NI'm sure @walmis would be interested in some debugs when the loss of force is occurring with DCS though...
N
ABased! Although not sure if the button should be that big xD
Ndangerous buttons should be big, in your face and enticing....
AI’m using a 19a 180w power supply and I just burnt up the psu. What should I set max motor amp to to allow overhead with telem FFB effects? Or does that matter? It was a 19.5a and I had the motors at 19a.
JI'm not sure if you are referring to your power supply settings or the software...
the power supply that came with my Rhino is
input 120/240 3.5a
output 19v 9.5a
configurator is set for
Max motor current 30a
Mas PSU current 7.0a
the power supply that came with my Rhino is
input 120/240 3.5a
output 19v 9.5a
configurator is set for
Max motor current 30a
Mas PSU current 7.0a
AMore so the software
DI tried this for IL2 and this works below to add VPForce Rhino + Sim Shaker Wings Buttkicker. Has anyone tried to get all 3 to work like this successfully?
[KEY = telemetrydevice]
addr = "127.0.0.1"
addr1 = "127.255.255.255:34385"
decimation = 1
enable = true
port = 29373
[END]
How would I add in another one for IL2 SRS to get it to work???
I tried the following and it just come up with errors
[KEY = telemetrydevice]
addr = "127.0.0.1"
addr1 = "127.255.255.255:34385"
addr2 = "127.0.0.1:4322"
decimation = 1
enable = true
port = 29373
[END]
[KEY = telemetrydevice]
addr = "127.0.0.1"
addr1 = "127.255.255.255:34385"
decimation = 1
enable = true
port = 29373
[END]
How would I add in another one for IL2 SRS to get it to work???
I tried the following and it just come up with errors
[KEY = telemetrydevice]
addr = "127.0.0.1"
addr1 = "127.255.255.255:34385"
addr2 = "127.0.0.1:4322"
decimation = 1
enable = true
port = 29373
[END]
WThat's strange, kinda looks like a dcs bug. This appeared only recently right? I wonder if you jump into a different AC it still doesn't get reinitialized?
AIt’s happened before, don’t believe it’s a recent thing. But it did happen to me today which is why I tried to debug a bit further. It’s unclear if spawning another type of plane will fix, but going back to main menu and re-spawning an F14 definitely did not fix
NThe TelemFFB automatic telemetry setup insertion code for IL2 knows how to deal with an existing configuration and will add itself as
It looks like they released actual documentation on the telemetry stream and setup at the beginning of October... that would have been useful information when writing the decoder module for TelemFFB!
What you have written above should work per the configuration part of the document. As long as TelemFFB is set up as either
When you say 'it just comes up with errors'. Are you talking about TelemFFB or IL-2? I tested the format you show above and TelemFFB did not throw any errors.
addr1 if a configuration already exists, but it does not account for multiple entries. It looks like they released actual documentation on the telemetry stream and setup at the beginning of October... that would have been useful information when writing the decoder module for TelemFFB!
What you have written above should work per the configuration part of the document. As long as TelemFFB is set up as either
addr or addr1 (which it is in your example), it should pass the validation in TelemFFBWhen you say 'it just comes up with errors'. Are you talking about TelemFFB or IL-2? I tested the format you show above and TelemFFB did not throw any errors.
N
DCorrect that's what I tried and that worked. Now to add IL2 SRS back in. How do I do that with all 3 VPForce Rhino + Buttkicker + SRS ?
I tried with the following :
[KEY = telemetrydevice]
addr = "127.0.0.1"
addr1 = "127.255.255.255:34385"
addr2 = "127.0.0.1:4322"
decimation = 1
enable = true
port = 29373
[END]
and it threw the error I had stated above
I tried with the following :
[KEY = telemetrydevice]
addr = "127.0.0.1"
addr1 = "127.255.255.255:34385"
addr2 = "127.0.0.1:4322"
decimation = 1
enable = true
port = 29373
[END]
and it threw the error I had stated above
DIL2 SRS comes up with errors and Buttkicker software Sim Shaker Wings Software came with errors. TelemFFB works with no errors and IL2 works
Nhmm.. those apps probably work like TelemFFB and only understand addr and addr1. TelemFFB doesn't barf if addr2 exists, only if itself is not either addr or addr1.
Can you configure the address/port in either SRS or SSW?
Can you configure the address/port in either SRS or SSW?
Nalso, do either of those apps support telemetry forwarding? some telemetry app does, but I dont remember if its one of those two
DSo i don't really understand how the stuff works, I had just usually put it in. There is a good support forum that Andre the dev is pretty responsive in. I can submit the question to him there. Is there anything else?
