I know the feature works, so... - check the telemffb log for any clues - post the relevant section i

NNumber481 I know the feature works, so... - check the telemffb log for any clues - post th...

M

MashedPotato•11/17/23, 4:52 AM

2023-11-16 21:52:32.906 - WARNING - Unknown parameter vpconf

M

MashedPotato•11/17/23, 4:53 AM

That's gotta be the issue

M

MashedPotato•11/17/23, 4:53 AM

[F-15ESE]
type=JetAircraft
vpconf='C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf'
runway_rumble_intensity=2.0
speedbrake_buffet_intensity = 0.15
gear_buffet_intensity = 0.15

MMashedPotato [F-15ESE] type=JetAircraft vpconf='C:\Users\Mike\Desktop\VPforce_FFB_Con...

N

Number481OP•11/17/23, 4:59 AM

its probably barfing on the backslashes... try the relative path using forward slashes

'./configs/F-15E.vpconf'

'./configs/F-15E.vpconf'

NNumber481 its probably barfing on the backslashes... try the relative path using forward s...

M

MashedPotato•11/17/23, 5:03 AM

2023-11-16 22:02:35.630 - WARNING - Unknown parameter vpconf
Same thing with different slashes

N

Number481OP•11/17/23, 5:06 AM

looks like there's a bug that displays that (Because there is no internal default value in TelemFFB).. but it should still load the profile

N

Number481OP•11/17/23, 5:07 AM

Your rhino will beep when it loads (unless you have the buzzer disabled in configurator?)

M

MashedPotato•11/17/23, 5:08 AM

No beep, no profile swap

N

Number481OP•11/17/23, 5:11 AM

Send the whole TelemFFB log. I’ve got a couple minutes before I have to log off.

M

MashedPotato•11/17/23, 5:13 AM

TelemFFB_ffff-2055_config.ini_config.user.ini.log5.46KB

N

Number481OP•11/17/23, 5:16 AM

damnit... (my bad).. delete this from your config (both default and user if it exists in there).. this is conflicting with the ESE...

[F-15E]
    #FC3
    type=JetAircraft

[F-15E]
    #FC3
    type=JetAircraft

[F-15E]
    #FC3
    type=JetAircraft

[F-15E]
    #FC3
    type=JetAircraft

N

Number481OP•11/17/23, 5:17 AM

I'll need to push an update to fix that permanently

M

MashedPotato•11/17/23, 5:18 AM

trying without that

NNumber481 damnit... (my bad).. delete this from your config (both default and user if i...

M

MashedPotato•11/17/23, 5:21 AM

still didn't work

MMashedPotato still didn't work

N

Number481OP•11/17/23, 11:55 AM

hmm.. not sure what to say... after deleting the erroneous part of the config per above, it works fine for me.

MMashedPotato still didn't work

N

Number481OP•11/17/23, 12:59 PM

look at your log again and make sure it is not still overwriting the read config from another section.. this is what your previous log said

2023-11-16 22:07:04.484 - INFO - Found section [F-15ESE] for aircraft 'F-15ESE' in config
2023-11-16 22:07:04.485 - INFO - Loading parameters from [DCS.JetAircraft] section
2023-11-16 22:07:04.486 - INFO - Found section [F-15E] for aircraft 'F-15ESE' in config

2023-11-16 22:07:04.484 - INFO - Found section [F-15ESE] for aircraft 'F-15ESE' in config
2023-11-16 22:07:04.485 - INFO - Loading parameters from [DCS.JetAircraft] section
2023-11-16 22:07:04.486 - INFO - Found section [F-15E] for aircraft 'F-15ESE' in config

2023-11-16 22:07:04.484 - INFO - Found section [F-15ESE] for aircraft 'F-15ESE' in config
2023-11-16 22:07:04.485 - INFO - Loading parameters from [DCS.JetAircraft] section
2023-11-16 22:07:04.486 - INFO - Found section [F-15E] for aircraft 'F-15ESE' in config

2023-11-16 22:07:04.484 - INFO - Found section [F-15ESE] for aircraft 'F-15ESE' in config
2023-11-16 22:07:04.485 - INFO - Loading parameters from [DCS.JetAircraft] section
2023-11-16 22:07:04.486 - INFO - Found section [F-15E] for aircraft 'F-15ESE' in config

The bad [F-15E] section was overwriting what you had in the [F-15ESE] section

M

MashedPotato•11/17/23, 2:37 PM

I'll check the most recent log

NNumber481 look at your log again and make sure it is not still overwriting the read config...

M

MashedPotato•11/17/23, 4:05 PM

TelemFFB_ffff-2055_config.ini_config.user.ini.log187.01KB

MMashedPotato Click to see attachment

N

Number481OP•11/17/23, 4:56 PM

that looks normal... its finding your configurator install and its picking up on the vpconf setting... cant say why its not working....

What happens if you do this from a windows command prompt?

