Hello everyone, This is Sujit Mishra from Delhi. Currently I am working in a water purifier industr

Hello everyone,
This is Sujit Mishra from Delhi. Currently I am working in a water purifier industry and loves to add tech into our products. I have hands on PIC, Arduino & ESP MCU. I want to explore commercial IOT projects and need guidance to go further.

Ssujitmishra Hello everyone, This is Sujit Mishra from Delhi. Currently I am working in a wat...

techielew•1/16/24, 7:35 PM

Hey @sujitmishra, welcome! We'd love to see you in the office hours meetup on Friday (check out the events tab). What areas of development are you focused on right now? Interested in learning where we can help!

techielew•1/16/24, 8:03 PM

@pallavaggarwal selected Windows over Linux in the poll?! https://discord.com/channels/1130679493799977062/1130679493799977066/1196896462542491719 WTH? SMH.

JeremyCook•1/16/24, 9:00 PM

Hello everyone - working on a presentation about Crowdfunding. Series context has to do with Arduino, but any funded project might be interesting. Is there anyone on here that has done a successful project on one of these platforms and would like to offer some tips? Or anyone you might recommend?

gKarthikSai•1/16/24, 9:17 PM

Hello everyone....i am karthik an currently pursuing my engineering in electronics and communications. I am interested in embedded systems and FPGA based design. I have worked with STM, arduino and raspberry pi.

JJeremyCook Hello everyone - working on a presentation about Crowdfunding. Series context ha...

techielew•1/16/24, 10:42 PM

I am trying to see if @Padmalaya Rawal has

Rohith sai•1/16/24, 10:46 PM

Hello folks, this is Rohith Sai, I'm a embedded software developer with 3 years of experience in Autosar development at Visteon for automotive cluster and also worked as BMS software developer.

Currently I'm pursuing my Masters degree in embedded systems and electrical engineering at Ravensburg-Weingarten University of Applied Sciences in Germany.
Happy to help and learn

.

And currently looking for part time work student opportunities in Germany.

Cheers !!

RRohith sai Hello folks, this is Rohith Sai, I'm a embedded software developer with 3 years ...

techielew•1/16/24, 11:10 PM

Welcome, Rohith! Good to meet you! By BMS I'm assuming you mean battery management system, right?

GgKarthikSai Hello everyone....i am karthik an currently pursuing my engineering in electroni...

techielew•1/16/24, 11:19 PM

Welcome @gKarthikSai, you and @Navadeep would get along great! He's a fellow FPGA developer. What types of FPGAs have you worked with to-date?

If there's anything you need help with, feel free to post over in the forum channels. We also hope you can join us for Office Hours this Friday at 15:00 GMT https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1.

Mary Princy•1/16/24, 11:26 PM

Hi , I am Mary Princy. Recently completed certification in Embedded Systems from University of California Irvine. Currently looking for entry level job openings in Embedded Software Development. I live in Rhode Island, USA.

MMary Princy Hi , I am Mary Princy. Recently completed certification in Embedded Systems from...

techielew•1/16/24, 11:58 PM

Nice, welcome Mary! Any specific specialty or interest within embedded SW or area of industry you'd like to work in?

AAwais Hello All

techielew•1/17/24, 12:09 AM

Hey Awais, welcome! Tell us about your technical background.

What are you working on atm? Throw it in #projects-and-self-promotion!

MMary Princy Hi , I am Mary Princy. Recently completed certification in Embedded Systems from...

techielew•1/17/24, 12:10 AM

BTW, congrats!

Ttechielew Nice, welcome Mary! Any specific specialty or interest within embedded SW or are...

Mary Princy•1/17/24, 12:17 AM

I need a start actually. In the form of internships /voluntary job or entry level positions. Couldn’t get a chance to do internships during the course because I had no work permit then.

techielew•1/17/24, 12:20 AM

@Marcweb is actually a recruiter who sources passive candidates. Connect with him. Let him know if you have any clearances, visa requirements, special skills/circumstances and you'll at a minimum make it into his database for when jobs come up: https://www.linkedin.com/in/marcusbwebster/.

