But I certainly suggest to read this part, about the Generic Part Numbers: https://github.com/Em

But I certainly suggest to read this part, about the Generic Part Numbers:
https://github.com/Embeetle/tiny-scarab/blob/main/documentation/production_files.md#generic-part-numbers

GitHub

tiny-scarab/documentation/production_files.md at main · Embeetle/ti...

Tiny beetle board based on the CH32V003 10-cent chip. - Embeetle/tiny-scarab

kristof-at-embeetleOP•1/15/24, 8:42 PM

I've tried to make the main

README.md

README.md

page as clear as possible, with a nice overview and indexation. Please let me know if you find the documentation sufficiently clear.

Kkristof-at-embeetle I've tried to make the main `README.md` page as clear as possible, with a nice o...

JeremyCook•1/15/24, 9:51 PM

"There's no need to wire up anything. Just plug the Tiny Scarab in your computer and start coding!"

I suppose my question would be is it a dev board a la Arduino Uno, or is it a sort of GPIO pass-through that you control via your computer? Or is it something else? Maybe a TL:DR summary of what is it exactly? Nice looking board though, as are the docs aesthetics-wise.

kristof-at-embeetleOP•1/15/24, 9:56 PM

Hi @JeremyCook ,
It's a development board for the

CH32V003F4P6

CH32V003F4P6

microcontroller. That means you can write code in any IDE and flash it to the chip (although we hope you will use Embeetle IDE).

The board has an on-board flash/debug probe which you connect to the computer with a USB-C cable.

I'll rewrite that part in the documentation to make this clearer

Ttechielew Hey @everyone! If you haven’t yet, follow our LinkedIn page! We’re pushing to ge...

techielew•1/16/24, 6:37 AM

Thanks y’all. We are now over 150 LI followers and have applied for streaming privileges so Office Hours and other segments will now be opened up to the world - pending LI approval, of course

Kkristof-at-embeetle I've tried to make the main `README.md` page as clear as possible, with a nice o...

techielew•1/16/24, 6:41 AM

This is very easy to read. Thanks!

My first question is what does this mean:

“The Beetle Boards will get special attention in Embeetle IDE.”

techielew•1/16/24, 6:49 AM

My next comment is that @Petr Dvořák and @pallavaggarwal may have a decent handle on board gave depending where you’re looking to have it manufactured.

@pallavaggarwal, @Umesh Lokhande, what did Altium do to the Gumstix brand? Is there still a low volume quick manufacturing option through them in the west?

Kkristof-at-embeetle Hi guys, Please have a look at the **Tiny Scarab** board design: https://github...

techielew•1/16/24, 6:50 AM

What is the cost at Eurocircuits? Have you considered a kickstarter?

Petr Dvořák•1/16/24, 6:56 AM

@techielew Because of the Chinese chips, I would consider JLCPCB or similar companies. Everything else probably brings more headaches and higher cost.

Petr Dvořák•1/16/24, 6:57 AM

Another plus is that JLCPCB offers 3D printing and CNC machining. @kmulier can design an enclosure or some kind of accessories easy to order there.

PPetr Dvořák Another plus is that JLCPCB offers 3D printing and CNC machining. @kmulier can d...

techielew•1/16/24, 7:02 AM

@Padmalaya Rawal would you be interested in supporting/collaborating in this regard? See above.

Kkristof-at-embeetle But I certainly suggest to read this part, about the **Generic Part Numbers**: h...

techielew•1/16/24, 7:03 AM

Is Alibaba the only WCH distributor at this time?

Ttechielew @Padmalaya Rawal would you be interested in supporting/collaborating in this reg...

Padmalaya Rawal•1/16/24, 10:15 AM

I would love to contribute @techielew .

@kmulier As your board is open source, you can apply for OSHWA certification which is free. And then you can ask people at OSH Park for your initial PCB fabrication. And if you are considering to produce them in bulk I think it will be better option to ask JLC or PCBWay for the sponsorship. They will reduce their prices in the exchange of their name to be there on prmotional material and github. I hope it helps

kristof-at-embeetleOP•1/16/24, 12:35 PM

Thank you guys.