DThe only one that really went further was the SRS guy to add the addr1. Makes me curious as well how are you guys adding a second FFB rudder pedals in IL2?
NThis is why I use 127.255.255.255 as the destination address in the config I write to IL-2. Then any receiver can open a socket on any address in 127.0.0.0/8 on the right port and recieve the stream
Nif everyone is using their own ip/port pairings, then the sim has to replicate the stream that many times. If everyone used the broadcast address, it only has to send it out once
DIm not quite following exactly about why you are choosing 255 instead of the standard 0 in there.
Nif you dont understand networking, then it won't mean anything to you. Broadcast vs. unicast
DYea unfortunately I'd have to kearn about that
DEither way here it looks like there are only 2 opportunities to open communication.
DWhen we need 3
DBut i wonder if we can send the telemetry on the same channel maybe the same port
NTry this though.
Manually set telemFFB to use the addr2 slot in the IL-2 config, then set
If SRS/SSW still error out, I'm afraid you'll have to go to them for support to get it working
Manually set telemFFB to use the addr2 slot in the IL-2 config, then set
l2_cfg_validation to disable in your TelemFFB user config.If SRS/SSW still error out, I'm afraid you'll have to go to them for support to get it working
Nno, because only one app can bind a given ip/port pairing at a time
DAh i see what you mean
DWhats interesting is that I actually have an additional app pysim thats using shaker for bhaptics vest and its just purely looking at some same port and shaking i didnt have to do anything more
DBc its using the same signal from port 29373 as the butt kicker
https://github.com/cercata/pysim2bhap
https://github.com/cercata/pysim2bhap
GitHub
bHaptics support for simulators. Contribute to cercata/pysim2bhap development by creating an account on GitHub.
DIn this case ... Thats 2 different applications/programs
DSo i wonder if i just change the port for the buttkicker to use your 35*** port would it work ... But unfortunately you guys are using that 255 address instead of the standard following 0 address. So i dont think that would work bc its a different ip address.
DI will definitely try addr2 for telemFFB though!
Nif they opened a port on 127.0.0.1:34385, they would also get the stream that is being sent to TelemFFB.. But I don't know if you can change the port in SSW .
NI'm a network guy.. not a network enabled app developer guy 
It may be possible to use the same ip/port across different apps. I just know that for TelemFFB, I can not bind the same ip/port between multiple instances (hence why I am using the broadcast address).
It may be possible to use the same ip/port across different apps. I just know that for TelemFFB, I can not bind the same ip/port between multiple instances (hence why I am using the broadcast address).WNot sure here, but IL2 might not set SO_BROADCAST flag, even if the address is broadcast, so that might cause issues.
NIt must, since multiple instances of TelemFFB work at the same time.
DSo does that mean you are able to get two instances of TelemFFB to work on IL2 (one for stick base, another one for say FFB rudder pedals )?
DWicked man, makes me more compelled to do the rudder pedal mod now since i have the Thrustmaster TPRs
D
NIL-2 doesnt understand FFB pedals and TelemFFB doesn't add any dynamic forces yet (so its just all the haptic effects). But I plan on extending it to at least implement dynamic spring force based on speed. There is not enough telemetry available from IL-2 to do anything more advanced.
N
DTake a look at Andres latest post ... Looks like he can fwd it.
https://forum.il2sturmovik.com/topic/57925-simshaker-wings-support-thread-for-il-2-users/page/23/#comment-1292475
https://forum.il2sturmovik.com/topic/57925-simshaker-wings-support-thread-for-il-2-users/page/23/#comment-1292475
NIf thats the case then you can send it to TelemFFB (127.255.255.255 port 34385). Then remove TelemFFBs config from the
Then disable the config validation in the TelemFFB config.
[telemetrydevice] part of the IL2 config (but leave it in the motiondevice section as it needs both sets of data).Then disable the config validation in the TelemFFB config.
DVery cool and then just leave addr1 for srs
DMight want to create something like this port forwarding for your telemffb program for the same purpose as they have, you just continue port forwarding for all the ffb apps you want and none will be stuck and run out of ip/ports due to IL2 addr limitation.
Smy pitch motor isn't recentering as well as my roll motor. anyone got any tips?
Nwhat's your setup like? Heavy grip? Long extension? Offset extension? Depending on these things, you may need to adjust the "balance springs" to compensate. You can also use "adaptive recentering" to help keep the stick centered.