Realk.o•1/17/24, 12:43 AM

Hello

RRealk.o Hello

techielew•1/17/24, 1:04 AM

What's up @Realk.o

Ttechielew What's up @Realk.o

Realk.o•1/17/24, 1:05 AM

It's cool, was checking around, and I saw a lot of tags so I decided to look it up

RRealk.o It's cool, was checking around, and I saw a lot of tags so I decided to look it ...

techielew•1/17/24, 1:06 AM

Nice, what's your technical background? What do you do for work/school?

Ttechielew Hey Awais, welcome! Tell us about your technical background. What are you work...

Awais•1/17/24, 2:14 AM

Hi @techielew
I am working on a smart cat collar project based on Samd21

AAwais Hi @techielew I am working on a smart cat collar project based on Samd21

techielew•1/17/24, 2:15 AM

Please tell me you have a picture of that
Can you post said picture in #projects-and-self-promotion?
Lol

Ttechielew 1. Please tell me you have a picture of that 2. Can you post said picture in #pr...

Awais•1/17/24, 2:22 AM

Sorry I can’t share the picture

AAwais Hi @techielew I am working on a smart cat collar project based on Samd21

ArcaneMike•1/17/24, 2:22 AM

I have cats. What is the goal of the product?

AArcaneMike I have cats. What is the goal of the product?

Awais•1/17/24, 2:23 AM

To track and train them for not going into specific zones

AAwais To track and train them for not going into specific zones

techielew•1/17/24, 2:23 AM

like a shock collar?

Ttechielew like a shock collar?

Awais•1/17/24, 2:23 AM

No No
No shocking at all

AAwais No No No shocking at all

techielew•1/17/24, 2:25 AM

haha, okay. so what are the components of the system?

Ttechielew haha, okay. so what are the components of the system?

techielew•1/17/24, 2:25 AM

besides SAMD21

AAwais To track and train them for not going into specific zones

ArcaneMike•1/17/24, 2:26 AM

Yo I need this. I have cats that need to stop walking into my room. Don't need their cat hair in my bed.

techielew•1/17/24, 3:45 AM

Hey @abhishek awasthi, I've been doing some research on the difference between Yocto and buildroot. Any pointers?

Ttechielew Hey @abhishek awasthi, I've been doing some research on the difference between Y...

techielew•1/17/24, 3:46 AM

I'm trying to evaluate when makes sense to use which

Ttechielew Hey @abhishek awasthi, I've been doing some research on the difference between Y...

abhishek awasthi•1/17/24, 3:56 AM

... yocto is a bit more complicated when compared to builroot .. .. so like if one would start their journey ...i would suggest to start from buildroot environment ... understanding the basics of build process ... majour things are menuconfig there so can start fast and get their hands dirty ... where yocto would require a good learning curve in comparison ... at the end if you have a specific application and have selected the soc for it ..then check upon the vendor build documentation to understand the depth of details provided ...sometime they will tell you the preferred build environment ...and following that would be a good option... if you consider the build time ... buildroot might give you quicker results ... but it may start taking time upon further devlopements ...where as yocto would take a good amounts of time for initial builds but then for further build the build time reduces significantly ...
for the beginning explore buildroot ... once you feel comfortable with the environment ..you may shift to yocto ...