Yes, Alibaba is now the only distributor for WCH outside China.

Thanks for the tips. So right now, the options for a prototype production are:

Eurocircuits (800 euro for 10 pieces, this includes assembly)
JLC
PCBWay
OSH

scitechindian•1/16/24, 12:52 PM

Hello all

Sscitechindian Hello all

Umesh Lokhande•1/16/24, 1:04 PM

Hi, @scitechindian welcome to the community!

Petr Dvořák•1/16/24, 1:25 PM

@kmulier Be aware, those sponsorships can backfire easily.

Saßì•1/16/24, 2:14 PM

Friendly Reminder about Upcoming Event
https://discord.com/invite/McSvxeCg?event=1196809694661054556

vishal_bhimrao_zuluk•1/16/24, 4:05 PM

Namaskar

everyone

Vvishal_bhimrao_zuluk Namaskar 🙏 everyone

Umesh Lokhande•1/16/24, 4:17 PM

Hi Vishal, Welcome!

vishal_bhimrao_zuluk•1/16/24, 4:18 PM

Thank you @Umesh Lokhande

Hamid Sheibani•1/16/24, 6:37 PM

Hi my friends

HHamid Sheibani Hi my friends

Umesh Lokhande•1/16/24, 6:49 PM

Hi @Hamid Sheibani Welcome! please feel free to introduce your technical background and what projects you’re working on!

Awais•1/16/24, 6:50 PM

Hello All

ArcaneMike•1/16/24, 6:51 PM

Happy to have you all here! popsYAY

ArcaneMike•1/16/24, 6:52 PM

Don't forget @Unverified members, head to #

-verification-

to chat with the server.

shardul17•1/16/24, 6:59 PM

Hello all,
This is Shardul from Mumbai!
I am currently working with a mumbai based startup in Embedded Domain, Specially in industry 4.0 and IIoT. Mostly i play with ESP microcontrollers and Linux based systems.

2021 BE Passout with 1 year of experience in Accenture as an Associate Software Engineer. PG Diploma in Embedded System Design from CDAC.

pallavaggarwal•1/16/24, 7:00 PM

Welcome @shardul17!

shardul17•1/16/24, 7:06 PM

Thank you @pallavaggarwal

techielew•1/16/24, 7:14 PM

Hey guys,
We have recently started a weekly demo series. We kicked off with @Umesh Lokhande on professional firmware debugging tips.

Check it out here: https://www.youtube.com/watch?v=cRSAceb0hJM

YouTubeDevHeads

Debugging Arm Cortex-M Microcontroller Firmware in the STM32CubeIDE

Firmware developers always want to hit the "easy button", especially when debugging large professional development projects. A common way of achieving this is by using the serial terminal rather than leveraging professional debuggers.

But as codebases grow and firmware becomes more complex, these shortcuts can quickly become huge time sucks, an...

Ttechielew Hey guys, We have recently started a weekly demo series. We kicked off with @Ume...

techielew•1/16/24, 7:16 PM

If you have questions or comments about this or could use development tips from @Umesh Lokhande, check out this thread: 🪲-firmware-and-baremetalHow to Debug STM32 ARM Cortex-M Microcontroller using STM32CubeIDE

sujitmishra•1/16/24, 7:19 PM

Hello everyone,
This is Sujit Mishra from Delhi. Currently I am working in a water purifier industry and loves to add tech into our products. I have hands on PIC, Arduino & ESP MCU. I want to explore commercial IOT projects and need guidance to go further.

Ssujitmishra Hello everyone, This is Sujit Mishra from Delhi. Currently I am working in a wat...

techielew•1/16/24, 7:35 PM

Hey @sujitmishra, welcome! We'd love to see you in the office hours meetup on Friday (check out the events tab). What areas of development are you focused on right now? Interested in learning where we can help!

techielew•1/16/24, 8:03 PM

@pallavaggarwal selected Windows over Linux in the poll?! https://discord.com/channels/1130679493799977062/1130679493799977066/1196896462542491719 WTH? SMH.

