does bazzite deck version support enabling HDR? I have HDR via gamescope running on my current arch

does bazzite deck version support enabling HDR? I have HDR via gamescope running on my current arch install, so I am wondering if the same is possible on bazzite

MMatthias does bazzite deck version support enabling HDR? I have HDR via gamescope running...

Kyle Gospo•12/1/23, 9:06 AM

you should have this capability under the :testing:testing branch

MatthiasOP•12/1/23, 9:06 AM

cool thanks!

Sean (SuperRiderTH)•12/1/23, 9:20 AM

welp, I can't seem to get the VM to passthrough the iGPU of the deck. I can get it to disconnect and the VM starts and according to the logs it seems to be fine with it, but I don't get any video output to the deck.

Heck, I can shutdown the VM and I get the display back. Nothing automatically starts back up because I sure don't know how all the pieces here work, but if I tell the deck to reboot remotely I get the whole animation for rebooting.

Perhaps if someone is smarter than me or more stubborn it might work out. But it is late and I am tired lol.

dw | uzay•12/1/23, 9:57 AM

when I put my Steam Deck in the dock, the deck screen's backlight stays on. is there a way to turn that off?

SSean (SuperRiderTH)welp, I can't seem to get the VM to passthrough the iGPU of the deck. I can get ...

HikariKnight•12/1/23, 10:03 AM

havent really checked at the deck itself but i dont think passing through the apu will work well. not sure how the iommu layout even is on the deck.
but hey at least the system didnt freeze up on you, thats something.

from my experience some amdgpus require you to passthrough a dumped version of the vbios rom too, which i dont think the apu has?
can easily find the path for the ROM to dump though using my ls-iommu tool by doing ls-iommu -g --romls-iommu -g --rom

GitHub

GitHub - HikariKnight/ls-iommu: A tool to list devices in iommu gro...

A tool to list devices in iommu groups, useful for setting up VFIO - GitHub - HikariKnight/ls-iommu: A tool to list devices in iommu groups, useful for setting up VFIO

Ddw | uzay when I put my Steam Deck in the dock, the deck screen's backlight stays on. is t...

RodoMa92•12/1/23, 12:17 PM

Kernel is broken.

RodoMa92•12/1/23, 12:18 PM

It has been fixed a month ago by AMD, but it's probably not in kernel yet.

RodoMa92•12/1/23, 12:18 PM

(The power sequencing for DP was broken and the display never powered off the backlight)

KKyle Gospo @EyeCantCU @j0rge FYI, we passed 300K pulls on Bazzite alone

EyeCantCU•12/1/23, 12:47 PM

848 stars too. It's crazy how far things have come

Valerie•12/1/23, 12:47 PM

What's the updated Ublue pulls leaderboard

VValerie What's the updated Ublue pulls leaderboard

EyeCantCU•12/1/23, 12:50 PM

It's about what I'd expect

Ttryhardsoccermomswag like termdisc, i also have it on a seperate drive. it does disappear in GRUB fo...

SpookySouls•12/1/23, 1:43 PM

Yeah, i have two seperate M.2 SSDs for each boot option, but when i take a look at the drive in KDE partition editor, it only had two partitions, I thought it was supposed to have four

VVaris CoolerControl is a quite the quality piece of software - https://gitlab.com/cool...

The Sun•12/1/23, 2:26 PM

Hi Varis, I need to install Coolercontrol to manage my Kraken X63 and I am investigating what would be the best approach. Flatpak has been abandoned but you say you layered it with rpm-ostree with us being immutable did you manage to load the systemd unit and have it always load on boot? also does it cause any problems when updating? The other option is 2 appimages one for systemd and the other for the app but I'm not sure if the systemd one can be made persistent to always load on boot. Any help you can provide will be greatly appreciated

TThe Sun Hi Varis, I need to install Coolercontrol to manage my Kraken X63 and I am inves...

