Once I'm able to get my hands on a Mk4 extension, I'll might be able to tell more. VKB doesn't even
Once I'm able to get my hands on a Mk4 extension, I'll might be able to tell more. VKB doesn't even stock them yet afaik.
WThere's this, but I need the new connector on both ends.
https://flightsimcontrols.com/product/stick-extension-kit-for-gunfighter-rev-c/
https://flightsimcontrols.com/product/stick-extension-kit-for-gunfighter-rev-c/
VKB FSC Europe
AWhatβs a good way to reduce the vibrations putout by the rhino? I tried a piston plane in dcs for the first time this evening and needless to say the downstairs neighbors were noooot impressed by the rhino..
AWas thinking these paired with these
SAh, would you need an extension and a grip? By the way, I think the description
is wrong. It probably didn't get updated to Mk.IV in the copy-and-paste. As far as I know it's a Mk.IV grip to Mk.IV base extension.
Also, where does the black box go in the VKB Grip-to-Rhino chain?
Extension Kit for Gunfighter Mk.IV
Meant for customers who wish to upgrade their existing Gunfighter Mk.III Tabletop variants with a grip extender."
is wrong. It probably didn't get updated to Mk.IV in the copy-and-paste. As far as I know it's a Mk.IV grip to Mk.IV base extension.
Also, where does the black box go in the VKB Grip-to-Rhino chain?
WAlso, where does the black box go in the VKB Grip-to-Rhino chain?Same as before: GX12 connector to USB
BSo I saw here that curves are a no-no for the Rhino. Is there another way to add a curve/adjust sensitive for small deflections?
FIsn't there a curve setting inside the vpforce app? I'm not sure as I still have to toy around with the settings
JMove?
P@plehmann you could also try DevReorder probably, to do effectively the same, but I haven't tried that. I use HidHide to just hide the simpit from all these primitive games that will pick up pedals or other axis and just use those as if it's a gamepad.
A lot of the big games have very lazy and thoughtless control implementations and it creates problems... But I'm not going to unplug stuff, forget that.
A lot of the big games have very lazy and thoughtless control implementations and it creates problems... But I'm not going to unplug stuff, forget that.
Danyone here know if there is an easy way to shift the center position of the stick? lets say i want the center to be further forward, is the only way to do that messing with the callibration so it thinks that my new center is "true" center or is there a other way?
D(im trying to do something similar as in the F15 where forward travel is alot less than backwards travel on the stick)
THow well does it work as a "standard" stick, in games that don't support force feedback? How does it compare to virpil or winwing bases when used in such a way?
V
RHINO #0265 Has Shipped!V 
RHINO #0266 Has Shipped!
MThe easist way to do this (and the way I have it setup) is to put a 50%ish limit on forward travel of the stick, save that as a profile, and then use telemffb to load that profile when you're in the F-15E.
πgeneral
πgeneral
ALemmmmmme hold a quick 100k to suffice a 3% down payment for any fixer upper where I live in commiefornia..
εHi guys..being out of the loop for quite a while...just wondering is there still any plan announced for natively supporting XP12? I saw TelemFFB supports MSFS but no mentioning of XP at all..
Thx!
Thx!
Fnot that I'm aware of.
BI've had the TMW, VPC CM2 and CM3 bases in the past. IMO the Rhino is the best-feeling base of all of them, even when not using FFB. And note that you can turn on "Hardware Force Trim" in the configurator app, which will let you use the trim hat to physically move the stick around. That has no reliance on any FFB telemetry; it's all done in the Magick Rhino Box 
.
.
Idid anyone ever get a virus warning for the telemffb executable?
Fyes
Iso, is it a virus attached? 
Nits been discussed ad nauseum here on the discord. Windows defender has a hardon for anything compiled with pyinstaller since it is a common way people write malware and deliver it as exe's. In most cases when defender flags a build as malicious, simply changing one character in one line of code and re-compiling it makes it pass. Most people, including myself, simply add an exception to Defender for the folder where TelemFFB is installed.
II didn't get it with defender, but ok, I'll add it to the exceptions
Ithanks!
Fyes, I have sent walmis 9000 dollar cuz he held my pc hostage, but dont tell him that i said this
MYou should be able to set center wherever you want and can also customize a restrictor plate to have hard stops at your preferred limits. It's not uncommon for aircraft have less travel forward than aft on sticks due to the panel/limits of human reach
V 
RHINO #0267 Has Shipped!V 
RHINO #0268 Has Shipped!
AThe EU site is usually a bit slower to pick up on new products as they rely on local stock mostly delivered by ship. The NA site has the grip conversion kits (replacement twist modules) for sale already but not the base conversion kit which would have the female part of the connector.
V RHINO #0270 Has Shipped!V RHINO #0269 Has Shipped!V RHINO #0271 Has Shipped!V 
RHINO #0272 Has Shipped!V RHINO #0273 Has Shipped!
Fwow...they are flying off the shelves now.
PFive Rhinos shipped in one day! 
BI'm actually below a 12 month wait now, by about a day 
B(according to my spreadsheet which could be completely off the mark)
PAverage waiting time from preorder to shipped is *211 days
BYeah, definitely gonna need to update my regression model with these new data points!
P
Fdoes your spreadsheet account for ~50% of people not ordering when they are able to?
BI assume that average is on the units currently shipped and the time since pre-ordered, the length of that cue blew up as some word of mouth really got out in May and after.
I base myself on, granted, a rough and rapidly changing guess.
Based on how many units shipped since sometime in may and the amount of units left before me.
Even if I was going to hit the 210 mark, I am at day 188 now, production would have to increase with about 4 units a week.
Could it be done, maybe, but I'd rather see Walmis have work life balance.
I base myself on, granted, a rough and rapidly changing guess.
Based on how many units shipped since sometime in may and the amount of units left before me.
Even if I was going to hit the 210 mark, I am at day 188 now, production would have to increase with about 4 units a week.
Could it be done, maybe, but I'd rather see Walmis have work life balance.
BIve moved up almost a hundred units, but it's been very stable since this summer so I guess those ahead of me are for now still in it for the long haul.
could that change, absolutely. When I update my sheet it would when it does happen
could that change, absolutely. When I update my sheet it would when it does happen
FI see. the average is steadily but slowly rising.
sadge. I have 380 units before mine. next autumn would be cool.
sadge. I have 380 units before mine. next autumn would be cool.
BThink my first estimates was early q1 2026 so it is at least shrinking
TThat's 3 more than yesterday. My regression model says that tomorrow 8 rhinos will be shipped, then 11 and so on. The queue should be clear in a few weeks. But I don't know what happens then, maybe walmis will start sending them to random people for free...
FIt seems like helicopters, (at least, apache in dcs) apply a shaking effect when transitioning from hover to forward flight. Anybody have an idea wether this is intentional or no and how I could disable it?
TAerodynamic effect called translation. Look it up, all whirly birds do it.