VPforce Controls•2y ago

You ordering another one?

Sscheppie_40 year old and feeling that i am waiting on a gift like i am 12 😅

Bob Bushman•2/7/24, 2:37 PM

Same and it hasnt dissapointed.

CChunky Rat You ordering another one?

papiplanes•2/7/24, 11:42 PM

Nah just checking for when people ask on my videos

TripRodriguez•2/8/24, 1:53 AM

Hey guys, I'm putting a thrustmaster grip on for the first time (Hornet Grip). Doing a search here and elsewhere all I find is that TM is "default"... does that mean the "generic" setting in the dropdown for grips? If yes and I'm[ not missing something, then something isn't right. I'll have to check that no pins are bent as I've seen that before.

TripRodriguez•2/8/24, 2:14 AM

Connection looks fine, so pretty sure it's not that.

Andre•2/8/24, 5:57 AM

I'm using the TM Hornet grip with the generic setting and all buttons are recognised.

TripRodriguez•2/8/24, 7:56 AM

Thanks, I don't know what was going on but it seemed to fix it when I unplugged and replugged the grip to check the pins. I'll take it LOL.

TripRodriguez•2/8/24, 7:56 AM

Everything is working great now.

SimonSays•2/8/24, 8:57 AM

!stats

SSimonSays !stats

VPforceBot•2/8/24, 8:57 AM

Hey @SimonSays,
So the last Shipped RHINO is #0387 on 2024-02-07
Average waiting time from preorder to shipped is 214 days, median is 224 days, max is 415 days
382 Rhinos are shipped in total

VPforceBot•2/8/24, 9:54 AM

:package:

RHINO #0389 Has Shipped!

VPforceBot•2/8/24, 10:09 AM

:package:

RHINO #0390 Has Shipped!

VVPforceBot :package: 🇩🇪 **RHINO #0389** Has Shipped!

luap14.•2/8/24, 10:51 AM

It‘s on its way

VPforceBot•2/8/24, 2:41 PM

:package:

RHINO #0391 Has Shipped!

Pikas62•2/8/24, 4:17 PM

Now I'm officially u-hu (under hundred)!

Fish•2/9/24, 12:35 AM

New here, so I apologize in advance if I’m missing something obvious. Anyone know if the average total cost for the diy build is cheaper than the built base (I do not have a 3D printer so would outsource all of that)?
And what’s the average wait time for a diy kit? TIA

VVPforceBot :package: 🇺🇸 **RHINO #0390** Has Shipped!

Aileron_Hubbard•2/9/24, 12:36 AM

That's me

. Ugh I'm so amped! For those of you in the U.S how long did shipping take?

AndyHill•2/9/24, 12:48 AM

afaik the kits should ship pretty quickly

FFish New here, so I apologize in advance if I’m missing something obvious. Anyone kno...

Tinman•2/9/24, 1:28 AM

The cost difference should be minimal specially you need to outsource your 3d printing. You'd still need to buy Walmis' motors and that is the main bulk of the cost. Still, if you really pinch it, should be cheaper. Kit ships way faster tho, a few days at best, 2 weeks at worst I reckon.

TTinman The cost difference should be minimal specially you need to outsource your 3d pr...

Fish•2/9/24, 2:45 AM

Thank you! If I have no engineering/CAD background, but a little coding experience, is it even a feasible option? Or a lot of research and self-education required to make such a kit?

FFish Thank you! If I have no engineering/CAD background, but a little coding experien...

TheAmazinGreat•2/9/24, 4:39 AM

Here is what most are using with the 57 series motor kit.

https://github.com/protomaker964/Rhino-FFB-Clone-3D_Printed

GitHub

GitHub - protomaker964/Rhino-FFB-Clone-3D_Printed: 3D print files, ...

3D print files, parts list and instructions to build a DIY version of the Rhino FFB Stick base using the VPForce motor kit - GitHub - protomaker964/Rhino-FFB-Clone-3D_Printed: 3D print files, parts...

TheAmazinGreat•2/9/24, 4:41 AM

You will also need a grip that is compatible, TM/Virpil or winwing/VKB with their respective adapters.

TTheAmazinGreat Here is what most are using with the 57 series motor kit. https://github.com/pr...

Fish•2/9/24, 5:07 AM

TY!

FFish Thank you! If I have no engineering/CAD background, but a little coding experien...

Tinman•2/9/24, 6:14 AM

At best, you can figure it out by just looking at guides in this discord. At worst, you can always as Walmis and/or the other diy'ers in here.

VPforceBot•2/9/24, 8:24 AM

:package:

RHINO #0392 Has Shipped!