Varis•12/1/23, 2:31 PM

Yeah, I just layered it. Works perfectly

systemd unit also just works. Also, dont forget to check out the new UI on http://localhost:11987

Varis•12/1/23, 2:31 PM

No issues updating

VVaris Yeah, I just layered it. Works perfectly 👌 systemd unit also just works. Also, ...

The Sun•12/1/23, 2:33 PM

Many thanks!

VVaris how do I configure that a kernel module be always loaded after a reboot? I found...

Varis•12/1/23, 2:37 PM

Just needed this module (in reply msg) to get loaded for it to see my mobo's fan controllers

VVaris Just needed this module (in reply msg) to get loaded for it to see my mobo's fan...

The Sun•12/1/23, 2:40 PM

thanks the Kraken doesn't need any special module at least I didn't need any previously in Arch

The Sun•12/1/23, 2:45 PM

@varijus Sorry Varis one last thing, where did you find the RPMs? they don't seem to exist in the official repos neither in RPM fusion

TThe Sun thanks the Kraken doesn't need any special module at least I didn't need any pre...

Varis•12/1/23, 2:53 PM

put this file in /etc/yum.repos.d. You can also find it following the links in the repository readme somewhere

coolercontrol-coolercontrol_rpm.repo1.52KB

Varis•12/1/23, 2:53 PM

then you will able to use rpm-ostree installrpm-ostree install

VVaris put this file in /etc/yum.repos.d. You can also find it following the links in t...

The Sun•12/1/23, 3:01 PM

fantastic thank you for the file! I also finally found the repo from the official readme, it was well hidden for some reason they kept insisting on us using a bash script to configure it which obviously doesn't work with Silverblue.

TThe Sun fantastic thank you for the file! I also finally found the repo from the officia...

Varis•12/1/23, 3:10 PM

The file from the readme has some hardcoded versions and will stop working with a next fedora release. I changed them to be dynamic. You can compare them to see the difference

VVaris The file from the readme has some hardcoded versions and will stop working with ...

The Sun•12/1/23, 3:12 PM

Precious information Varis thank you so much! I'm in the process of generating my own file to learn how it works but then I will certainly apply your changes manually in the .repo file

Bartley•12/1/23, 4:37 PM

I finally rebased from silverblue-asus to bazzite-gnome-asus.

Pretty noticable performance jump.

Bartley•12/1/23, 4:43 PM

It's probably the system76 scheduler at work

The Sun•12/1/23, 4:50 PM

OK so I learned that if you want to add a custom repository to Silverblue/Bazzite you need a special configuration .rpm file and then you just do "rpm-ostree install..." . If the repository doesn't have that special .rpm then you need to create your own .repo file inside "/etc/yum.repos.d". As for gpg keys you just copy them to "/etc/pki/rpm-gpg/" and point your .repo file to your key. - just leaving this in here for other noobs like me

moe•12/1/23, 6:10 PM

anyone know how to enable the build in sdgyrodsu is it a systemd service?

moe•12/1/23, 6:10 PM

or simple "sdgyrodsu"

moe•12/1/23, 6:16 PM

nvm it's systemctl --user instead of sdgyrodsu

TThe Sun OK so I learned that if you want to add a custom repository to Silverblue/Bazzit...

bsherman•12/1/23, 6:23 PM

adding a .repo.repo file to /etc/yum.repos.d/etc/yum.repos.d is pretty standard for Fedora/RedHat systems. The gpg keys can trip people up... you can add them manually as you say and also checkout rpmkeys --importrpmkeys --import

A configuration .rpm is just a way for someone to package those actions for reuse by others. Very helpful for sharing configuration (like we do in universal blue), but not needed for individuals.

Brunvik•12/1/23, 6:41 PM

Hello everyone, I mean I can perfectly stay on :latest but still I want to ask. On my PC If I rebase to :testing or :unstable I‘ve been met with an error in Grub that I need to load the Kernel first. Someone here who had this issue too?