problem? Somebody can help me to set it up correctly? Thank you much in advance.
What's the problem? Somebody can help me to set it up correctly? Thank you much in advance.
Syou dont need both XPforce and TelemFFB. pick one.
STelemFFB is made specifically for vpforce and is rapidly developing.
N@walmis - Kit arrived safe and sound! Thanks so much!
MOK.....as its lost in the depths of previous posts above....can someone give a pointers as to how best to dial out oscillations if you move the stick when its not being gripped? I have gone back to my heavier TM F18 grip and needed to turn up the spring rate on the dial on the outside, to stop the stick sagging back under its own weight ( was using a lightweight F14 stick) But now it will bounce back and forth if you knock it.
MI am using the TM grip on the virpil z extension with no riser, what do people with the same combination have as settings please?
WCan you show your current settings, I could give some suggestions
Mwill do shortly....thanks
M
M
WOkay, try spring strength proportional damper at 100%, damper LPF - 6Hz, Spring LPF - 2-4Hz
MOK, have set those, but noticed in config, not getting anythin g reported in the raw data and blue circle?
Mok, re set made those wotk, ignore
Mwow, sorted! and stick feels much better generally as well. Thanks Walmis!
RWalmis, you easily read post and ask guys to try certain settings based on complexity and complaints of what the stick is doing. Can you post the base settings here and or pin it. Then give a short discussion on your thought process and what each setting does and why you are adjusting etc. I know it would be a long post and want be respectful of your time. As you already have your hands full. Maybe something every couple weeks as you have time. I feel it would help a lot of us u Dees hand the system better and what the settings actually do. Anyway just a thought. Thanks again for the great product and customer service.
SOk thanks
EShort question: can i set a different strenght to the stick when trim released is pressed? And if so, how?
NForce trim release is just βabsence of spring forceβ. So any other effect like friction/dampen/inertia will remain active.
However, there is no way to change those settings dynamically whilst force trim release is held
However, there is no way to change those settings dynamically whilst force trim release is held
EThanks for the quick reply!
I am just starting to play around with all the settings. This thing is truly amazing!
I am just starting to play around with all the settings. This thing is truly amazing!