interesting... send me your userconfig if you don't mind... I'd like to investigate why its failin

interesting... send me your userconfig if you don't mind... I'd like to investigate why its failing. If the config worked with the previous TelemFFB without error, it should convert over.

NNumber481 interesting... send me your userconfig if you don't mind... I'd like to invest...

Mr. S•1/9/24, 8:11 PM

sure, DM?

Number481OP•1/9/24, 8:12 PM

that works

TonyM•1/9/24, 9:48 PM

TelemFFB (3017d8df) shows errors for HPG160 and MSFS
But telemffb_controls_axes is enabled and cyclic axes are not bind.
How can I solve this?

TonyM•1/9/24, 9:54 PM

telemffb_controls_axes = enable in the 2 locations.

TonyM•1/9/24, 9:55 PM

Not working

TTonyM Not working 😦

Number481OP•1/9/24, 10:03 PM

resolve the issue in the log message....

WARNING - joystick - Force trim enabled but buttons not configured

WARNING - joystick - Force trim enabled but buttons not configured

and

ERROR - joystick - Aircraft is configured as class HPGHelicopter.  For proper integration, TelemFFB must send axis position to MSFS.

ERROR - joystick - Aircraft is configured as class HPGHelicopter.  For proper integration, TelemFFB must send axis position to MSFS.

I'll look to see if there's an issue with the default settings because the axis control should be enabled by default for those helicopters

NNumber481 resolve the issue in the log message.... ```WARNING - joystick - Force trim ...

TonyM•1/9/24, 10:13 PM

Axis control checked now! And button configured!
Thanks!

Final Glide•1/10/24, 12:02 AM

I've been having a play with the latest version of Telem FFB and enjoying all the work put into the new UI. I did notice when I got in the spitfire in DCS that there was no elevator droop when not moving and I couldn't find any section to adjust that value. Am I just been stupid by not seeing it or was it missed in the initial rollout?

Final Glide•1/10/24, 12:54 AM

Also can't find settings such as ground touch down.

FFinal Glide I've been having a play with the latest version of Telem FFB and enjoying all th...

Number481OP•1/10/24, 1:00 AM

looks like elevator droop was, in fact, missed... but the touchdown effect should be part of 'runway rumble'

Final Glide•1/10/24, 1:08 AM

I just tried changing runway rumble from 100% to 0% using the Gazelle and noticed no change when doing a heavy landing. Just to be sure I went to another module in between just to make sure the setting changes were loaded.

FFinal Glide I just tried changing runway rumble from 100% to 0% using the Gazelle and notice...

Number481OP•1/10/24, 1:25 AM

you sure? whats your constant force slider set to in vpf configurator?

Final Glide•1/10/24, 1:27 AM

Constant force slider set to 100% in vpf config

Number481OP•1/10/24, 1:32 AM

ok... you should be able to feel something (albiet potentially small) when doing a (rough) landing.. but you are onto something as the max range in the default config is not big enough.. thats a weird setting that sometimes needs to be >1.0 to be felt and the current defaults are limiting it to 0.4 or less.. next update will allow the setting to go up to 4.0 (will still be a slider of %0-100) which will have the ability to really jolt you during a rough landing

Final Glide•1/10/24, 1:40 AM

'awaits the future broken wrist

Thanks for all the awesome work!

Tinman•1/10/24, 2:41 PM

I understand that motor Y usually is hotter, but mine has a difference of 10c, is that ok?

Tinman•1/10/24, 2:42 PM

there

walmis•1/10/24, 3:06 PM

Yeah, don't worry about the temps

356thFS_Piranha•1/10/24, 6:04 PM

When i try to run Telem It's blocked by my malware protector because it detects Neshta.Virus.FileInfector.DDS.

356thFS_Piranha•1/10/24, 6:05 PM

Is this safe? Should I allow this file?

Snooper•1/10/24, 6:17 PM

Hello, anyone would be so kind to tell me the exact measurements of the screw thread of the stick and base? Are they imperial or euro?

3356thFS_Piranha When i try to run Telem It's blocked by my malware protector because it detects ...

Number481OP•1/10/24, 6:33 PM

🧰support

356thFS_Piranha•1/10/24, 9:16 PM

I get the fallowing error when launching
Telem

356thFS_Piranha•1/10/24, 9:18 PM

I was using it succefully earlier but tried to copy one plames setting to another then this erroe.