JeremyCook•1/16/24, 9:00 PM

Hello everyone - working on a presentation about Crowdfunding. Series context has to do with Arduino, but any funded project might be interesting. Is there anyone on here that has done a successful project on one of these platforms and would like to offer some tips? Or anyone you might recommend?

gKarthikSai•1/16/24, 9:17 PM

Hello everyone....i am karthik an currently pursuing my engineering in electronics and communications. I am interested in embedded systems and FPGA based design. I have worked with STM, arduino and raspberry pi.

JJeremyCook Hello everyone - working on a presentation about Crowdfunding. Series context ha...

techielew•1/16/24, 10:42 PM

I am trying to see if @Padmalaya Rawal has

Rohith sai•1/16/24, 10:46 PM

Hello folks, this is Rohith Sai, I'm a embedded software developer with 3 years of experience in Autosar development at Visteon for automotive cluster and also worked as BMS software developer.

Currently I'm pursuing my Masters degree in embedded systems and electrical engineering at Ravensburg-Weingarten University of Applied Sciences in Germany.
Happy to help and learn

.

And currently looking for part time work student opportunities in Germany.

Cheers !!

RRohith sai Hello folks, this is Rohith Sai, I'm a embedded software developer with 3 years ...

techielew•1/16/24, 11:10 PM

Welcome, Rohith! Good to meet you! By BMS I'm assuming you mean battery management system, right?

GgKarthikSai Hello everyone....i am karthik an currently pursuing my engineering in electroni...

techielew•1/16/24, 11:19 PM

Welcome @gKarthikSai, you and @Navadeep would get along great! He's a fellow FPGA developer. What types of FPGAs have you worked with to-date?

If there's anything you need help with, feel free to post over in the forum channels. We also hope you can join us for Office Hours this Friday at 15:00 GMT https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1.

Mary Princy•1/16/24, 11:26 PM

Hi , I am Mary Princy. Recently completed certification in Embedded Systems from University of California Irvine. Currently looking for entry level job openings in Embedded Software Development. I live in Rhode Island, USA.

MMary Princy Hi , I am Mary Princy. Recently completed certification in Embedded Systems from...

techielew•1/16/24, 11:58 PM

Nice, welcome Mary! Any specific specialty or interest within embedded SW or area of industry you'd like to work in?

AAwais Hello All

techielew•1/17/24, 12:09 AM

Hey Awais, welcome! Tell us about your technical background.

What are you working on atm? Throw it in #projects-and-self-promotion!

MMary Princy Hi , I am Mary Princy. Recently completed certification in Embedded Systems from...

techielew•1/17/24, 12:10 AM

BTW, congrats!

Ttechielew Nice, welcome Mary! Any specific specialty or interest within embedded SW or are...

Mary Princy•1/17/24, 12:17 AM

I need a start actually. In the form of internships /voluntary job or entry level positions. Couldn’t get a chance to do internships during the course because I had no work permit then.

techielew•1/17/24, 12:20 AM

@Marcweb is actually a recruiter who sources passive candidates. Connect with him. Let him know if you have any clearances, visa requirements, special skills/circumstances and you'll at a minimum make it into his database for when jobs come up: https://www.linkedin.com/in/marcusbwebster/.

Realk.o•1/17/24, 12:43 AM

Hello

RRealk.o Hello

techielew•1/17/24, 1:04 AM

What's up @Realk.o

Ttechielew What's up @Realk.o

Realk.o•1/17/24, 1:05 AM

It's cool, was checking around, and I saw a lot of tags so I decided to look it up

RRealk.o It's cool, was checking around, and I saw a lot of tags so I decided to look it ...

techielew•1/17/24, 1:06 AM

Nice, what's your technical background? What do you do for work/school?

Ttechielew Hey Awais, welcome! Tell us about your technical background. What are you work...

Awais•1/17/24, 2:14 AM

Hi @techielew
I am working on a smart cat collar project based on Samd21

But I certainly suggest to read this part, about the **Generic Part Numbers**: https://github.com/Em

But I certainly suggest to read this part, about the Generic Part Numbers: https://github.com/Em