"C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\VPforce_FFB_Configurator.exe" -config "C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf"

"C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\VPforce_FFB_Configurator.exe" -config "C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf"

"C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\VPforce_FFB_Configurator.exe" -config "C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf"

"C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\VPforce_FFB_Configurator.exe" -config "C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf"

M

MashedPotato•11/17/23, 5:03 PM

The first one opened VPForce Configurator

M

MashedPotato•11/17/23, 5:03 PM

The 2nd one threw a windows "how do you want to open this"

N

Number481OP•11/17/23, 5:04 PM

you need to run it all as one command

M

MashedPotato•11/17/23, 5:05 PM

That does nothing, doesn't throw an error

M

MashedPotato•11/17/23, 5:05 PM

Doesn't even reopen configurator when I do them both together

N

Number481OP•11/17/23, 5:06 PM

its not supposed to.. thats how you programaticaly load the profiles. That is exactly what TelemFFB does.. so it looks like the problem is not with TelemFFB

N

Number481OP•11/17/23, 5:07 PM

try this too, and make sure it returns the right path to your configurator install..

reg query "HKEY_CURRENT_USER\SOFTWARE\VPforce\RhinoFFB" /s

reg query "HKEY_CURRENT_USER\SOFTWARE\VPforce\RhinoFFB" /s

reg query "HKEY_CURRENT_USER\SOFTWARE\VPforce\RhinoFFB" /s

reg query "HKEY_CURRENT_USER\SOFTWARE\VPforce\RhinoFFB" /s

M

MashedPotato•11/17/23, 5:07 PM

exportPath REG_SZ C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1/configs

N

Number481OP•11/17/23, 5:07 PM

but that shouldn't matter here since its not working straight on the command prompt either

M

MashedPotato•11/17/23, 5:07 PM

That's right'

N

Number481OP•11/17/23, 5:11 PM

and if you actually cd to

 C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1

C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1

 C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1

C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1 and then run

VPforce_FFB_Configurator.exe -config .\configs\F-15E.vpconf

VPforce_FFB_Configurator.exe -config .\configs\F-15E.vpconf

VPforce_FFB_Configurator.exe -config .\configs\F-15E.vpconf

VPforce_FFB_Configurator.exe -config .\configs\F-15E.vpconf?

N

Number481OP•11/17/23, 5:11 PM

and what if you import F-15E.vpfconf manually inside Configurator?

M

MashedPotato•11/17/23, 5:13 PM

Nothing for the cd, and manually importing works

M

MashedPotato•11/17/23, 5:14 PM

Is there a setting or something in configurator that needs to be checked to allow an external profile switch/import?

N

Number481OP•11/17/23, 5:20 PM

best last idea I've got before I have to turn you over to @walmis for help is to try loading this config, which I know %100 works (you can re-load from the device in configurator as long as you dont press the store button first).

M

MashedPotato•11/17/23, 5:21 PM

what am I doing with that file?

N

Number481OP•11/17/23, 5:22 PM

put it in your configs folder and try loading it the same way you have been trying your F-15E.vpconf?

N

Number481OP•11/17/23, 5:22 PM

VPforce_FFB_Configurator.exe -config .\configs\tst.vpconf

VPforce_FFB_Configurator.exe -config .\configs\tst.vpconf

VPforce_FFB_Configurator.exe -config .\configs\tst.vpconf

VPforce_FFB_Configurator.exe -config .\configs\tst.vpconf

M

MashedPotato•11/17/23, 5:22 PM

It didn't beep or anything

N

Number481OP•11/17/23, 5:24 PM

did any of the settings change if you open configurator? the master gain would be at zero if it was sucessful

N

Number481OP•11/17/23, 5:25 PM

actually.. delete that file.. you don't want to load it...

M

MashedPotato•11/17/23, 5:25 PM

nope. it's still on my default profile

N

Number481OP•11/17/23, 5:27 PM

ok.. something else is up then and you'll have to work with walmis to figure it out... the configurator piece isn't something I have any visibility into for troubleshooting

M

MashedPotato•11/17/23, 5:27 PM

Copy, thanks for trying

W

walmis•11/17/23, 5:45 PM

@.mashed.potato. you don't have the beeper disabled by any chance ?

Wwalmis @.mashed.potato. you don't have the beeper disabled by any chance ?

M

MashedPotato•11/17/23, 5:53 PM

No sir, when manually swapping profiles, the beep happens

MMashedPotato No sir, when manually swapping profiles, the beep happens

W

walmis•11/17/23, 6:02 PM

Trying this on my end, gives me the beeps

W

walmis•11/17/23, 6:03 PM

Does the web interface work ok https://vpforcecontrols.com/usb/rhino/ ? i.e. shows axis and button information and firmware version

Wwalmis Does the web interface work ok https://vpforcecontrols.com/usb/rhino/ ? i.e. sho...

M

MashedPotato•11/17/23, 6:04 PM

Nope, that's not showing anything

M

MashedPotato•11/17/23, 6:05 PM

It says device connected, but does not show device firmware or axis movement

W

walmis•11/17/23, 6:11 PM

Try this hack maybe:
🧰support

I know the feature works, so... - check the telemffb log for any clues - post the relevant section i

Similar Threads