Ultimately, I was not able to get my WinWing F-16 stick working with firmware version 1.0.16 (it wor

Ultimately, I was not able to get my WinWing F-16 stick working with firmware version 1.0.16 (it worked with 1.0.15) despite the debug saying the adapter was fine. I switched to the Virpil Alpha grip.

Raick•11/28/23, 4:21 PM

Hey guys, good morning! The vkb ultimate grip mkv works on rhino?

Raick•11/28/23, 4:21 PM

FlatSpin•11/28/23, 5:05 PM

MK III afaik

Icebeat•11/28/23, 6:20 PM

I don't understand why they need to change the adapter every revision.

IIcebeat I don't understand why they need to change the adapter every revision.

MashedPotato•11/28/23, 6:35 PM

The first one sucked, the last one was good, but flawed. this most recent one, barring any unforseen issues should have much better longevity

Bob Bushman•11/28/23, 6:35 PM

Got to pay for the eight+ year long development time for the throttle somehow I guess.

MashedPotato•11/28/23, 6:36 PM

Such things are the price of not just going with the current and using 5 pin DIN (which sucks ass) like everyone else

Subsonic•11/29/23, 4:03 AM

FYI Tomcat pilots

The latest patch has the FFB trim setting reversed. Unchecked enabled F-14 trim implementation, checks turns it off

amadeus•11/29/23, 6:04 AM

I flew the F14 over the weekend and feel like I didn’t notice this?

RRaick Hey guys, good morning! The vkb ultimate grip mkv works on rhino?

aniron•11/29/23, 8:22 AM

You will need a VKB blackbox to handle the grip, and a VKB adapter from Walmis.
Not sure if he has done any work on a RevC version of that adapter yet, but perhaps it could be modified using a VKB base connector upgrade kit.

Aamadeus I flew the F14 over the weekend and feel like I didn’t notice this? 🤔

Subsonic•11/29/23, 4:09 PM

Yea when I fired it up last night, first time after last patch.....trim would just run away and park itself full aft and then full forward and never respond.
No double mappings, update the stick firmware, sp and mp the same
Disabling FFB Trim in "special, f-14" settings caused it to work again.

PiNKSH!T•11/29/23, 4:44 PM

Hey where do I find the log? I've had the data log running & need to see it

PPiNKSH!T Hey where do I find the log? I've had the data log running & need to see it

blave549•11/29/23, 4:46 PM

it's in the installation directory

Bblave549 it's in the installation directory

PiNKSH!T•11/29/23, 4:48 PM

I'm running vpforce config software from the folder, so it should be in there? I can't find anything with .log

PPiNKSH!T I'm running vpforce config software from the folder, so it should be in there? I...

blave549•11/29/23, 4:49 PM

I thought you were talking about TelemFFB

Bblave549 I thought you were talking about TelemFFB

PiNKSH!T•11/29/23, 4:49 PM

oh sorry, I should of been clear

PiNKSH!T•11/30/23, 9:48 AM

Anyone looking for log file like I was it is in the config software folder & it's a .csv file.

RoyMi6•11/30/23, 12:46 PM

Just received my Rhino and winwing adapter. This looks wrong to me… like I need to rotate with the plug in the adapter or the rhino base… I assume I’m best rotating the winwing adapter plug yes?

walmis•11/30/23, 1:17 PM

Yeah, it's rotateable inside the winwing adapter

RoyMi6•11/30/23, 2:34 PM

Can I just… twist, or do I need to take it apart?

walmis•11/30/23, 2:36 PM

Yeah, definitely no need to take it apart

RoyMi6•11/30/23, 2:42 PM

Cool… well… going to have to be destructive as I’ve stripped the head of one of the 4 screws on the opposite end

RoyMi6•11/30/23, 2:42 PM

I can make it all fit without the 3D printed part/insert with the arrow shown in the picture… any concerns about just removing that?

RoyMi6•11/30/23, 2:48 PM

Or! Keeping that part just not screwing it into place on the adapter. So it’s still in the grip as a spacer, just not held in with those two screws…

walmis•11/30/23, 2:49 PM

You can plug the 6pin WW connector and twist it, it should turn without much resistance

walmis•11/30/23, 2:51 PM

It should align like this

ADCreHc1WosfvqLpqlBFPiFYuHS1NgmV8AocRbNSvh_Z2a9kDikZPRgpiB7cv6D4VLUNNpAzoVl4HaZ9ShQsx-AsMZWHHK619JFIqL-uE5H3mq-wheFZK_WdUziNejGNJdNKK7FC03jDXuXbmY1TfX0gW89x_xVELbqKoztOTL4PARLV5Jxa0VJc8Aibz66QOmfZAR5D-RbI1Ba2pHguALKA9zk_VVUpCEj5cAfqecza9ZQMv84lCae_RoFCrx9Cy70MLWcO4nu-y2NZ0uB6_3ZTs7e_lz3kGtB3Mn-N5Tpwl8bkaibduWErpJVFq6kc2J-AUYIRyav4TuczAJAmG5hL-0gRmfiit8LZr0cNHEGUJpktkBQD32z-3DjZrsppgkIp_S7P9V4cyy6scd9NxxZosr5a4OOgJuGkFr_uGqFIAutJhyLUMz5WUJ59U7DRDFZLddhkRiAzYl8HWnji3zShOdUo_pubuWLOiDJOq4RjqNhsEWruj-GWddmr..png

RoyMi6•11/30/23, 3:02 PM

Ah perfect, I misread your first response! I read it as “definitely no! (Don’t turn it) you need to take it apart”

RoyMi6•11/30/23, 3:02 PM

Boom, done, perfect!