VPforceBot•2/9/24, 11:21 AM

:package:

RHINO #0394 Has Shipped!

VPforceBot•2/9/24, 11:41 AM

:package:

RHINO #0393 Has Shipped!

Wwalmis MFGs are in progress, but there is a bit of shortage for the largest 86BLF04 mot...

Col. Sanders•2/11/24, 4:04 AM

Any possibility of working directly with MFG to get the holes needed predrilled? I am looking at getting a set for your upcoming mod, and would love to not have to figure out how to drill through them.

Jon (Bounty_V)•2/11/24, 8:37 AM

That would be quite nice

Jon (Bounty_V)•2/11/24, 8:38 AM

I'd be much more inclined to order sooner rather than later were that the case. Even if it involved me contacting them to request it special and having to pay them extra to pre drill the holes

Snubblaren•2/11/24, 8:44 AM

Is it possible to like set the "ramp down temp" of the Motors at 50c and disable the fan?

CCol. Sanders Any possibility of working directly with MFG to get the holes needed predrilled?...

Zeeflyboy•2/11/24, 9:26 AM

A small 3Dprinted jig would probably be an easy way to make sure even the most careless drill user could get it installed without any problems.

TEMPEST•2/11/24, 10:57 AM

Does anyone know if you can get the Rhino ordered with the stronger motors so sustained high-g manoeuvres wouldn’t trip out the motors, which I’ve read it can with the standard motors?

Fierce_Fire•2/11/24, 11:04 AM

That's not the strength but the temperature of the motors iirc

AndyHill•2/11/24, 11:34 AM

it is possible that stronger motors would be able to handle the heat better, but afaik there are no motor options on the rhino currently

AndyHill•2/11/24, 11:35 AM

who knows what's in the future, of course

AndyHill•2/11/24, 11:35 AM

also pretty much any motor / cooling combination is going to start heating up at some point and the important question is where that point is and how relevant is it to you in particular

Fierce_Fire•2/11/24, 1:56 PM

I know I havent seen my motors go above 30c, but they are open, tho passive cooling and max current is about 20A (86BLF04)

TEMPEST•2/11/24, 3:04 PM

Thanks for the info. So what does that mean for an F14 driver who likes to pull hard and long? Does that mean I need to go DIY or will the basic Rhino be enough or is there a 3rd option?

CCol. Sanders Any possibility of working directly with MFG to get the holes needed predrilled?...

Red Magic•2/11/24, 3:36 PM

can't wait for MFGs v4s

Red Magic•2/11/24, 3:36 PM

I didn't realize there was apparently a v2 and 3 until a month ago when I opened up their website for the first time since I bought mine

AndyHill•2/11/24, 3:40 PM

if you max out the forces and do an extended full pull fight you might run into heat protection, if you do instant dogdights one after the other you will

AndyHill•2/11/24, 3:41 PM

at that point you will hear the fans kick in and forces will be reduced gradually until the cooling can cope with the produced heat

AndyHill•2/11/24, 3:42 PM

ambient temperature will have some effect

AndyHill•2/11/24, 3:43 PM

for me the equilibrium point was somewhere around 50% force or something like that I'm not sure, I got tired before the motors did

ZZeeflyboy A small 3Dprinted jig would probably be an easy way to make sure even the most c...

mechsicko•2/11/24, 4:47 PM

I've been printing drill jigs that use these common threaded drill bushings off Aliexpress and it works like a champ. I use them to tap holes as well, which keeps the tap perpendicular for the crucial beginning of the thread forming.

These things:

Sce0b2df4334041a2a4e959950b463faeg.jpg_640x640Q90.jpg_.jpg

mechsicko•2/11/24, 4:48 PM

Note: they commonly come in either M14x1.5 or M14x2.0. I prefer the 1.5 cause I'm printing the threads but probably best to pick one therad and stick to it

AAndyHill at that point you will hear the fans kick in and forces will be reduced graduall...

Red Magic•2/11/24, 5:20 PM

cant one when setting the ffb on pedals up just make the gear ratio favorable to the motor? So the motor won't have to fight you as hard, and you have to fight it more?

AndyHill•2/11/24, 7:00 PM

basically yes, but there's always a limit

Sunshine•2/12/24, 1:10 AM

My Brunner lasts only seconds if you pull hard continuously, but using trim to reduce back pressure helps.

TAGE•2/12/24, 4:48 AM

Anyone have any pictures of a Yaw2 + rhino?

You ordering another one?

Similar Threads

Similar Threads

Similar Threads