Aabhishek awasthi ... yocto is a bit more complicated when compared to builroot .. .. so like if o...

techielew•1/17/24, 4:17 AM

Is it just that buildroot is smaller? More compact, meaning shorter/less time to compile?

abhishek awasthi•1/17/24, 4:27 AM

its more specific to the board .. so lets say you have build for a board using buildroot and not you want to build the same for another board .. it would again take all the resources where as in a yocto project its more portable .. you can switch easily

abhishek awasthi•1/17/24, 4:29 AM

and yes buildroot is way smaller in comparison to yocto .. yocto can go around 50 gigs easily ..

tahenan•1/17/24, 4:30 AM

Hi,
This is Tahenan,
A Graduate Student in US trying jobs in Firmware/Embedded Development

Ttahenan Hi, This is Tahenan, A Graduate Student in US trying jobs in Firmware/Embedded ...

techielew•1/17/24, 4:40 AM

What's up, @tahenan. Welcome! Check out the #jobs channel and feel free to ping @Marcweb. Do you have any specific industries or roles you're looking to fill? Leave your deets here: jobsLooking for Work? Comment Here...

Discord

Discord - A New Way to Chat with Friends & Communities

Discord is the easiest way to communicate over voice, video, and text. Chat, hang out, and stay close with your friends and communities.

Aabhishek awasthi and yes buildroot is way smaller in comparison to yocto .. yocto can go around 5...

techielew•1/17/24, 4:43 AM

Thanks, I'm assuming you've implemented both in commercial projects, correct?

The general sentiment I've been getting from those I talk to is buildroot is common for more resource-constrained consumer electronics-type devices and Yocto is for bigger, more feature rich platforms.

Would be interested to hear from you or anyone else who has experience with either

Ttechielew Thanks, I'm assuming you've implemented both in commercial projects, correct? ...

abhishek awasthi•1/17/24, 5:35 AM

so apparently i havent got the commercial projects upon buildroot or yocto .. i have done one where i had build packages from scratch and complie then to make embedded linux ..busybox based environment ...

Ttechielew Thanks, I'm assuming you've implemented both in commercial projects, correct? ...

abhishek awasthi•1/17/24, 5:36 AM

... also like one can think buildroot and yocto like how we have kicad and altium ... i mean both of them does the job ... one is just a bit more on the professional side ...and more resources ...

Aabhishek awasthi so apparently i havent got the commercial projects upon buildroot or yocto .. i...

abhishek awasthi•1/17/24, 5:38 AM

i mean we all tinker around and learn ...

AJAY KUMAR V•1/17/24, 5:52 AM

AAJAY KUMAR V Hi

Phoenix•1/17/24, 5:56 AM

Hi welcome

Hemal•1/17/24, 5:58 AM

Hello Everyone, I'm a hardware engineer based in Dubai, just discovered this server from LinkedIn post.

AJAY KUMAR V•1/17/24, 6:01 AM

Thank you @Phoenix
I have done internship at some startup which is based in Bengaluru, Karnataka, India. Interested in Embedded system development (From requirement gathering till product delivery).
Currently looking for an opportunity to learn and grow.

HHemal Hello Everyone, I'm a hardware engineer based in Dubai, just discovered this ser...

techielew•1/17/24, 6:08 AM

What's up @hemalchevli. Welcome. What type of projects are you working on?

Ttechielew What's up @hemalchevli. Welcome. What type of projects are you working on?

Hemal•1/17/24, 6:14 AM

Currently working on Jetson carrier board at work and some ESP32 based projects at home

AAJAY KUMAR V Thank you @Phoenix I have done internship at some startup which is based in Ben...

Phoenix•1/17/24, 6:26 AM

nice, is your internship related to iot ? what's the startup about

HHemal Currently working on Jetson carrier board at work and some ESP32 based projects ...

techielew•1/17/24, 6:30 AM

Well if that isn't the range of hardware ahha

Ttechielew Welcome @gKarthikSai, you and @Navadeep would get along great! He's a fellow FPG...

gKarthikSai•1/17/24, 6:31 AM

Ive worked with basys 3 artix 7 dev board and mini lattice board......just got my self started with fpga's......sure would love to share my work here and will join the office hours........thanks for the invite

gKarthikSai•1/17/24, 6:36 AM

currently im working on a foc based bldc controller....for now ive used a stm32 but in future i would love seeing it having a fpga