I/JG7_Moto•11/30/23, 7:41 PM

Mine just arrive, cannot connect, I get this error

I/JG7_Moto•11/30/23, 7:41 PM

I/JG7_Moto•11/30/23, 7:41 PM

NotFoundError: Failed to execute 'requestDevice' on 'USB': No device selected.

II/JG7_Moto Click to see attachment

Number481•11/30/23, 7:55 PM

thats the same error you would get if you didn't have a rhino plugged in at all. Are you sure windows is recognizing it?

I/JG7_Moto•11/30/23, 7:58 PM

Its recognized, I plugged it and got a message to connect Rhino so it took me to the connect window

I/JG7_Moto•11/30/23, 7:59 PM

I/JG7_Moto•11/30/23, 8:02 PM

It works now

I/JG7_Moto•11/30/23, 8:47 PM

In DCS I am not getting any effects except for stall buffet, what do I need to do to get the effects?

II/JG7_Moto In DCS I am not getting any effects except for stall buffet, what do I need to d...

Number481•11/30/23, 8:55 PM

TelemFFB is the telemetry app that enables all of the additional effects. DCS native implementation is limited to the dynamic stick forces and stall buffeting as you are experiencing. Head over to #VPforce-TelemFFB and download the latest from the pinned link. You can read up on TelemFFB in the manual linked in #VPforce Rhino WIP Manual

Icebeat•11/30/23, 8:57 PM

any way to have different VPForce configurations, let's say one for helicopters and another for jets?

Icebeat•11/30/23, 8:59 PM

also what is it supposed to do the trim option in DCS, for helicopters, do we need to still enabling trim effect in VPForce effects? Thnaks

IIcebeat any way to have different VPForce configurations, let's say one for helicopters ...

Number481•11/30/23, 9:06 PM

you can use the vpconf config setting inside the TelemFFB config to load any vpf configurator setup for a whole sim, aircraft category or specific aircraft, depending on where you put the setting in the config: 📃general

TelemFFB does not do anything special for helicopter trim in DCS. That is all handled by the native FFB implementation and the force-trim settings in DCS (for all modules you will want either the "instant" or "default" in their special settings, depending on the module).

Icebeat•11/30/23, 9:08 PM

thank you

PPoor Yurik I.e. no snap-to-center effect

Icebeat•11/30/23, 9:43 PM

I have this problem when I enable friction, if I disable it, it return to the strimmer center

IIcebeat I have this problem when I enable friction, if I disable it, it return to the st...

Poor Yurik•11/30/23, 9:44 PM

If you read the subsequent messages above, it turned out that I didn't have a config or hw issue. I simply misunderstood the intended behavior.

I/JG7_Moto•12/1/23, 1:46 AM

Pitch forces feel softer than roll , what setting do I need to change to make them equal?

I/JG7_Moto•12/1/23, 2:52 AM

Bu the way Telem FFB introduced a virus that has been a pain in the ass to remove.

I/JG7_Moto•12/1/23, 2:54 AM

I clicked on the FFB screen on the link on the bottom left corner and that inmediatelly started the virus

Number481•12/1/23, 3:25 AM

There is no virus in TelemFFB. Hundreds of people in here are running it. The source is open on GitHub too if you want to look at it.

Windows defender and some other AV tools will sometimes flag it as a virus however. This is because it is written in Python and compiled with ‘pyinstaller’ which can sometimes result in certain file hashes that are often found in low tech malware that is commonly also written in Python and compiled with pyinstaller.

�𝔐𝔬𝔯𝔭𝔥𝔦𝔫𝔢 💀Ultimately, I was not able to get my WinWing F-16 stick working with firmware ve...

RoyMi6•12/1/23, 10:46 AM

@walmis after getting my adpater in place yesterday I've only now got around to testing it and I'm unable to get my WinWing F18 stick buttons working. Firmware is v1.0.16 - any suggestions?

RoyMi6•12/1/23, 10:48 AM

Not a single WinWing button is highlighting when clicked in...
1) Microsoft game controllers (which I realise I should ignore anyway)
2) The WebUSB tool
3) The RAW BTN column in the VPforce Configurator

I have grip type selected as "WinWing Adapter" but I've tried all the others as well (just to test) and nothing is working

Llegobirds None of the buttons worked, no reaction

RoyMi6•12/1/23, 10:50 AM

Legobirds - do you get yours working?

Ultimately, I was not able to get my WinWing F-16 stick working with firmware version 1.0.16 (it wor

Similar Threads