3356thFS_Piranha I was using it succefully earlier but tried to copy one plames setting to anothe...

Number481OP•1/10/24, 9:24 PM

when you say copy, you mean cloning a new aircraft through the 'create new aircraft' dialog?

356thFS_Piranha•1/10/24, 9:24 PM

Yes, Ithink so

Number481OP•1/10/24, 9:29 PM

can you drop a copy of the user config in here? located in Users\<your username>\AppData\Local\VPForce-TelemFFB\userconfig.xmlUsers\<your username>\AppData\Local\VPForce-TelemFFB\userconfig.xml

Then after dropping it here, try to delete file and rename the userconfig.xml.backupuserconfig.xml.backup to userconfig.xmluserconfig.xml and see if TelemFFB will start

356thFS_Piranha•1/10/24, 9:33 PM

message.txt7.47KB

356thFS_Piranha•1/10/24, 9:35 PM

message.txt7.47KB

Number481OP•1/10/24, 9:37 PM

maybe try to zip it up first.. not sure if discord is mangling the text when trying to paste the xml file or what

356thFS_Piranha•1/10/24, 9:39 PM

message.zip1.11KB

356thFS_Piranha•1/10/24, 9:40 PM

That didn't work

356thFS_Piranha•1/10/24, 9:41 PM

Still won't start

Number481OP•1/10/24, 9:51 PM

the zip still contains a file called message.txt that has the same content as the two above posts.

If the backup is also corrupted, best to just delete the userconfig.xml and start TelemFFB. It will create a new one. If it fails again when you clone, try to zip up the actual xml file and send it

356thFS_Piranha•1/10/24, 9:53 PM

Thanks for your help!!

message.txt22.16KB

356thFS_Piranha•1/10/24, 9:53 PM

Is this what your looking for?

356thFS_Piranha•1/10/24, 9:55 PM

Great! got it started

3356thFS_Piranha Is this what your looking for?

Number481OP•1/10/24, 9:58 PM

yes. Is that the one that was failing ?

356thFS_Piranha•1/10/24, 9:58 PM

Yes

tomatoflames•1/11/24, 2:40 AM

Good evening!

I had a question regarding order#587. I was invoiced and paid the order, and the order status changed to "paid." Then I was invoiced again, but this time for a lower amount? The charge shows on my credit card statement.

Ttomatoflames Good evening! I had a question regarding order#587. I was invoiced and paid th...

walmis•1/11/24, 7:42 AM

You can disregard that, clerical error. Will ship it today.

Snubblaren•1/11/24, 10:31 AM

anyone who had problems with avira moving telemffb to quarantine?

SSnubblaren anyone who had problems with avira moving telemffb to quarantine?

Number481OP•1/11/24, 12:17 PM

🧰support

DAPA•1/11/24, 5:54 PM

Hi @walmis ...I have a question for you - I recently bought the new v2 Realsimulator FA-18 stick handle to use with my RS FSSB side stick. I'd really like to use it with the Rhino as well, and for the most part it works with the 64-button Generic Grip profile in the VPforce configurator, except for a few buttons which won't register or map in the button mapping section. They show as buttons 62 & 63 in the Realsimulator config tool, but no dice on VPForce. Is there something I can do to help troubleshoot this to figure it out?

DAPA•1/11/24, 5:55 PM

This is the handle I bought (F18CGRH v2):

DAPA•1/11/24, 5:55 PM

https://realsimulator.com/f-18-center-grips/

Realsimulator

F-18 Center Grips - Realsimulator | Online Shop

F-18 center grips have the true and ergonomic F/A-18E Super Hornet shape and are manufactured in high density resin in a one-piece body construction. Visit us for more info.

DAPA•1/11/24, 5:55 PM

FYI - the RS F-16 grip works great with the Rhino profile.

356thFS_Piranha•1/11/24, 6:05 PM

Is there a way to turn down the volume of the buzzing the VPforce makes when lowering and raising the landing gear? The flaps are fine, not that load.

Number481OP•1/11/24, 6:13 PM

356thFS_Piranha•1/11/24, 9:17 PM

Can the Telem adjustments be made while flying the sim? And it says to turn shake to ) in IL2 but do you check IL2 Shake Master in the Telem App?

interesting... send me your userconfig if you don't mind... I'd like to investigate why its failin

Similar Threads