Pretend like I'm a dumb dumb, is there a guide to actually setting this up?
Pretend like I'm a dumb dumb, is there a guide to actually setting this up?
Mty, is there a guide to setting up a stop on the axis for the profile?
Nnot that I know of.. it is just a matter of configuring the endstop feature in configurator, but I don't use it so I can't really give you any tips.
MThe profile load feature isn't working for me. I created a new profile, saved it to the configs folder, and pointed the telemffb config at it via what you posted, it doesn't update in the F-15
NI know the feature works, so...
- check the telemffb log for any clues
- post the relevant section if your telemffb user config
M2023-11-16 21:52:32.906 - WARNING - Unknown parameter vpconf
MThat's gotta be the issue
M[F-15ESE]
type=JetAircraft
vpconf='C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf'
runway_rumble_intensity=2.0
speedbrake_buffet_intensity = 0.15
gear_buffet_intensity = 0.15
type=JetAircraft
vpconf='C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf'
runway_rumble_intensity=2.0
speedbrake_buffet_intensity = 0.15
gear_buffet_intensity = 0.15
Nits probably barfing on the backslashes... try the relative path using forward slashes
'./configs/F-15E.vpconf'M2023-11-16 22:02:35.630 - WARNING - Unknown parameter vpconf
Same thing with different slashes
Same thing with different slashes
Nlooks like there's a bug that displays that (Because there is no internal default value in TelemFFB).. but it should still load the profile
NYour rhino will beep when it loads (unless you have the buzzer disabled in configurator?)
MNo beep, no profile swap
NSend the whole TelemFFB log. I’ve got a couple minutes before I have to log off.
MNdamnit... (my bad).. delete this from your config (both default and user if it exists in there).. this is conflicting with the ESE...
NI'll need to push an update to fix that permanently
Mtrying without that
Mstill didn't work
Nhmm.. not sure what to say... after deleting the erroneous part of the config per above, it works fine for me.
Nlook at your log again and make sure it is not still overwriting the read config from another section.. this is what your previous log said
The bad [F-15E] section was overwriting what you had in the [F-15ESE] section
The bad [F-15E] section was overwriting what you had in the [F-15ESE] section
MI'll check the most recent log
Nthat looks normal... its finding your configurator install and its picking up on the vpconf setting... cant say why its not working....
What happens if you do this from a windows command prompt?
What happens if you do this from a windows command prompt?
"C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\VPforce_FFB_Configurator.exe" -config "C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf"MThe first one opened VPForce Configurator
MThe 2nd one threw a windows "how do you want to open this"
Nyou need to run it all as one command
MThat does nothing, doesn't throw an error
MDoesn't even reopen configurator when I do them both together
Nits not supposed to.. thats how you programaticaly load the profiles. That is exactly what TelemFFB does.. so it looks like the problem is not with TelemFFB
Ntry this too, and make sure it returns the right path to your configurator install..
reg query "HKEY_CURRENT_USER\SOFTWARE\VPforce\RhinoFFB" /sMexportPath REG_SZ C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1/configs
Nbut that shouldn't matter here since its not working straight on the command prompt either
MThat's right'
Nand if you actually cd to
C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1 and then runVPforce_FFB_Configurator.exe -config .\configs\F-15E.vpconf?Nand what if you import F-15E.vpfconf manually inside Configurator?
MNothing for the cd, and manually importing works
MIs there a setting or something in configurator that needs to be checked to allow an external profile switch/import?
Nbest last idea I've got before I have to turn you over to @walmis for help is to try loading this config, which I know %100 works (you can re-load from the device in configurator as long as you dont press the store button first).
Mwhat am I doing with that file?
Nput it in your configs folder and try loading it the same way you have been trying your F-15E.vpconf?
NVPforce_FFB_Configurator.exe -config .\configs\tst.vpconfMIt didn't beep or anything
Ndid any of the settings change if you open configurator? the master gain would be at zero if it was sucessful
Nactually.. delete that file.. you don't want to load it...
Mnope. it's still on my default profile
Nok.. something else is up then and you'll have to work with walmis to figure it out... the configurator piece isn't something I have any visibility into for troubleshooting
MCopy, thanks for trying
W@.mashed.potato. you don't have the beeper disabled by any chance ?
MNo sir, when manually swapping profiles, the beep happens